Uploaded September 2024 | Updated November 2026, 8 hours ago
The Algolaser DIY Kit MK2 is a laser engraver that is designed to user-friendly. It uses what the company calls the AlgoOS which is designed to enable laser engraving without using a computer or third-party software. However, it can still take advantage of software such as Lightburn if you choose. Let's check it out!
******************************************************************************************************
🟨Buy the Algolaser DIY Kit MK2: algolaser.com/products/algolaser-diy-kit-mk2-diode-laser-engraver?variant=50120359379251&sca_ref=6985276.Xiq9dfbNtR&utm_source=youtube&utm_medium=socialmedia&utm_campaign=affiliate
🟨Laser Etched Floppy Disk Coaster: thingiverse.com/thing:622747
******************************************************************************************************
Chapters
0:00 What Is It?
1:16 Basic Specs
2:05 Assembly
3:41 Buttons & Safety Features
4:45 AlgoOS 2.0 Rundown
6:41 Test Engraving Setup
10:33 Leveling the Laser
11:09 Engraving Result
11:28 Laser Cutting/Engraving Samples
16:52 Final Thoughts
******************************************************************************************************
Coupons and Deals:
JLC3DP 3D Printing Starts at $0.3, Up to $60 New User Coupons Here: jlc3dp.com/?from=FigureFeedback
Card Mafia: Use the Promo Code "FigureFeedback5Off" for 5% Off Your Card Mafia Purchase! : https://www.cardmafia.com?sca_ref=2492569.wSUwkQ9aSr
******************************************************************************************************
Socials:
Check out my other channel: youtube.com/@JeremyHill
For business inquiries, email me at jeremy@figurefeedback.com
Follow on Threads: threads.net/@jeremythill
Follow on Instagram: instagram.com/figurefeedback
******************************************************************************
My 3D Printing Equipment (Affiliate Links)
🟨Bambu Lab A1: shrsl.com/4k1rr
🟨Flashforge Adventurer 5M Pro: amzn.to/3ScGDou
🟨Flashforge Adventurer 5M: amzn.to/4cFMISl
🟨Flashforge Adventurer 5M Enclosure Kit: amzn.to/3Y5GmYf
🟨Anycubic Photon Mono 4K: amzn.to/3odVEKT
🟨Anycubic Wash and Cure 2.0: amzn.to/3pH41ii
🟨Anycubic 3D Printing Grey Resin: amzn.to/3Wdv8xK
🟨OnePeng Grey Model Resin: amzn.to/453cIDF
🟨Anycubic Eco UV Grey Resin: amzn.to/45cB4ei
🟨Siraya Tech Easy Grey Resin: amzn.to/3MyZCam
🟨Mealos Silicon Mat: amzn.to/3pRJoAg
🟨Gorilla Super Glue Gel: amzn.to/42c4TcA
🟨Vallejo Model Air Set: amzn.to/3oTfGdP
🟨Timbertech Airbrush Kit: amzn.to/3CbuuI0
🟨Creality Ender 3 Pro: amzn.to/45dvGIe
🟨Creality Rainbow PLA Filament: amzn.to/3WfYLP9
🟨Inland Silver PLA Plus Filament: amzn.to/3BxpHQO
🟨Inland Grey PLA Plus Filament 2-Pack: amzn.to/432tmSg
The Algolaser DIY Kit MK2 is a laser engraver that is designed to user-friendly. It uses what the company calls the AlgoOS which is designed to enable laser engraving without using a computer or third-party software. However, it can still take advantage of software such as Lightburn if you choose. Let's check it out!
******************************************************************************************************
🟨Buy the Algolaser DIY Kit MK2: algolaser.com/products/algolaser-diy-kit-mk2-diode-laser-engraver?variant=50120359379251&sca_ref=6985276.Xiq9dfbNtR&utm_source=youtube&utm_medium=socialmedia&utm_campaign=affiliate
🟨Laser Etched Floppy Disk Coaster: thingiverse.com/thing:622747
******************************************************************************************************
Chapters
0:00 What Is It?
1:16 Basic Specs
2:05 Assembly
3:41 Buttons & Safety Features
4:45 AlgoOS 2.0 Rundown
6:41 Test Engraving Setup
10:33 Leveling the Laser
11:09 Engraving Result
11:28 Laser Cutting/Engraving Samples
16:52 Final Thoughts
******************************************************************************************************
Coupons and Deals:
JLC3DP 3D Printing Starts at $0.3, Up to $60 New User Coupons Here: jlc3dp.com/?from=FigureFeedback
Card Mafia: Use the Promo Code "FigureFeedback5Off" for 5% Off Your Card Mafia Purchase! : https://www.cardmafia.com?sca_ref=2492569.wSUwkQ9aSr
******************************************************************************************************
Socials:
Check out my other channel: youtube.com/@JeremyHill
For business inquiries, email me at jeremy@figurefeedback.com
Follow on Threads: threads.net/@jeremythill
Follow on Instagram: instagram.com/figurefeedback
******************************************************************************
My 3D Printing Equipment (Affiliate Links)
🟨Bambu Lab A1: shrsl.com/4k1rr
🟨Flashforge Adventurer 5M Pro: amzn.to/3ScGDou
🟨Flashforge Adventurer 5M: amzn.to/4cFMISl
🟨Flashforge Adventurer 5M Enclosure Kit: amzn.to/3Y5GmYf
🟨Anycubic Photon Mono 4K: amzn.to/3odVEKT
🟨Anycubic Wash and Cure 2.0: amzn.to/3pH41ii
🟨Anycubic 3D Printing Grey Resin: amzn.to/3Wdv8xK
🟨OnePeng Grey Model Resin: amzn.to/453cIDF
🟨Anycubic Eco UV Grey Resin: amzn.to/45cB4ei
🟨Siraya Tech Easy Grey Resin: amzn.to/3MyZCam
🟨Mealos Silicon Mat: amzn.to/3pRJoAg
🟨Gorilla Super Glue Gel: amzn.to/42c4TcA
🟨Vallejo Model Air Set: amzn.to/3oTfGdP
🟨Timbertech Airbrush Kit: amzn.to/3CbuuI0
🟨Creality Ender 3 Pro: amzn.to/45dvGIe
🟨Creality Rainbow PLA Filament: amzn.to/3WfYLP9
🟨Inland Silver PLA Plus Filament: amzn.to/3BxpHQO
🟨Inland Grey PLA Plus Filament 2-Pack: amzn.to/432tmSg










