Lab Review: Layer 3 Switching w/ Routed Ports @networkupskill
Lab Review: Layer 3 Switching w/ Routed Ports  @networkupskill
Uploaded December 2025 | Updated November 2026, 10 hours ago
A layer 3 switch, also called a multilayer switch, must perform both layer 2 switching and layer 3 routing. In each LAN design, you can identify where the switches need to perform each function. And when the goal is routing to a single neighboring device, it makes sense to use the feature we practice in this next lab: Routed Ports.

This next lab gives you many reps configuring routed ports between layer 3 switches, sometimes connected to other layer 3 switches, and at other times to routers. Your job: Sift through the configuration options and make every layer 3 link work. Then verify they all work with pings and show commands!
This video reviews the answers to the lab and demonstrates the lab. If you haven’t done the lab yet… do the lab first!

πŸ“˜ Matches CCNA Official Cert Guide:
*Volume 1 Chapter 18 Section 3A*


*Chapters*
00:00 Introduction
00:56 IP Address Planning
02:25 Configuration Review
05:16 Lab Demo


*Config Lab Blog Page:*
CLAB302: Layer 3 Switching Using Routed Ports
πŸ‘©πŸΌβ€πŸ’» certskills.com/clab302

*The Related Config Lab Intro Video:*
πŸ“½οΈ youtu.be/bBzCMUgEIug


*The Related Instructional Video about Routed Ports*
πŸ“½οΈ youtu.be/z9-MHYZrShc


*πŸ“½οΈ Lab Tools and Labs Playlist:* youtube.com/playlist?list=PLhDAmDsTz9XfxFJCydqlcjvO4gT6xTPgj


========================================
*Product Links*
Product links below. I make a small affiliate sales commission if you buy something!

CCNA Library (Two Book Set):
πŸ“š ccna.link/nu-cp-lib-ed2

All CCNA products at Cisco Press:
πŸ–¨οΈ ccna.link/nu-cp-allccna

All Wendell's products at Cisco Press:
πŸ§”πŸΌβ€β™‚οΈ ccna.link/nu-cp-allwo

Ciscopress.com/NewCerts Page (News, Announcements):
πŸ“° ccna.link/nu-cp-newcerts
=========================================
Lab Review: Layer 3 Switching w/ Routed PortsWhy Did My Switch Port Fail?Config Lab Intro: Practice OSPF Router ID Selection RulesTroubleshooting is BACK! CCNA v2.0 Blueprint BreakdownConfig Lab Intro: Layer 3 Switching Lab 1Config Lab Review: Layer 3 Switching Lab 1Config Lab Intro: BIG IP Routing Lab 1Practice Right Now! The Ping Command (on Hosts)How to Get the Most Out of Cisco Live RemotelySubnetting Patterns: Subnet a Class B Network with /24 Mask (Easier)Cisco Router Interface Config Options: From IP Addresses to BandwidthEssential Guide to Inter-VLAN IP Routing Using Router-on-a-Stick
Wendell Odoms Network Upskill |

Lab Review: Layer 3 Switching w/ Routed Ports

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER