Uploaded November 2022 | Updated September 2026, 4 hours ago

---

Are you a cnc beginner looking for project ideas? In this project, you'll see me use my Onefinity CNC Woodworker X50 to build a black walnut serving tray using a 3/4 inch bowl bit and a 1/4 inch downcut bit, finished with Odie's Oil. Watch this video through to learn from my mistakes.

A perfect project in the CNC for dummies category, and better yet, you can see Part 1 of this project below, where you'll learn how to use VCarve Pro to design this catchall tray.

See Part 1, designing this project with VCarve Pro - youtu.be/qdJhI_Tm61Y

Products and Equipment Used
Onefinity CNC Store - onefinitycnc.com/cnc-machines

Odie's Oil Starter Kit - amzn.to/3UTpq2n
Makita Palm Router - amzn.to/3qNuvfi
CA Glue and Accelerator 4 Pack - amzn.to/3SdnfW0
WEN Spindle Sander - amzn.to/3Ti4GQn
Rubber Gloves - amzn.to/3zWp2bc
¾ Inch Bowl Bit - amzn.to/3Ee23en
¼ Inch Endmill Bit - amzn.to/3UuGThq
Dewalt 734 Planer - amzn.to/3zUIjtq
Sanding Discs - amzn.to/3NNz0RU
00:00 Introduction
01:10 Planing Rough Lumber
01:31 Cutting On The Onefinity
05:54 Lord Of The Dance
08:47 Sanding
10:23 Finish With Odie's Oil
11:45 What Would I Change?