Uploaded September 2020 | Updated November 2026, 3 hours ago
On 31 August, the lower cylinder of the ITER cryostat was lowered into the assembly pit.
The ITER cryostat—the largest stainless steel high-vacuum pressure chamber ever built (16,000 m³)—provides the high vacuum, ultra-cool environment for the ITER vacuum vessel and the superconducting magnets.
Nearly 30 metres wide and as many in height, the internal diameter of the cryostat (28 metres) has been determined by the size of the largest components its surrounds: the two largest poloidal field coils. Manufactured from stainless steel, the cryostat weighs 3,850 tonnes. Its base section—1,250 tonnes—will be the single largest load of ITER Tokamak assembly.
The cryostat has 23 penetrations to allow access for maintenance as well as over 200 penetrations—some as large as four metres in size—that provide access for cooling systems, magnet feeders, auxiliary heating, diagnostics, and the removal of blanket sections and parts of the divertor.
Know more about ITER here : iter.org/mach
𝗦𝗨𝗕𝗦𝗖𝗥𝗜𝗕𝗘 : bit.ly/31Ex8Dt
𝗖𝗼𝗻𝗻𝗲𝗰𝘁 𝗪𝗶𝘁𝗵 𝗨𝘀:
𝗟𝗶𝗸𝗲 𝗨𝘀 𝗢𝗻 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸: bit.ly/3fMlWJV
𝗙𝗼𝗹𝗹𝗼𝘄 𝗨𝘀 𝗢𝗻 𝗜𝗻𝘀𝘁𝗮𝗴𝗿𝗮𝗺: bit.ly/2DOY3US
𝗧𝘄𝗲𝗲𝘁 𝗨𝘀 : bit.ly/31EDcMa
𝗩𝗶𝘀𝗶𝘁 𝗨𝘀: bit.ly/33IAkAy
On 31 August, the lower cylinder of the ITER cryostat was lowered into the assembly pit.
The ITER cryostat—the largest stainless steel high-vacuum pressure chamber ever built (16,000 m³)—provides the high vacuum, ultra-cool environment for the ITER vacuum vessel and the superconducting magnets.
Nearly 30 metres wide and as many in height, the internal diameter of the cryostat (28 metres) has been determined by the size of the largest components its surrounds: the two largest poloidal field coils. Manufactured from stainless steel, the cryostat weighs 3,850 tonnes. Its base section—1,250 tonnes—will be the single largest load of ITER Tokamak assembly.
The cryostat has 23 penetrations to allow access for maintenance as well as over 200 penetrations—some as large as four metres in size—that provide access for cooling systems, magnet feeders, auxiliary heating, diagnostics, and the removal of blanket sections and parts of the divertor.
Know more about ITER here : iter.org/mach
𝗦𝗨𝗕𝗦𝗖𝗥𝗜𝗕𝗘 : bit.ly/31Ex8Dt
𝗖𝗼𝗻𝗻𝗲𝗰𝘁 𝗪𝗶𝘁𝗵 𝗨𝘀:
𝗟𝗶𝗸𝗲 𝗨𝘀 𝗢𝗻 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸: bit.ly/3fMlWJV
𝗙𝗼𝗹𝗹𝗼𝘄 𝗨𝘀 𝗢𝗻 𝗜𝗻𝘀𝘁𝗮𝗴𝗿𝗮𝗺: bit.ly/2DOY3US
𝗧𝘄𝗲𝗲𝘁 𝗨𝘀 : bit.ly/31EDcMa
𝗩𝗶𝘀𝗶𝘁 𝗨𝘀: bit.ly/33IAkAy










