![[L101] MT5+ Picked and Gutted @RetepReyem](https://i.ytimg.com/vi/nLaZV8Oues8/hqdefault.jpg)
Uploaded October 2022 | Updated September 2026, 16 hours ago
MT5+ is a 5 pin in pin with 5 springless sliders and the "alpha driver" interactive. My example had spooled inner pins with milled key pins and over milling on the chambers. I found this to be and enjoyable picking experience. Thanks for watching and cheers. Feel free to like comments and subscribe.
00:00 Lock operation
00:18 Visual check on sidebar
01:34 Sidebar passes visual test and picking starts
03:50 Picked
05:59 Gutting starts
14:46 Tools and some talk
16:19 Close up thanks and cheers
MT5+ is a 5 pin in pin with 5 springless sliders and the "alpha driver" interactive. My example had spooled inner pins with milled key pins and over milling on the chambers. I found this to be and enjoyable picking experience. Thanks for watching and cheers. Feel free to like comments and subscribe.
00:00 Lock operation
00:18 Visual check on sidebar
01:34 Sidebar passes visual test and picking starts
03:50 Picked
05:59 Gutting starts
14:46 Tools and some talk
16:19 Close up thanks and cheers
![[L101] MT5+ Picked and Gutted](https://i.ytimg.com/vi/nLaZV8Oues8/mqdefault.jpg "[L101] MT5+ Picked and Gutted
MT5+ is a 5 pin in pin with 5 springless sliders and the alpha driver interactive. My example had spooled inner pins with milled key pins and over milling on the chambers. I found this to be and enjoyable picking experience. Thanks for watching and cheers. Feel free to like comments and subscribe.
00:00 Lock operation
00:18 Visual check on sidebar
01:34 Sidebar passes visual test and picking starts
03:50 Picked
05:59 Gutting starts
14:46 Tools and some talk
16:19 Close up thanks and cheers")
![[L140] Fichet 480 Picked and partially gutted](https://i.ytimg.com/vi/nTDbEjI-kgA/mqdefault.jpg "[L140] Fichet 480 Picked and partially gutted
This example of fichet 480 has zero mastered elements and really well done false gates. 10 levers in 4 rows. I had to resort to float picking for much of this. Hope you enjoy and thanks for watching. Cheers
Shout out to @yabende for the awesome work on this 480 to make it easy to gut. Please check out his channel lots of amazing picking and content.
00:00 Lock Operation
00:54 Picking starts
11:55 Picked
13:23 Gutting starts
15:35 Partial gut and lets look at elements
20:45 Close up and more rambling, thanks and cheers")
![[L179] Abus GDS with Trees. Picked and Gutted](https://i.ytimg.com/vi/npS7ozGRl24/mqdefault.jpg "[L179] Abus GDS with Trees. Picked and Gutted
This example of Abus GDS has tree drivers and no counter milling. So similar to the last Abus GDS it was much easier than the ASSA equivalent pinning set up. No counter milling is sad. Thanks for watching and cheers
00:00 Lock Operation
00:19 Picking Starts
01:10 Picked
02:56 Gutting Starts
05:30 Gutted, lets look at internals and ramble again
07:38 Close up Thanks and Cheers
#lockpicking #locksport #lpu")
![[T10] Time laps for June 2nd 2024](https://i.ytimg.com/vi/o6_Veraiokc/mqdefault.jpg "[T10] Time laps for June 2nd 2024
Just an attempt at a sunset time laps. Was not much clouds when I started the hike.. Thanks for watching and cheers")
![[L155] LOB 6 Pin Pick and Gut](https://i.ytimg.com/vi/o981EkhjG2w/mqdefault.jpg "[L155] LOB 6 Pin Pick and Gut
This is a Lob Lobix XT. This example has 6 pins and a mix of spools. I found it harder to overset then all standard version. However security pins did add to the challenge. The keyway is the biggest battle for these locks imho.
00:00 Lock Operation
00:47 Picking starts
10:07 Picked
12:43 Gutting starts
16:28 Gutted and lets look at internals and ramble about stuff
22:30 Close up thanks and cheers
#lockpicking #locksport #lpu")
![[L115] Kaba Star Neo 21 pins Picked and Gutted](https://i.ytimg.com/vi/oUQl1q3JAKI/mqdefault.jpg "[L115] Kaba Star Neo 21 pins Picked and Gutted
Kaba star neo in this example is a 21 pin lock with 5 rows. Pin layout is 3 bottom left, 5 left, 3 top, 6 right, 4 bottom right. All driver pins act tapered. Thanks for watching and cheers
00:00 Lock Operation
00:30 Picking starts
08:55 Picked
10:49 Gutting starts
25:04 Gutted and looking at stuff
30:15 Close up of internals Thanks and cheers
#lockpicking #locksport #lpu")
