Uploaded June 2013 | Updated November 2026, 2 days ago
Here's the .craft file: dropbox.com/s/n4reuewsmf8d4ua/Spider.craft
----------------------
Mods needed
Aviation Lights v3.2: kerbalspaceport.com/aviation-lights-v1-2
B9 Aerospace Pack R3.1: mediafire.com/download/w2tl2cwxx60tr5n/B9_Aerospace_Pack_R3-1c.zip
MechJeb 2.0.8: jenkins.mumech.com/job/MechJeb2%20Release/lastSuccessfulBuild/artifact/jenkins-MechJeb2%20Release-3/MechJeb2-2.0.8.0.zip
Damned Robotics 1.3: svn.mumech.com/KSP/trunk/Releases/DamnedRobotics_1.3.zip
Damned Robotics 0.20.2 Compatibility Patch: github.com/chrisphillips/DRobotics-for-Kerbal-0.20.2/blob/master/DRobotics\(0.20.2\).zip?raw=true
Firespitter Propeller Parts 5.1.1: kerbalspaceport.com/firespitter-propeller-plane-parts
Taverio's Pizza and Aerospace v1.4.1: mediafire.com/download/cuecv7yngvilxvb/TV_Aerospace-1.4.1.7z
Lazor System v28: kerbalspaceport.com/lazor-system
Lazor Guided Weapons: kerbalspaceport.com/lazor-guided-weapons
----------------------
**Start Up**
1. Press space to turn on engines
2. Turn on RCS
3. Turn on SAS
4. Apply about 60% throttle
5. Press 0 to reset and hold motor positions (white light will come on)
6. Press 0 again to release hold (white light goes off)
**Operating Instructions**
* The lights in front indicate the current status of the action groups, which control the legs in different modes. Each side has a red, green, and blue light, and the center has a white light. All action groups are toggle switches, so pressing the key once will enable that group and you need to press it again to disable it. Be sure to disable a motion group before trying to apply a new motion to the same leg group. To go forward, you want to enable forward motion on both sides. Similarly, to go backwards, enable reverse on both sides. Turning involves combinations of forwards and reverse motion. To turn right, enable forward motion on left legs and reverse on right legs.
* Use RCS to maintain balance.
* You will fall over *a lot*. When this happens, kill the throttle (before you flip over), disable all action groups, and enable reset mode. Once legs are reset, disable reset mode and carefully throttle up while manually maintaining pitch.
* Before starting any new maneuver, disable all action groups and turn on reset mode until legs return to their starting position (disable reset mode once complete).
**Action Groups**
*Rotate Command Pod*
Key: **1,2**
Light: **None**
This also rotates the laser and spotlight attached to the bottom. Be careful not to aim weapons at yourself.
*Forward*
Key: **3,4**
Light: **Green**
Each side operates independently, so 3 will toggle forward rotation for left legs and 4 will toggle forward rotation for right legs.
*Reverse*
Key: **5,6**
Light: **Red**
Each side operates independently, so 5 will toggle reverse rotation for left legs and 6 will toggle reverse rotation for right legs.
*Stationary Phasing*
Key: **7,8**
Light: **Blue**
This allows position of the legs to move without applying any net forward or reverse motion. This is useful for raising or lowering the main body for example (many other uses as well). This mode also operates each side independently, so 7 will toggle phase rotation for left legs and 8 will toggle phase rotation for right legs.
*Fire Laser*
Key: **9**
Light: **None**
This does what you think it does.
*Reset*
Key: **0**
Light: **White**
This returns all motors to their initial starting position. Press 0 again to disable reset mode.
--------------------------
Good luck. If you can get a feel for controlling this thing, you may achieve a whopping 2 meters per second top speed.
Here's the .craft file: dropbox.com/s/n4reuewsmf8d4ua/Spider.craft
----------------------
Mods needed
Aviation Lights v3.2: kerbalspaceport.com/aviation-lights-v1-2
B9 Aerospace Pack R3.1: mediafire.com/download/w2tl2cwxx60tr5n/B9_Aerospace_Pack_R3-1c.zip
MechJeb 2.0.8: jenkins.mumech.com/job/MechJeb2%20Release/lastSuccessfulBuild/artifact/jenkins-MechJeb2%20Release-3/MechJeb2-2.0.8.0.zip
Damned Robotics 1.3: svn.mumech.com/KSP/trunk/Releases/DamnedRobotics_1.3.zip
Damned Robotics 0.20.2 Compatibility Patch: github.com/chrisphillips/DRobotics-for-Kerbal-0.20.2/blob/master/DRobotics\(0.20.2\).zip?raw=true
Firespitter Propeller Parts 5.1.1: kerbalspaceport.com/firespitter-propeller-plane-parts
Taverio's Pizza and Aerospace v1.4.1: mediafire.com/download/cuecv7yngvilxvb/TV_Aerospace-1.4.1.7z
Lazor System v28: kerbalspaceport.com/lazor-system
Lazor Guided Weapons: kerbalspaceport.com/lazor-guided-weapons
----------------------
**Start Up**
1. Press space to turn on engines
2. Turn on RCS
3. Turn on SAS
4. Apply about 60% throttle
5. Press 0 to reset and hold motor positions (white light will come on)
6. Press 0 again to release hold (white light goes off)
**Operating Instructions**
* The lights in front indicate the current status of the action groups, which control the legs in different modes. Each side has a red, green, and blue light, and the center has a white light. All action groups are toggle switches, so pressing the key once will enable that group and you need to press it again to disable it. Be sure to disable a motion group before trying to apply a new motion to the same leg group. To go forward, you want to enable forward motion on both sides. Similarly, to go backwards, enable reverse on both sides. Turning involves combinations of forwards and reverse motion. To turn right, enable forward motion on left legs and reverse on right legs.
* Use RCS to maintain balance.
* You will fall over *a lot*. When this happens, kill the throttle (before you flip over), disable all action groups, and enable reset mode. Once legs are reset, disable reset mode and carefully throttle up while manually maintaining pitch.
* Before starting any new maneuver, disable all action groups and turn on reset mode until legs return to their starting position (disable reset mode once complete).
**Action Groups**
*Rotate Command Pod*
Key: **1,2**
Light: **None**
This also rotates the laser and spotlight attached to the bottom. Be careful not to aim weapons at yourself.
*Forward*
Key: **3,4**
Light: **Green**
Each side operates independently, so 3 will toggle forward rotation for left legs and 4 will toggle forward rotation for right legs.
*Reverse*
Key: **5,6**
Light: **Red**
Each side operates independently, so 5 will toggle reverse rotation for left legs and 6 will toggle reverse rotation for right legs.
*Stationary Phasing*
Key: **7,8**
Light: **Blue**
This allows position of the legs to move without applying any net forward or reverse motion. This is useful for raising or lowering the main body for example (many other uses as well). This mode also operates each side independently, so 7 will toggle phase rotation for left legs and 8 will toggle phase rotation for right legs.
*Fire Laser*
Key: **9**
Light: **None**
This does what you think it does.
*Reset*
Key: **0**
Light: **White**
This returns all motors to their initial starting position. Press 0 again to disable reset mode.
--------------------------
Good luck. If you can get a feel for controlling this thing, you may achieve a whopping 2 meters per second top speed.





![[Kerbal Space Program] Routine Testing...
I was testing the ISS Canadarm2 mod when something unexpected happened... [Kerbal Space Program] Routine Testing...](https://i.ytimg.com/vi/yhzrw2NrXRk/mqdefault.jpg)


