Peter Millard
| Kreg Concealed Hinge Jig [video #357] @10MinuteWorkshop | Uploaded 3 hours ago | Updated 3 hours ago
🔇 TAP TO UNMUTE
Kreg Concealed Hinge Jig [video #357] @10MinuteWorkshop
![Kreg Concealed Hinge Jig [video #357]](https://i.ytimg.com/vi/0wQMkWb4DjU/hqdefault.jpg "Kreg Concealed Hinge Jig [video #357]
Kreg Concealed Hinge Jig [video #357]")
![Flat-Pack CNC Loose Tenon Jig [video 482]](https://i.ytimg.com/vi/1dcI7amQisA/hqdefault.jpg "Flat-Pack CNC Loose Tenon Jig [video 482]
In this video it is my pleasure to - finally - introduce the 10 Minute Workshop Loose Tenon Jig, and rather than drone on about it, I put a simple carcass together using nothing but the loose tenon jig and the Trend T18s cordless trim router [gifted] with a 5mm carbide spiral upcut bit. Enjoy.
2023 update; this jig and the Plus were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw
10 years of Domino - https://youtu.be/7oxd2Qnvyw0
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
10 Minute Workshop Loose Tenon Jig (register for availability) - https://bit.ly/10MWLTJ_register
Trend T18s cordless router - https://amzn.to/3IRi7CO (US: nope)
Festool Midi bluetooth extractor - https://amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - https://amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - https://www.rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Other useful gear:-
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
+++++++++")
![DIY MFT with Ikea Curtain Track [video 487]](https://i.ytimg.com/vi/223QALIbnRc/hqdefault.jpg "DIY MFT with Ikea Curtain Track [video 487]
In this video I build my #DIY #MFT -alike using #Ikea curtain-track and Birch plywood, amongst other things. Enjoy!
Thanks so much to Dave Stanton for stopping by for a chat about the Stanton Dog Stops. Check out Dave’s channel here - https://www.youtube.com/c/DavidStanton/videos
Dave’s Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Follow Dave on Instagram - @david_stanton_woodwork
As a Benchdogs affiliate I may earn from qualifying sales; use the offer code ‘10MINUTEWORKSHOP’ at checkout for 5% discount across the board at Benchdogs.co.uk
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of further interest
Extrusion Confusion; a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
3 Easy Wins; New Benchtops - https://youtu.be/XVSp9yDmGYM
LR32 MFT Top - https://youtu.be/C_J-PKrUo1Y
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Sautershop Variobench - https://youtu.be/0Cs092FZW3U
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
182 Festool MFT - https://youtu.be/0V-p5F7SjO4
183 MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
372 MFT top replacement - https://youtu.be/09an8aZrTqs
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Dashboard bracket set - https://dashboardpws.com/products/guide-rail-brackets-set
Ikea Vidga triple track - https://www.ikea.com/gb/en/p/vidga-triple-track-rail-included-ceiling-fittings-white-70492886/
Rutlands T-Track - https://www.rutlands.com/sp+jig-making-t-tracks-t-tracks-t-track-83mm-x-1000mm-pack-of-2-rutlands®+r8002x2
Rutlands t-track accessory set ** NB: NOT M8 ** - https://www.rutlands.com/sp+t-track-hardware-kit-60-piece-19mm-and-83mm+R8018
Ooznest V-slot 8020 - https://ooznest.co.uk/product/v-slot-linear-rail-20x80mm-cut-to-size/
KJN 8040 (10mm slot) - https://www.aluminium-profile.co.uk/40x80l-aluminium-profile-kjn993130
Because of the way the Festool catalogue works I cant link to the items directly, but the parts numbers are listed below, and if you search for those links should pop up for you to order them as spare parts.
497022 Support - this is the front rail support
497023 Support unit - this is the hinge part at the back of the MFT for the rail
472862 Profile - this is the MFT/3 aluminium profile
455242 Profile - this is the Festool 1080 aluminium profile
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Festool CSC SYS50 2 months on... [video 537]](https://i.ytimg.com/vi/28mywqdvXq4/hqdefault.jpg "Festool CSC SYS50 2 months on... [video 537]
I’ve had the #Festool #CSCSYS50 #trimsaw for a coupe of months now and in this shorter vlog-style video I’m passing along my thoughts so far.
TL;DR - it’s great, and has done everything I’ve asked of it. There’s a couple of niggles; the batteries seem to drain at different rates - not bluetooth related - and while I’ve become a convert of all the digital up & down goodness, it emphasises how much the fence could do with a micro-adjust. And the saw a power cord…
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
Basic Builds playlist - https://bit.ly/BasicBuilds
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Handy consumables & gear:-
Festool CSCSYS50 [price hike!!] - https://amzn.to/3X6tnD1
Festool OF1400 - https://amzn.to/3Q7SljY
Festool CTL Midi vac with bluetooth - https://amzn.to/3q9RnZK
Bluetooth button (worth every penny!) - https://amzn.to/3DtSYfZ")
![Cheap & Easy Tracksaw Mitre Jig [Video 513]](https://i.ytimg.com/vi/2SwGl5pzGHY/hqdefault.jpg "Cheap & Easy Tracksaw Mitre Jig [Video 513]
I make a cheap, easy and versatile mitre and crosscut tracksaw trimming jig from scraps and offcuts. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Mondrian-style table - https://youtu.be/bq7amS5MkPI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Ikea Shelves to Basic Boxes with Funky Fronts - https://youtu.be/c0BH6TDSSCI
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Handy consumables & gear:-
Note that prices fluctuate - some have risen since I made my purchases.
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Bencgdogs quad dogs - http://bit.ly/QuadDogs
O3Adhesive CA glue. Use offer code 10MinuteWorkshop at checkout for 10% discount across the board at O3 Adhesives - https://www.o3adhesives.co.uk/?sca_ref=2935180.i6dkKK25CM
Dave Stanton Dog Locks - https://www.etsy.com/uk/listing/1324340248/
Mirock squares (acrylic ones) - not sure these are available any more, this is Vladimirs Etsy; https://www.etsy.com/uk/shop/MirockToolworks
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Gifts for Makers 2021 [video 480]](https://i.ytimg.com/vi/3GXYkXVAGBc/hqdefault.jpg "Gifts for Makers 2021 [video 480]
0:00 Intro
0:38 OKeefes working hands
1:33 Monami Olika pens
2:45 BirdBox 8 in 1
4:58 Kinetic customs ruler
6:57 Aldi Ferrex bandsaw stop flap
7:56 Re-usable vac bag
9:26 MakHack MFT pyramids
10:25 Magnet DIY kit
12:24 Combi squares
13:57 Human Dimension
15:41 Wera advent calendar
16:46 Branding irons
17:28 Benchdogs precision triangle
19:45 Carpenters square
21:02 Clamping guide
21:43 Loose Tenon Jig
22:28 Outro
Hi everybody. In this longer video I go through a few #gift #ideas for #makers, from pocket-money stocking fillers, to a few of things that are a bit more indulgent, there should be something on this list for everyone. Note that prices ae rcorrect at the time of posting, but prices do fluctuate, especially on Amazon!
I make one of these ‘gift idea’ videos every year, so if there’s nothing on this list that tickles your fancy, then maybe take a look at one of the other vids 👍
Gifts to receive 2017 P1 https://youtu.be/Mma0Cysf3hw
Gifts to receive 2017 P2 https://youtu.be/0zgHBdGNkFU
Gifts for Makers 2018 P1 https://youtu.be/4PKLI4DbGb
Gifts for makers 2018 P2 https://youtu.be/Izy_oKLqXwY
Gifts for Makers 2019 - https://youtu.be/8YDUxFPVnkY
Featured in this video:-
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
.
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
.
https://bit.ly/bench-dogs
http://bit.ly/raildogs
++++++++
Previously mentioned:
Made by Idriss - https://www.etsy.com/uk/shop/MadeByIdriss
The Block Scribe - www.theblockscribe.co.uk
U-scribe jig - http://bit.ly/u-scribe
Swankyscribe TriScribe - https://amzn.to/2AhI6kI
Strawbyte waste side jigs - thanks Karl! - http://bit.ly/Strawbyte_jigs
++++++++
Mike at OutpostWorkshopUK for branding irons and stamps - https://www.etsy.com/uk/shop/OutpostWorkshopUK
++++++++
Featured in this video:-
Okeefe’s working hands (~£ 5 or 6) - https://amzn.to/3EfHk7a
Monami Olika fountain pens - cult pens, 10 colours, £3.49 - https://bit.ly/MonamiOlika
BirdBox 8 in 1 - https://amzn.to/3G5BINx
Kinetic customs steel rule (£28, https://bit.ly/150-0-150 )
Whittams Precision Rules (~£6 + £10 P&P https://bit.ly/6-0-6 )
Aldi Ferrex kill switch /stop paddle - https://www.etsy.com/uk/shop/Stuparkercreations
Rhys Hartle Norfolk Bespoke Woodworks vac bags (£15.50, https://ebay.us/xNK9Jk ) and MFT Workstation tops (£??)
James at Makhack - waste side jigs, hose clips and mft nubbins - painters pyramids and bench top protectors - pack of 10 for £10. - https://www.etsy.com/uk/shop/MakHack
First 4 magnets DIY kit; original now sold out, £9.99 alternative here - https://bit.ly/3oDCwmN
Bahco combi square (~£6-7, http://amzn.to/2oumhX4 ) Starrett combi square - £28 (https://amzn.to/3I38ErJ)
Essential book - Human Dimension and Interior Space, a source book of reference standards by Julius Panero and Martin Zelnik, first published in 1979 - https://amzn.to/3p45HhY
Wera advent calendar 2021 (~£42 https://amzn.to/31fDzQU) 2020 https://amzn.to/3xATEwE ~£57
Outpostworkshop - Customisable design templates, ready-made brands, just add your name to them. Start at around £65 - https://bit.ly/3I1hmqs
Benchdogs precision triangle (£174 inc vat https://benchdogs.co.uk/collections/precision-tools/products/precision-triangle-bd450pt?ref=1x_p0bagtnr) and carpenter’s square (£72 inc VAT, https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
10 Minute Workshop clamping guides - www.squareenough.co.uk
10 Minute Workshop Loose tenon jig - 10minutejigs.com")
![Cabinetry Basics Part 1 [video 435]](https://i.ytimg.com/vi/3N_T-YpkBCg/hqdefault.jpg "Cabinetry Basics Part 1 [video 435]
I get a lot of questions about cabinet and carcass construction and in this series I aim to answer them all, starting here with the most asked question of all; on a wall-hung cabinet, should the top and base sit within or above, the sides?
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Plastic packers or shims - http://amzn.to/2vCDN27 (US:http://amzn.to/2vHk4fZ)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Buttonfix - https://amzn.to/2JIXa35 (US: http://bit.ly/buttonfix_US)
Benchdogs Rail Dogs - http://bit.ly/raildogs
Trend MFT router jig - https://amzn.to/34wSp3b
Benchdogs rail square - https://bit.ly/bench-dogs
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![3 Quick Fixes for Wolfcrafts MFT [video 568]](https://i.ytimg.com/vi/3qCU8dzIJ_c/hqdefault.jpg "3 Quick Fixes for Wolfcrafts MFT [video 568]
In this one I’m returning to the Wolfcraft Master 1600 portable bench with three quick fixes that make it significantly more usable and work around some of the odd design decisions. Enjoy!
Register an interest in the 10MW MultiJig, or the 10minuteworkshop MFT Plus jig, at 10minutejigs.com * or directly with this link:-
https://tenminuteworkshop.myflodesk.com/is2eafpl87
*If you were an early adopter of the 10MW Loose Tenon Jig you might find that the .com link redirects to the old site; please use the direct link above to register an interest, and please clear your browser cache - it’s been a couple of years!
Wolfcraft Master work 1600 Mobile Bench - https://amzn.to/494ewNI
Americans, please note that Wolfcraft do not have formal U.S. distribution, any item you see on Amazon.com is there by a third party and does not reflect OEM pricing in the UK/EU**
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
Bargain or Burden; first look at woodcrafts ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - https://bit.ly/BasicBuilds
My Last Build & Install - https://bit.ly/MyLastBuild
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Benchdogs products gifted without obligation:-
Benchdogs Quad hinge system (gifted) - https://benchdogs.co.uk/collections/hinge-system?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH")
![Is a $135 brushless sander anything like the Mirka Deros? [video 428]](https://i.ytimg.com/vi/46Ws3Bgp_bA/hqdefault.jpg "Is a $135 brushless sander anything like the Mirka Deros? [video 428]
In this video I buy a $135 #brushless random orbital sander to see how close you can get to a #Mirka #Deros for the money. Enjoy!
NB a version of this sander is available under the Sealey brand (link below) for not a lot more than I paid, just FYI. 🤷♂️
NB: Abrasives used in this video were supplied for review by Trend. I have not been paid to use these abrasives, or to say nice things about them, and I have no financial interest in the product.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Mirka Deros - https://youtu.be/GxkTdbSXTsc
Which sander, when? - https://youtu.be/uBSOan7D1Ow
Leo at Hand-i-craft - https://www.youtube.com/watch?v=wRudRP7GDAM&t=3s
Leo’s Mirka Deros video - https://www.youtube.com/watch?v=wRudRP7GDAM&t=3s
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Hyvst sander on AliExpress - https://bit.ly/HyvstSander
Sealey branded sander, visually similar - https://amzn.to/35LEY13
Menzer sander, visually similar - https://amzn.to/3t2enY6
SPTA sander (US, visually similar - https://amzn.to/3IaWFbe
Mirka Deros 240v (NB better prices available elsewhere) - https://amzn.to/37DbmCH
Festool ETS 125 - https://amzn.to/2RSAEDD (US: https://amzn.to/2JZy0t5)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Trend abrasives seem to be UK-only, sorry!
Trend Aluminium Oxide abrasive - https://amzn.to/3kICZyM
Trend ZIrconium abrasive - https://amzn.to/2UEIRyA
Trend Mesh abrasive - https://amzn.to/32WjVXZ
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
+++++++++
Other useful gear…
Benchdogs rail square - https://bit.ly/bench-dogs
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![2023 in 10 Minutes [video 557]](https://i.ytimg.com/vi/46zuWSDdsco/hqdefault.jpg "2023 in 10 Minutes [video 557]
A quick roundup of the public-facing content I made this year.
Thanks for watching, and I hope you have a great New Year.
Peter
Stay in touch - sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free factsheets.
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
2023 in a nutshell: 6 million views, 472k hours of watch time, +40k subscribers, 1 major home renovation complete, -2 family members, sadly; the earth turns, night follows day, and it all starts again. Enjoy it while you can.")
