Uploaded January 2020 | Updated November 2026, 3 hours ago
Check our Korg Minilogue review with a deep dive through some of the features, sounds, pros and cons of the Korg Minilogue.
If you’re interested in purchasing Korg Minilogue, you can do so here with a great price: imp.i114863.net/dBk9Q
Starting with an overview and impression of the unit, a quick tour of the main features and a minimal to no talking sound demo of the presets to finish.
Cool resource - 20patch.constructingtowers.com/patch
TIMESTAMPS:
Front Panel & Function Overview - 03:00
Presets and Sound Demos - 26:32
Writeup & Overview
The KORG Minilogue is a 4 Voice, Polyphonic Synthesizer created by Engineer Tatsuya Takahashi over at KORG in Tokyo, Japan. It comes in at around the 400~450 dollars mark in the US and can most certainly be bought 2nd hand online for an even lower price.
The features of the Minilogue is really what makes this Synthesizer stand out from the crowd. With Mono, Poly, Duo, Unison, Chord Memory, Arp and EVEN Sidechain modes ready for you at the click of a button, it can provide a wide variety of sounds and inspiration with the flick of a switch!
For the price point this Analogue Synth is a definite recommended no brainer, but while it is great at what it does, as with all synthesizers, there are a few things to watch out for.
1. POPPY ENVELOPES
A common issue with the Minilogue is the quick and poppy envelopes. With the Attack knob all the way down at the lowest setting, a very noticeable click is present.
While other synth manufacturers compensate for this issue in various ways for you, you will have to manually find the sweet spot in each patch to make sure that you avoid this issue.
2. NOISE
The synth, compared to a lot of other synths, is quite noisy. ESPECIALLY the Delay section. I advise you to use a separate unit or a software reverb in your DAW to get a cleaner and more pure sound.
The pure waves are very nice however and the LFO and mangling features are definitely worth the price tag. Just consider your how it will fit in with your setup as much as you can.
3. BASS
While the Minilogue does and can pack a punch in the low end when used correctly, it’s very well known for the Resonance knob removing a lot of the Bass from patches.
A way to combat this is to use the ‘Mono’ Function and add the Sub Bass to taste underneath your patch which has lost its original bass frequencies due to this quirk.
In Conclusion
The beauty of this Synth lie in its ability to create UNIQUE sounds on the fly and very quickly.
While other analogue synths provide lush and warm sounds which stand on their own, it’s the LFO, Synthesis and ‘Easy-to-use’ Sound Design features more than anything which makes this Synth a Winner and a Mainstay in the Modern Studio.
What do you think of the KORG Minilogue? Let us know in the comments below.
Be sure to check out Consordini.com for more Gear & Instrument Reviews, Music Lessons and More Music and Audio Related Goodness!
For more from Nathan, head over to NathanClearyMusic.co.uk to check out his Audio work and get in touch with him.
Thanks very much for watching, don’t forget to subscribe and hit the bell button for new video releases and updates.
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
#consordini #korg #korgminilogue
Check our Korg Minilogue review with a deep dive through some of the features, sounds, pros and cons of the Korg Minilogue.
If you’re interested in purchasing Korg Minilogue, you can do so here with a great price: imp.i114863.net/dBk9Q
Starting with an overview and impression of the unit, a quick tour of the main features and a minimal to no talking sound demo of the presets to finish.
Cool resource - 20patch.constructingtowers.com/patch
TIMESTAMPS:
Front Panel & Function Overview - 03:00
Presets and Sound Demos - 26:32
Writeup & Overview
The KORG Minilogue is a 4 Voice, Polyphonic Synthesizer created by Engineer Tatsuya Takahashi over at KORG in Tokyo, Japan. It comes in at around the 400~450 dollars mark in the US and can most certainly be bought 2nd hand online for an even lower price.
The features of the Minilogue is really what makes this Synthesizer stand out from the crowd. With Mono, Poly, Duo, Unison, Chord Memory, Arp and EVEN Sidechain modes ready for you at the click of a button, it can provide a wide variety of sounds and inspiration with the flick of a switch!
For the price point this Analogue Synth is a definite recommended no brainer, but while it is great at what it does, as with all synthesizers, there are a few things to watch out for.
1. POPPY ENVELOPES
A common issue with the Minilogue is the quick and poppy envelopes. With the Attack knob all the way down at the lowest setting, a very noticeable click is present.
While other synth manufacturers compensate for this issue in various ways for you, you will have to manually find the sweet spot in each patch to make sure that you avoid this issue.
2. NOISE
The synth, compared to a lot of other synths, is quite noisy. ESPECIALLY the Delay section. I advise you to use a separate unit or a software reverb in your DAW to get a cleaner and more pure sound.
The pure waves are very nice however and the LFO and mangling features are definitely worth the price tag. Just consider your how it will fit in with your setup as much as you can.
3. BASS
While the Minilogue does and can pack a punch in the low end when used correctly, it’s very well known for the Resonance knob removing a lot of the Bass from patches.
A way to combat this is to use the ‘Mono’ Function and add the Sub Bass to taste underneath your patch which has lost its original bass frequencies due to this quirk.
In Conclusion
The beauty of this Synth lie in its ability to create UNIQUE sounds on the fly and very quickly.
While other analogue synths provide lush and warm sounds which stand on their own, it’s the LFO, Synthesis and ‘Easy-to-use’ Sound Design features more than anything which makes this Synth a Winner and a Mainstay in the Modern Studio.
What do you think of the KORG Minilogue? Let us know in the comments below.
Be sure to check out Consordini.com for more Gear & Instrument Reviews, Music Lessons and More Music and Audio Related Goodness!
For more from Nathan, head over to NathanClearyMusic.co.uk to check out his Audio work and get in touch with him.
Thanks very much for watching, don’t forget to subscribe and hit the bell button for new video releases and updates.
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
#consordini #korg #korgminilogue
![CONSCI Cables Review [Professional Opinion]
#consordini #consci #studiogear #audiocables
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ CONSCI Cables Review [Professional Opinion]](https://i.ytimg.com/vi/xfDgQQUSQqE/mqdefault.jpg)
![Presonus Fat Channel Review [Full Collection Included]
In this video, we will take a look at a collection of great virtual signal processors for the StudioLive Series III console or the rack mixer of Fat Channel - the PreSonus Fat Channel Collection.
The Fat Channel Collection includes an extensive amount of plugins, such as compressors like the RC-500, VT-1, Brit Comp, FX-670, Comp 160, Everest C100A, the Classic Compressor and the Tube CB compressor.
But we are just starting, moving to equalizers, the collection includes RC-500 EQ, VT-1 EQ, Alpine EQ-550, Solar 69, Baxandall, Tube and Vintage 3-band EQ. It is an extensive list of Equalizers and Compressors.
The PreSonus Fat Channel bundle comes at around $200 to $500 (at the time of this video, the price was under $200), but many of these plugins are also free, like the RC-500 EQ, RC-500 Compressor, VT1 EQ and VT1 Compressor.
Paid or free, these plugins all offer amazing performance and worth a shot. Taking a look at this PreSonus fat channel colection, we will see why these plugins are so nice and how you can use them.
And on a separate video, we will combine these plugins with the PreSonus Fadeport 16, which we made a video on as well. PreSonus fat channel plugins are a great addition to anyones mixing arsenal.
If you use StudioOne by PreSonus, their DAW, these plugins transition effortlessly. And that is exactly our setup as we have been using PreSonus StudioOne in most of our videos.
The PreSonus fat channel test will mainly be done in a separate video, but we will still go over what you get with the collection.
These EQs are very broadband and will not give you the most flexibility out there, it sounds great.
As it is a collection of equalizers and compressors, there is no need to go over what they do as a tool, but the small intricate differences between them are what makes it a great collection.
The PreSonus fat channel eq batch are solid equalizers that will perform nicely, without being the most flexible, but definitely clean and nice sounding, with both modern and vintage options.
And the PreSonus fat channel compressor batch, follows pretty much the same pattern, a mix of great sounding vintage and modern compressors that do a great job at what they set out to do.
VT1, for example, does quite a bit, especially down in the low end, as you continue to boost the compressors the low end really comes out.
The response is still balanced, even when you reach a point where the low end starts feeling distorted, making for a good compressor to add nice texture and stability.
The sound is clear and nice. Moving on, the TUBE P1B is a great compressor to use for bass and drums but it works wonders for vocals as well, giving them a nice warm feel.
Even with a decent amount of compression it does not sound overcompressed even while bringing out a lot of the vocal.
And the great aspect of the PreSonus software infrastructure is that these plugins work natively with the StudioOne, making it really really easy to use and load.
Also, another example of the collection you get both from StudioOne editions and some mixers PreSonus sell, the Passive EQ is a take on pultec style eq, a rather infamous equalizer.
The GUI replicates the eq quite accurately, bringing the large and clunky physical analogue eq into the digital realm. The main thing is boosting and cutting. You can do so with lows and highs.
And that is the name of the game, boosting and cutting, allowing for an interesting warm sound that many engineers love.
It was the only physical eq that allows you to boost and cut at low frequencies as 60hz, which was the unique aspect of the equalizer making it the only in the market.
How did you like our PreSonus fat channel collection review? Are you interested in seeing how it combines with the PreSonus Fadeport 16? Let us know!
If you have liked the video, make sure to leave a like and subscribe to the channel for more great audio software and hardware reviews and if you have any thoughts, questions or suggestions, feel free to leave them in the comment section below!
#consordini #audioplugin #presonus #fatchannel
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Presonus Fat Channel Review [Full Collection Included]](https://i.ytimg.com/vi/yjxJbmB3LDM/mqdefault.jpg)

![How to String a Cello [Cello Lesson 1]
Thanks for watching How to String a Cello!
Recommended Cello for beginners - https://bit.ly/32amg06
Recommended Cello Bow - https://bit.ly/3l0Eyth
Recommended Cello Rosin - https://bit.ly/2BKkGJg
Totally stringing a cello from scratch is best left to the professionals! Look up a luthier or violin shop in your area to get your instrument set up (and hopefully get your instrument from them too!)
However, putting strings on your cello, putting them back on if they slip, replacing strings/learning to change cello strings, and working with the tuning pegs are all essential cello skills.
With careful attention to the details presented in this video, you will be able to change your cello strings with confidence. Replacing strings can seem scary - especially if you’ve had the unfortunate experience of snapping a string.
But use a tuning reference and carefully guide the string into place - being careful to line up the string on the peg as you tune.
A good question one might ask is how long do cello strings last?” And the answer is that ideally you would replace your strings every 6 months, but if unsnapped they can last for years.
The reason to replace before snapping is that they wear down unevenly, so the overtone series/harmonics are affected by the wear and don’t sound properly.
Learning how to replace a string isn’t too daunting. As we show in the video, replace only one string at a time, so that the bridge stays in its position.
Unscrew the large peg in the pegbox up by the scroll (top) of the cello, and take off the old string. Open your new string, and put a small crease at the top end (without the bell).
Insert this crease into the hole of the peg, and start winding evenly until just before the end of the colored winding. Then hook the bell into the slot by the fine tuner, lower on the tailpiece (bottom black part).
Holding the string with one hand so that it can be lined up with the notches in the bridge and nut, and carefully tighten the peg - pushing in as you turn - until the string sits comfortably.
From here you can tune the instrument. For the upper strings, line up the winding to the right (facing the instrument), and for the lower strings, run the winding to the left. This keeps room for the different strings.
A couple of potential concerns to address: the first is “but I’ve snapped a string before! I’d better not try to touch it.”
You snapped a string because it was a) very old and not cared for or b) you weren’t careful about what pitch you were on as you kept turning. As long as you focus first on finding out what pitch you’re on, and tune careful to the reference, you will be fine.
The second is “but I’ve got this cello in the mail from China, and it’s all in pieces, I have to string it from scratch!” Firstly, I’m very sorry to hear you wasted money on a cheap instrument.
Find some other use for the object, it will not help you learn cello - as you will not be able to get it to play right anyway! Go to a local violin shop and rent a quality instrument properly set up.
One final fun tidbit: the cello used to be strung with gut strings (from guts of animals) and now are mostly steel. However, you can still buy gut strings, and some old recordings were done on them as well.
They are not nearly as precise as steel strings, and are especially difficult to keep in tune, or to play high up on the cello neck. However, they get an interesting tone, and much of the music we play today wouldn’t be possible on them at all!
So when you play Bach, keep in mind you actually have a more modern instrument in your hands than the composer intended.
We’ll be back with more cello instruction videos, so subscribe and stay tuned for more! Videos of Justin’s playing are on the channel Justin Lepard Cello.
Helpful links:
Cello string order: (from thinnest to thickest) A string - D string - G string- C string
Tuning reference: http://www.get-tuned.com/online_cello_tuner.php
Online piano: https://virtualpiano.net/
Justin’s channel: https://www.youtube.com/user/justinlepard
Some strings recommendations:
https://www.amazon.com/DAddario-Kaplan-String-Medium-Tension/dp/B003DOAGB8
https://larsenstrings.com/larsen-strings-cello/
#consordini #cello #cellolesson
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ How to String a Cello [Cello Lesson 1]](https://i.ytimg.com/vi/zvsMJo_t5_M/mqdefault.jpg)
