BMSWEB | LaForge V2 vs True-D V3 / NexWave | Real World 7 Quad Race Testing @BMSWEB | Uploaded 7 years ago | Updated 13 hours ago
In this round of testing we compared both systems to the Nexwave module which is what both Thomas and I have been using since switching from SkyZone Goggles to the FatShark Dominator V3.
The personal expectation here was to upgrade to a module that would provide us with improved performance.
It's also worth mentioning that both of Thomas and I run identical quads with the exception of motors used. Both Goggles used Skew Planar antennas and the Diversity Module also included the MenaceRC.co.uk Patch antenna.
This round of testing has taken a while to do purely because of the wait for 7 quad races to test this. Anyway I hope you found this video useful.
Please note all the common sense stuff like Calibration etc were done. Goggles used were the Dominator V3
Both Quads were running the following:
Helix Current Configuration
- - - - - - - - - - - - - -
ImpulseRC Helix ZX5
http://impulserc.com/helix-zx5-fpv-racing-frame
ImpulseRC FC
T-Motor F-40Pro II 2400kv (Thomas) T-Motor F-40 II 2400kv (Paul)
VTx ImpulseRC
TBS Triumph
F30A 30amp ESCs (DShot 600)
HS1177 Camera - 2.1mm Lens
45 Degree Camera Tilt
BetaFligt 3.0.1
Like us on our FaceBook Page & Twitter
http://www.facebook.com/BmswebYoutube
twitter.com/BMSwebYouTube
instagram.com/bmsweb
http://periscope.tv/bmswebyoutube
In this round of testing we compared both systems to the Nexwave module which is what both Thomas and I have been using since switching from SkyZone Goggles to the FatShark Dominator V3.
The personal expectation here was to upgrade to a module that would provide us with improved performance.
It's also worth mentioning that both of Thomas and I run identical quads with the exception of motors used. Both Goggles used Skew Planar antennas and the Diversity Module also included the MenaceRC.co.uk Patch antenna.
This round of testing has taken a while to do purely because of the wait for 7 quad races to test this. Anyway I hope you found this video useful.
Please note all the common sense stuff like Calibration etc were done. Goggles used were the Dominator V3
Both Quads were running the following:
Helix Current Configuration
- - - - - - - - - - - - - -
ImpulseRC Helix ZX5
http://impulserc.com/helix-zx5-fpv-racing-frame
ImpulseRC FC
T-Motor F-40Pro II 2400kv (Thomas) T-Motor F-40 II 2400kv (Paul)
VTx ImpulseRC
TBS Triumph
F30A 30amp ESCs (DShot 600)
HS1177 Camera - 2.1mm Lens
45 Degree Camera Tilt
BetaFligt 3.0.1
Like us on our FaceBook Page & Twitter
http://www.facebook.com/BmswebYoutube
twitter.com/BMSwebYouTube
instagram.com/bmsweb
http://periscope.tv/bmswebyoutube
