Uploaded October 2026 | Updated November 2026, 3 days ago
Learn CO₂ ejector welding best practices to safely weld the Danfoss large CO₂ ejector into transcritical CO₂ system piping.
In this video, we demonstrate how to weld the Danfoss large CO₂ ejector housing into piping in a transcritical CO₂ system. You will see the full welding procedure on a workbench, which mirrors the steps you must follow on-site when welding the ejector housing into a CO₂ system operating up to 140 bar.
We cover:
- What to prepare before welding the CO₂ ejector housing
- How to clean and align the ejector connections and piping correctly
- Why you must never weld with internal parts inside the ejector housing
- Which welding method to use (TIG) and why it is preferred
- The correct filler material (ER309L) for carbon steel housing to stainless steel piping
- How and why to use protection gas (argon) to avoid oxidation, corrosion, and porosity
- How to perform spot welding, root welding, and fill (cover) welding on thick connectors
- When additional cooling (e.g., wet cloth) is required if using a one-step weld
You will also learn why mechanical stress on the connections must be avoided, how to maintain the correct 1–2 mm gap for strong butt welds, and how to protect the internal surfaces of the ejector housing from heat and welding debris to prevent future malfunction.
This video focuses only on welding the Danfoss CO₂ ejector housing into the piping. It does not explain how the ejector works, which CO₂ systems it is used in, general installation, assembly after welding, or electrical connection and startup. Separate Danfoss videos cover those topics in detail.
For full technical data, installation guides, and welding recommendations for Danfoss CO₂ ejectors, please visit danfoss.com.
Find out more:danfoss.com/en/products/dcs/valves/electric-expansion-valves/large-ejector-solution/?utm_source=YouTube&utm_medium=social_organic&utm_campaign=Large_ejector_cid_7199138
#CO₂EjectorWelding #TranscriticalCO₂ #DanfossCO₂Ejector
Subscribe to our channel: youtube.com/c/DanfossClimate
Connect with us:
Danfoss Climate Solutions: danfoss.com/en/about-danfoss/our-businesses/climate-solutions
LinkedIn: linkedin.com/company/DanfossClimate
Instagram: instagram.com/DanfossInstallerLife
Facebook: facebook.com/danfossclimate
Danfoss Climate Solutions provides integrated, energy-efficient heating and cooling solutions to enable sustainable development in buildings, cold chains, industrial applications, and infrastructure.
With end-to-end application expertise and a broad product portfolio, we’re leading the way to a greener future and helping our customers do more with less.
Backed by our advanced components, systems, and software, we are actively engineering tomorrow's HVACR technology with a focus on:
- Innovative, reliable, and energy-efficient heating and cooling solutions
- World-class expertise with local relevance
- Integrated solutions for the entire HVACR ecosystem
Learn CO₂ ejector welding best practices to safely weld the Danfoss large CO₂ ejector into transcritical CO₂ system piping.
In this video, we demonstrate how to weld the Danfoss large CO₂ ejector housing into piping in a transcritical CO₂ system. You will see the full welding procedure on a workbench, which mirrors the steps you must follow on-site when welding the ejector housing into a CO₂ system operating up to 140 bar.
We cover:
- What to prepare before welding the CO₂ ejector housing
- How to clean and align the ejector connections and piping correctly
- Why you must never weld with internal parts inside the ejector housing
- Which welding method to use (TIG) and why it is preferred
- The correct filler material (ER309L) for carbon steel housing to stainless steel piping
- How and why to use protection gas (argon) to avoid oxidation, corrosion, and porosity
- How to perform spot welding, root welding, and fill (cover) welding on thick connectors
- When additional cooling (e.g., wet cloth) is required if using a one-step weld
You will also learn why mechanical stress on the connections must be avoided, how to maintain the correct 1–2 mm gap for strong butt welds, and how to protect the internal surfaces of the ejector housing from heat and welding debris to prevent future malfunction.
This video focuses only on welding the Danfoss CO₂ ejector housing into the piping. It does not explain how the ejector works, which CO₂ systems it is used in, general installation, assembly after welding, or electrical connection and startup. Separate Danfoss videos cover those topics in detail.
For full technical data, installation guides, and welding recommendations for Danfoss CO₂ ejectors, please visit danfoss.com.
Find out more:danfoss.com/en/products/dcs/valves/electric-expansion-valves/large-ejector-solution/?utm_source=YouTube&utm_medium=social_organic&utm_campaign=Large_ejector_cid_7199138
#CO₂EjectorWelding #TranscriticalCO₂ #DanfossCO₂Ejector
Subscribe to our channel: youtube.com/c/DanfossClimate
Connect with us:
Danfoss Climate Solutions: danfoss.com/en/about-danfoss/our-businesses/climate-solutions
LinkedIn: linkedin.com/company/DanfossClimate
Instagram: instagram.com/DanfossInstallerLife
Facebook: facebook.com/danfossclimate
Danfoss Climate Solutions provides integrated, energy-efficient heating and cooling solutions to enable sustainable development in buildings, cold chains, industrial applications, and infrastructure.
With end-to-end application expertise and a broad product portfolio, we’re leading the way to a greener future and helping our customers do more with less.
Backed by our advanced components, systems, and software, we are actively engineering tomorrow's HVACR technology with a focus on:
- Innovative, reliable, and energy-efficient heating and cooling solutions
- World-class expertise with local relevance
- Integrated solutions for the entire HVACR ecosystem



