Uploaded November 2026 | Updated November 2026, 2 days ago
The initial checkout of a Lasko 16" oscillating stand/pedestal fan model 2116. This unit dates back to 1998, assuming the rear guard schema was the same as the tabletop versions.
This series of fans is very nostalgic to me. My grandparents' had a 12" desktop version since the 90s. I remember seeing that same model out in the wild a number of times over the years. I also remember seeing the 12" pedestal version in some classrooms during the 2000s. The 16" version looks so odd after looking at the 12" for so many years, the proportions are very different.
This was recovered from the trash, and this is yet another instance where I truly cannot fathom why this was discarded. It needs a little cleaning, but otherwise is still perfectly good. The stand is stable, the speed knob is there, aside from a negligible crack on the rear guard nothing is broken, still runs smooth and strong. What a waste this would have been.
Nostalgia aside, these were very powerful fans. Lasko didn't seen to really cheapen out on the performance of the fans until the mid 2000s. I would put one of these up against many plastic box fans models, even reputable ones from the 90s and older.
This one appears to be in particularly good condition underneath the dirt. I suspect this will clean up to look and run like new.
The initial checkout of a Lasko 16" oscillating stand/pedestal fan model 2116. This unit dates back to 1998, assuming the rear guard schema was the same as the tabletop versions.
This series of fans is very nostalgic to me. My grandparents' had a 12" desktop version since the 90s. I remember seeing that same model out in the wild a number of times over the years. I also remember seeing the 12" pedestal version in some classrooms during the 2000s. The 16" version looks so odd after looking at the 12" for so many years, the proportions are very different.
This was recovered from the trash, and this is yet another instance where I truly cannot fathom why this was discarded. It needs a little cleaning, but otherwise is still perfectly good. The stand is stable, the speed knob is there, aside from a negligible crack on the rear guard nothing is broken, still runs smooth and strong. What a waste this would have been.
Nostalgia aside, these were very powerful fans. Lasko didn't seen to really cheapen out on the performance of the fans until the mid 2000s. I would put one of these up against many plastic box fans models, even reputable ones from the 90s and older.
This one appears to be in particularly good condition underneath the dirt. I suspect this will clean up to look and run like new.





![52 Hunter 22272 The Original Ceiling Fan in Brown/Brass with Cane Blades | Computer Room Install
A 52 Hunter 22272 The Original ceiling fan in brown/polished brass with cane blades installed in the computer. This is a 2-speed non-reversible model with shaded pole motor. I believe the unit dates back to the late 1970s or 1980s.
This is an insanely powerful fan. The PSC-powered versions of The Original are objectively the best residential grade ceiling fans ever made. This fan pushes significantly more air than all other residential grade fans Ive tested and is nearly silent during operation. These are a rare case where you get looks, performance, reliability, and longevity all in one package.
Unfortunately this one does have some issues; it came to me with a mis-matched set of irons which causes significant wobble and the mounting system is incomplete. I am seeking replacements for these 2 components.
The specifications I measured during the video are as followed, in the format of [Current (amps) / Power (watts) / Power Factor / Speed (RPM) / Air flow volume (CFM) / Efficiency (CFM/watt)].
High: 2.48 / 155 / 0.52 / 196 / 9,912 / 64.
Low: 1.2 / 76.5 / 0.51 / 105 / 5,782 / 76. 52 Hunter 22272 The Original Ceiling Fan in Brown/Brass with Cane Blades | Computer Room Install](https://i.ytimg.com/vi/yYQbBJOSE-I/mqdefault.jpg)




