Uploaded August 2021 | Updated September 2026, 1 week ago
If your speakers are not phase compatible through the region where you want to combine them, the sum may have large peaks and dips even after performing the autoalign function.
To confirm, export your measurements and open them in another audio analyzer where the IR delay can be adjusted to make the phase data actionable. While you may not be able to fix this without all-pass filters in the P1, you can do your best to limit the damage.
P1: l-acoustics.com/products/p1
How to practice alignment of main to front-fill from different manufacturers: youtu.be/6zL6PFLboFw
Tracebook: trace-book.org
___
๐ Start supporting Sound Design Live today for as little as $5/month on Patreon: patreon.com/sounddesignlive
___
๐ Get Started with Sound System Tuning - sounddesignlive.com/get-started-with-sound-system-tuning
___
๐จโ๐ SOUND SYSTEM TUNING ONLINE COURSE - proaudioworkshopseeingsound.com
___
๐ Books on sound system tuning - sounddesignlive.com/audio-engineer-training-programs
๐ Podcast for live sound engineers - sounddesignlive.com/pro-audio-podcast
___
Smaartยฎ and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Be friendly
Facebook - facebook.com/sounddesignlive
Twitter - twitter.com/nathandofrango
LinkedIn - linkedin.com/in/nathanlively
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
If your speakers are not phase compatible through the region where you want to combine them, the sum may have large peaks and dips even after performing the autoalign function.
To confirm, export your measurements and open them in another audio analyzer where the IR delay can be adjusted to make the phase data actionable. While you may not be able to fix this without all-pass filters in the P1, you can do your best to limit the damage.
P1: l-acoustics.com/products/p1
How to practice alignment of main to front-fill from different manufacturers: youtu.be/6zL6PFLboFw
Tracebook: trace-book.org
___
๐ Start supporting Sound Design Live today for as little as $5/month on Patreon: patreon.com/sounddesignlive
___
๐ Get Started with Sound System Tuning - sounddesignlive.com/get-started-with-sound-system-tuning
___
๐จโ๐ SOUND SYSTEM TUNING ONLINE COURSE - proaudioworkshopseeingsound.com
___
๐ Books on sound system tuning - sounddesignlive.com/audio-engineer-training-programs
๐ Podcast for live sound engineers - sounddesignlive.com/pro-audio-podcast
___
Smaartยฎ and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Be friendly
Facebook - facebook.com/sounddesignlive
Twitter - twitter.com/nathandofrango
LinkedIn - linkedin.com/in/nathanlively
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
