Uploaded November 2018 | Updated November 2026, 2 hours ago
Riley helped me figure out the issues from the first video... so now I have the capability of running the stepper motors from the two signals STEP and DIRECTION. This opens the door for robotics, LinuxCNC, and much more.
Part 1: youtu.be/KOdw9cKDDWA
If you do this... turn the potentiometer fully left (counterclockwise) then back off about 1/8 turn. Any more than that and the steppers will get pretty hot.
Be sure to subscribe and click the BELL so you get notifications!
Riley helped me figure out the issues from the first video... so now I have the capability of running the stepper motors from the two signals STEP and DIRECTION. This opens the door for robotics, LinuxCNC, and much more.
Part 1: youtu.be/KOdw9cKDDWA
If you do this... turn the potentiometer fully left (counterclockwise) then back off about 1/8 turn. Any more than that and the steppers will get pretty hot.
Be sure to subscribe and click the BELL so you get notifications!






