Lawnmower Stops when HOT. 1 Common Reason! @TheRepairSpecialist
Lawnmower Stops when HOT. 1 Common Reason!  @TheRepairSpecialist
Uploaded March 2024 | Updated September 2026, 1 week ago
A malfunctioning ignition coil may be the reason behind a lawnmower that shuts off when it becomes too hot. The high-voltage electrical spark required to ignite the fuel-air combination in the engine's combustion chamber is produced by the ignition coil. When the ignition coil starts to malfunction, it might operate correctly when it's cold but not when it gets hot. After the engine reaches a particular temperature, this may lead to a weaker or sporadic spark, which could cause the engine to misfire or stall.

Furthermore, when exposed to heat, a malfunctioning ignition coil may develop internal shorts or insulation failure, which would result in total loss of spark and engine shutdown.

It can be difficult to diagnose an ignition coil problem because the symptoms may not appear right away when the engine is heating up. Engine stalling or misfiring while the engine is under load or at higher temperatures are common indicators that the ignition coil is deteriorating. Other symptoms include weak or sporadic spark. Ignition coil problems can be detected with the use of diagnostic testing, such as measuring the resistance of the coil or performing a spark test.

To fix the issue and guarantee dependable engine performance, especially in hot weather, the defective ignition coil must usually be replaced with a new one that meets the right requirements. To maintain the lawnmower operating smoothly for the duration of its life, ignition coil failures can be avoided with routine inspection and repair of the system's component parts.

Have a great day

Craig (Owner and Creator of The Repair Specialist Channel)
Lawnmower Stops when HOT. 1 Common Reason!Will This Amazon Rebuild Kit Save This Chainsaw? (Part.1 of 5)How a Multimeter REALLY Measures Voltage – From Electrons to the 9.00V DisplayWill This Amazon Parts Rebuilt Chainsaw Finally Run??? (Part 5 0f 5)The T-Screw on your Chainsaw. What is it?Respectable Setting for 2-Stroke Carburetor Fuel Adjuster Screws (Chainsaw Carburetor)The EASIEST way to Untangle any Chainsaw Chain Knot...This helps to Press Fit Bearing into Seal Husqvarna ChainsawTry this to Fit the Gasket Correctly Every time (2-Stroke Carburetor, Chainsaw)Can 2 Stroke oil Self Separate from Fuel??The Lawnmowers Safety Brake Works like This! (by Craig Kirkman)Mixed Up Your H & L Screws? Do this!!
TheRepairSpecialist |

Lawnmower Stops when HOT. 1 Common Reason!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER