Uploaded May 2026 | Updated September 2026, 3 weeks ago
Here’s pretty much everything I’ve learned about supports for 3D printing so far, but I know there’s still a long way to go. Learn from my mistakes!
•X2D: tidd.ly/4crVMeR
•H2C: tidd.ly/4bqNTH9
•Support Material for PLA: tidd.ly/4wlAdG0
⏱️Chapter Markers:
0:00 - Supports Have Changed…
1:45 - What Are Supports?
2:44 - When Should You Use Supports?
3:16 - What Material Should You Use For Supports?
4:44 - The Best Tip: Supports for Interface Only!
6:10 - Using More Than 2 Materials
7:39 - Issues I’ve Had
9:15 - Prime Towers?
10:05 - Sample Print & Support Removal
———————————————————————
Affiliate links earn a commission from qualifying purchases which helps support my channel at no additional cost to you.
All videos on the channel are created by me without the use of artificially generated assets for editing or production. The only AI here is my Average Intelligence.
——————————— CONNECT ———————————
Instagram & Socials: @sodarntom
Main Site: himynameistom.com
Discord: himynameistom.com/discord
Podcasts: himynameistom.com/podcasts
———————— ROYALTY FREE MUSIC ————————
•SoundMarket https://soundmarket.io?ref=TomBuck
•Epidemic Sound (30 Day Free Trial): share.epidemicsound.com/enthusiasm
——————————— VIDEO GEAR ———————————
•Ecamm Streaming Software: geni.us/ecammtom
•Sony FX3 (Main Camera): geni.us/fx3camera
•Sony a7SIII: geni.us/lYRYEc
•Sony a7V: geni.us/hyDyP
•Sony 24 1.4 (Main Lens): geni.us/sony24 (Amazon)
•Sony 50 1.8: geni.us/sonynifty50
•Tamron 20-40 2.8: geni.us/Rp3NeMc
•Zeiss 85 1.8: geni.us/zeissbatis (Amazon)
•Sony 70-200: bhpho.to/3B4tCr2
•DJI Osmo Pocket 3: geni.us/zdHDYCo (Amazon)
•YoloBox for Recording & Mobile Streams: geni.us/Gh3d1n
•Elgato Prompter: geni.us/elgatoprompter (Amazon)
•Anamorphic Lens: bhpho.to/309H0rV
•YoloCam S3 Webcam: geni.us/7Dy2Jaj
•OBSBOT Tail 2 PTZ Camera: geni.us/UvbR
•Rodecaster Video: bhpho.to/3Ub88j2
•Colorful HDMI Cables: geni.us/NeOn (Amazon)
•Colorful USB Cables: geni.us/rodeusbc (Amazon)
——————————— AUDIO GEAR ———————————
•Rodecaster Pro II: bhpho.to/3wCwaqI
•Sennheiser MKH 50: geni.us/mkh50 (Amazon)
•Shure SM7B: geni.us/tepsm7b (Amazon)
•Rode NT1 Signature: geni.us/rgjRyH (Amazon)
•Lewitt LCT 240 Pro: geni.us/4fww (Amazon)
•Sony Video Mic: bhpho.to/3ztb6Vb
•Tall Mic Arm: geni.us/A39EvH (Amazon)
•Short Mic Arm: geni.us/zc7hAbW (Amazon)
•Simple 2 Mic Wireless System: geni.us/wxwfX (Amazon)
•Sennheiser Pro Wireless System: bhpho.to/43JgqkL
•Rode Headphones: bhpho.to/3JNacqg
•Colorful XLR Cable: geni.us/bluexlr (Amazon)
———————————————————————
🎥 Check out my full gear list here:
himynameistom.com/gear
———————————————————————
– Who Am I? –
Hi! My name is Tom Buck, a lifelong A/V nerd and former high school Digital Media teacher. I started this channel in 2017 as a project to share my enthusiasm for everything related to audio and video production.
You can take a look at my bio to learn more about my background, both personally and professionally: himynameistom.com/about
My channel is open and welcoming to people of all races, ages, genders, and orientations. I’m glad you’re here.
•Read my Ethics Statement about reviews, sponsorships, and brand partnerships: himynameistom.com/ethics
———————————————————————
Episode 546: Multi Material Supports for 3D Printing
Here’s pretty much everything I’ve learned about supports for 3D printing so far, but I know there’s still a long way to go. Learn from my mistakes!
•X2D: tidd.ly/4crVMeR
•H2C: tidd.ly/4bqNTH9
•Support Material for PLA: tidd.ly/4wlAdG0
⏱️Chapter Markers:
0:00 - Supports Have Changed…
1:45 - What Are Supports?
2:44 - When Should You Use Supports?
3:16 - What Material Should You Use For Supports?
4:44 - The Best Tip: Supports for Interface Only!
6:10 - Using More Than 2 Materials
7:39 - Issues I’ve Had
9:15 - Prime Towers?
10:05 - Sample Print & Support Removal
———————————————————————
Affiliate links earn a commission from qualifying purchases which helps support my channel at no additional cost to you.
All videos on the channel are created by me without the use of artificially generated assets for editing or production. The only AI here is my Average Intelligence.
——————————— CONNECT ———————————
Instagram & Socials: @sodarntom
Main Site: himynameistom.com
Discord: himynameistom.com/discord
Podcasts: himynameistom.com/podcasts
———————— ROYALTY FREE MUSIC ————————
•SoundMarket https://soundmarket.io?ref=TomBuck
•Epidemic Sound (30 Day Free Trial): share.epidemicsound.com/enthusiasm
——————————— VIDEO GEAR ———————————
•Ecamm Streaming Software: geni.us/ecammtom
•Sony FX3 (Main Camera): geni.us/fx3camera
•Sony a7SIII: geni.us/lYRYEc
•Sony a7V: geni.us/hyDyP
•Sony 24 1.4 (Main Lens): geni.us/sony24 (Amazon)
•Sony 50 1.8: geni.us/sonynifty50
•Tamron 20-40 2.8: geni.us/Rp3NeMc
•Zeiss 85 1.8: geni.us/zeissbatis (Amazon)
•Sony 70-200: bhpho.to/3B4tCr2
•DJI Osmo Pocket 3: geni.us/zdHDYCo (Amazon)
•YoloBox for Recording & Mobile Streams: geni.us/Gh3d1n
•Elgato Prompter: geni.us/elgatoprompter (Amazon)
•Anamorphic Lens: bhpho.to/309H0rV
•YoloCam S3 Webcam: geni.us/7Dy2Jaj
•OBSBOT Tail 2 PTZ Camera: geni.us/UvbR
•Rodecaster Video: bhpho.to/3Ub88j2
•Colorful HDMI Cables: geni.us/NeOn (Amazon)
•Colorful USB Cables: geni.us/rodeusbc (Amazon)
——————————— AUDIO GEAR ———————————
•Rodecaster Pro II: bhpho.to/3wCwaqI
•Sennheiser MKH 50: geni.us/mkh50 (Amazon)
•Shure SM7B: geni.us/tepsm7b (Amazon)
•Rode NT1 Signature: geni.us/rgjRyH (Amazon)
•Lewitt LCT 240 Pro: geni.us/4fww (Amazon)
•Sony Video Mic: bhpho.to/3ztb6Vb
•Tall Mic Arm: geni.us/A39EvH (Amazon)
•Short Mic Arm: geni.us/zc7hAbW (Amazon)
•Simple 2 Mic Wireless System: geni.us/wxwfX (Amazon)
•Sennheiser Pro Wireless System: bhpho.to/43JgqkL
•Rode Headphones: bhpho.to/3JNacqg
•Colorful XLR Cable: geni.us/bluexlr (Amazon)
———————————————————————
🎥 Check out my full gear list here:
himynameistom.com/gear
———————————————————————
– Who Am I? –
Hi! My name is Tom Buck, a lifelong A/V nerd and former high school Digital Media teacher. I started this channel in 2017 as a project to share my enthusiasm for everything related to audio and video production.
You can take a look at my bio to learn more about my background, both personally and professionally: himynameistom.com/about
My channel is open and welcoming to people of all races, ages, genders, and orientations. I’m glad you’re here.
•Read my Ethics Statement about reviews, sponsorships, and brand partnerships: himynameistom.com/ethics
———————————————————————
Episode 546: Multi Material Supports for 3D Printing
