Uploaded January 2020 | Updated November 2026, 3 hours ago
In this video, we'll take a look at a few guitar pedals from Kmise.
These pedals are quite simple in a half-pedal format, the vintage phase has a speed knob and the tremolo has two knobs for intensity and rate - couldn't be much simpler.
Both of the pedals are true bypass pedals, so you get a truly clean sound through them. These pedals are powered through an adapter, so no batteries. It saves some weight and removes the hassle of dealing with batteries, but you will need a standard 9-volt adapter to power them.
These pedals sound decently good, we tested them with our Rhodes, which worked great with the tremolo and an electric guitar that did just as great. When it comes to the vintage phase, the results are just as clean, providing a very clear and wonderful sound, doing its job with no issues.
And the best part, just like with every Kmise product, the price is the best part of the deal as it's always really really affordable, sometimes only costing you around $20, so make sure to scout around in your regional Amazon to see what Kmise has to offer.
When it comes to the phaser, it is what it says on the box, so there's not much to say about it, besides some of the radio signals it might pick up.
Taking a look at the tremolo though, it has a very sharp sound and sounds more of a sawtooth than a sine wave and might bring out the high-mid, low-top range and make it poke out quite a bit - which means it also changes the tone a bit of the instrument, which might be great if you're looking for tonal changes, but if you want a clean, no tone changes tremolo, this might not be the best, but taking the price into consideration, a wonderful choice nonetheless.
The only drawback would be the vintage phaser experiencing the radio signal interference, which for someone who professionally performs, might not be ideal. But - please keep in mind that the review units we have might be prerelease and might change once they are available to the public.
So any of the issues we had with these pedals might be completely inaccurate. Kmise is known for their affordable music gear, including ukuleles, banjos, guitar parts and accessories, already mentioned guitar pedals and everything is as affordable as it comes.
We have already done a review on Kmise soprano ukulele starter kit which turned out to be a great package for the price and a wonderful beginner ukulele.
And if you go on Amazon and just search up Kmise you'll see a sea of an affordable great product, Ukulele kits from 30 to 60 dollars, amazing quality guitar, ukulele and banjo cases, replacement parts for your music equipment, stands, chairs and much much more for leading competitive prices in the industry.
But don't be deterred by the price as they are not cheap products for a cheap price, every single thing you buy from them is a bargain.
Kmise is carving its way to be one of the more popular budget brands in the music industry and they might not be the goto for professionals, but if you're a beginner or if you want to introduce music into the life of your children, there just might not be a better brand out there.
Kmise is a company based in Shenzen and is a rising star in China when it comes to music gear. And they do it all, designing, manufacturing, trading and is committed to providing the best costumer and buyer experience.
And over the years it has become one of the largest music export companies. So it seems like Kmise is here to stay.
Do you have any other inexpensive pedals you would offer other musicians to use? Are you looking forward to these pedals to release so you can grab them for yourself? Let us know! If you've enjoyed the video, make sure to leave a like and subscribe to our channel for more great budget audio hardware reviews.
If you have thoughts, questions or ideas, make sure to leave them in the comment section below and tune in next time!
#consordini #kmise #effectpedals
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
In this video, we'll take a look at a few guitar pedals from Kmise.
These pedals are quite simple in a half-pedal format, the vintage phase has a speed knob and the tremolo has two knobs for intensity and rate - couldn't be much simpler.
Both of the pedals are true bypass pedals, so you get a truly clean sound through them. These pedals are powered through an adapter, so no batteries. It saves some weight and removes the hassle of dealing with batteries, but you will need a standard 9-volt adapter to power them.
These pedals sound decently good, we tested them with our Rhodes, which worked great with the tremolo and an electric guitar that did just as great. When it comes to the vintage phase, the results are just as clean, providing a very clear and wonderful sound, doing its job with no issues.
And the best part, just like with every Kmise product, the price is the best part of the deal as it's always really really affordable, sometimes only costing you around $20, so make sure to scout around in your regional Amazon to see what Kmise has to offer.
When it comes to the phaser, it is what it says on the box, so there's not much to say about it, besides some of the radio signals it might pick up.
Taking a look at the tremolo though, it has a very sharp sound and sounds more of a sawtooth than a sine wave and might bring out the high-mid, low-top range and make it poke out quite a bit - which means it also changes the tone a bit of the instrument, which might be great if you're looking for tonal changes, but if you want a clean, no tone changes tremolo, this might not be the best, but taking the price into consideration, a wonderful choice nonetheless.
The only drawback would be the vintage phaser experiencing the radio signal interference, which for someone who professionally performs, might not be ideal. But - please keep in mind that the review units we have might be prerelease and might change once they are available to the public.
So any of the issues we had with these pedals might be completely inaccurate. Kmise is known for their affordable music gear, including ukuleles, banjos, guitar parts and accessories, already mentioned guitar pedals and everything is as affordable as it comes.
We have already done a review on Kmise soprano ukulele starter kit which turned out to be a great package for the price and a wonderful beginner ukulele.
And if you go on Amazon and just search up Kmise you'll see a sea of an affordable great product, Ukulele kits from 30 to 60 dollars, amazing quality guitar, ukulele and banjo cases, replacement parts for your music equipment, stands, chairs and much much more for leading competitive prices in the industry.
But don't be deterred by the price as they are not cheap products for a cheap price, every single thing you buy from them is a bargain.
Kmise is carving its way to be one of the more popular budget brands in the music industry and they might not be the goto for professionals, but if you're a beginner or if you want to introduce music into the life of your children, there just might not be a better brand out there.
Kmise is a company based in Shenzen and is a rising star in China when it comes to music gear. And they do it all, designing, manufacturing, trading and is committed to providing the best costumer and buyer experience.
And over the years it has become one of the largest music export companies. So it seems like Kmise is here to stay.
Do you have any other inexpensive pedals you would offer other musicians to use? Are you looking forward to these pedals to release so you can grab them for yourself? Let us know! If you've enjoyed the video, make sure to leave a like and subscribe to our channel for more great budget audio hardware reviews.
If you have thoughts, questions or ideas, make sure to leave them in the comment section below and tune in next time!
#consordini #kmise #effectpedals
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
![Best DAW for Beginners [Software Selection Principles]
Best DAW for Beginners
Our Choice is Studio One Professional
1. 00:01:28 GarageBand
2. 00:03:09 Audacity
3. 00:04:03 Ableton Live (Check price - imp.i114863.net/NLzEV)
4. 00:04:03 FL Studio (Check price - https://imp.i114863.net/Ye1KP)
5. 00:05:15 Studio One Artist (Check price - https://imp.i114863.net/KbJEN)
6. 00:06:14 Cubase (Check price - https://imp.i114863.net/7PyKg)
7. 00:07:11 Logic
8. 00:08:24 Pro Tools (Check price - https://imp.i114863.net/xMyo1)
The Best Beginner DAW Music Production Software - https://consordini.com/best-beginner-daw-music-production-software/
So, you have visions of electronic dance music production dancing in your head, and you need to know how to become an electronic music producer. Electronic music for beginners starts with the best DAW for beginners.
The easiest DAW for beginners is a simple DAW. Meeting your goals and to learn production you must keep things simple.
Once you start to hone your skills you can move up the chain to the more complex systems. EDM music producers all had to start somewhere. A beginner DAW is where they got their start.
How to Get Started Producing EDM
EDM or electronic dance music really starts with that creative energy that you channel using a DAW. There are 5 different stages to becoming one of the great EDM music producers.
A lot of people that are interested in becoming an EDM producer ask the same questions as “how long does it take to become an EDM producer?” or “how long before I start producing music from the time, I get my DAW installed?”
The answers are the same to both questions. Becoming a music producer happens in stages.
There are five stages to becoming an EDM artist.
Stage 1 Is the Immersion Stage
The first step is to choose the best daw for beginners. The Digital Audio Workstation is the most important tool you will ever have for house music production. You want to choose wisely, and then once you have it installed work hard to get to know it.
You will start with the simplest foundation and then add to it. Before you know it, you will know how to make an edm song that fits your vision.
Stage 2 The Experimental Stage
In this stage you are making EDM music and you are learning more and more about how to make digital music. You will find some courage in your experimentation and start to get creative. Experimentation is highly encouraged using beginner DAW software.
Stage 3 Creating your First Song
In this stage you already know ho to make digital music because you have been practicing a lot (hopefully) you have already gotten over many of the hurdles of learning to use your beginners DAW. This is the stage when you first song is produced.
Stage 4 The Stagnant Stage
Every producer goes through a stage where they feel completely overwhelmed by the process and they just do not think they are good enough to make the cut. Making edm music is a journey that is going to have ups and downs. The key here is to not give up and keep moving.
Stage 5 You Graduate to More Advanced Equipment
At some point your DAW will need to be upgraded. The beginner DAW is not enough for your skillset anymore. You have used even the best DAW to the maximum and you are ready to add something new to the mix.
You will buy a DAW that is more advanced, that costs more, and that delivers a wider range of capabilities, and then the stages will begin again. Learn more about beginner DAW and which options are best to get your edm music production career off the ground.
#consordini #daw #bestdaw
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Best DAW for Beginners [Software Selection Principles]](https://i.ytimg.com/vi/ARXax0yBYz0/mqdefault.jpg)


![Audio Technica AT4050 Review [with Demo]
Today we are looking at the Audio Technica AT4050 microphone. With so many different microphones on the market today, it can be a daunting task for any engineer to find a great mic that suits all of their needs. So check our Audio Technica AT4050 Review.
If you’re interested in purchasing Audio Technica AT4050, you can do so here with a great price: https://imp.i114863.net/g06NA
While it is impossible to find only one microphone that fits every situation, the AT4050 can do a lot and do it well. It is not the cheapest microphone in the world.
It sits right around the $700USD price point. In this quick and easy video, we take a look at the features of the Audio Technica AT4050 and perform a series of microphone tests to see how it sounds on a drum kit, acoustic guitar and spoken voice.
If you’re curious about some of the best microphones on the market today, be sure to watch Audio Technica AT4050 review!
What is your opinion of the AT 4050 mic? Do you use mics in the Audio Technica 4000 series? What is your favorite microphone to use? Let us know in the comments below. We’d love to hear your thoughts!
We also have tons of other great tutorials and gear reviews on our channel. Consordini is all about home recording made easy, and with our extensive list of instructional videos and reviews, we want to help you produce like a pro.
Visit our channel page and subscribe to check them out!
Be sure to check out our website and join our ever-growing community of music lovers at https://consordini.com
Or check us out on Facebook - https://www.facebook.com/Consordini/
Or visit us on Instagram - https://www.instagram.com/consordini/
Audio Technica AT4050 microphone is incredibly versatile. It has a very modern, detailed, sheeny, kind of a sound to it. I’m not too fond of the sound, but that’s just a personal preference.
It is a large diaphragm condenser mic that requires phantom power. In terms of features, we have three different polar patterns: omni directional, cardioid, or figure eight.
These options can be selected with a switch right on the front of the mic. On the back side of the microphone there are options for low cut and a 10db pad.
The latter option is good to use when you need to record louder sources. As you can see, the AT4050 has a nice well rounded set of options to help you get the best sound possible.
The hallmark of microphones made by Audio Technica is its modern sound. It has a really present, detailed top end. It is a bit more rolled off in the lower spectrum.
This great for sources like modern vocals (i.e. pop, r&b, hip hop, rap) and modern rock.
Like I said earlier, the Audio Technica AT4050 is not cheap by any means. But if you are creating modern tracks, this microphone is a great option to consider. It is rugged, well built and the AT4050 comes with a shock mount.
I’m Alex Scott, an award-winning musician, engineer and producer based in Denver, Colorado.
I’ve had the honor of working with many Grammy award winning and nominated artists and producers over my decade-long career as a professional in the music industry.
Over the last ten years, I’ve worked on hundreds of projects, from producing records with independent and major-label artists to working on indie video games, commercials, films, TV shows, and just about anything you can imagine.
I’m excited to share everything I’ve learned from my years of professional experience. Be sure to subscribe to our channel for more great content like this, including reviews, tutorials and vlogs about all things music.
Thanks for watching!
#consordini #audiotechnica
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Audio Technica AT4050 Review [with Demo]](https://i.ytimg.com/vi/BPx2tP6gHbk/mqdefault.jpg)



![Audient ASP800 8 Channel ADAT Preamp Review [Extended Version]
This Audient ASP800 review is going to save you tons of time and research. Where you spend your music technology dollars is important, our Audient review of the ASP800 will help you to discover the information you need to make sure you are making the best investment.
If you’re interested in purchasing Audient ASP800, you can do so here with a great price: https://imp.i114863.net/PxVWe
First the Audient ASP800 price is affordable for most which makes it a very attractive offer. On average it is about 20% less expensive than the competitors which is always a welcome break.
Of course, then the question must be asked, “Can it perform?”.
This Audient ASP800 review will give you the answers that you need to make an informed decision. We take you through the paces and deliver the information that you need.
The Audient ASP800 Channel Console.
This is a 1U rack mounting chassis. The chassis weighs about 4.5 KG. The load is lighter on the ASP800 than its sister unit which comes in at about .5 kg heavier. The difference is in the power cord supply.
The ASP800 does not have the high-end fancy power cord which makes it a bit lighter and does not affect the performance as far as we could tell.
There are some other differences as well when you compare the ASP800 to the ASP880. Most noticeably is the rear panel. The rear panel on the 800 has less facilities than the 880. There is no line-level insert points and external processing features that the 880 has to offer but that did not really affect our review.
What we did find were dual ADAT ports. A great level of range for sensitivity, and a switch that gives you the option of expanding for use with any equipment that is equipped with ADAT. In other words, the Audient ASP 800 may not look like much from the outside.
The Performance.
Of course, all the talk about what things look like is not really what you are here for. Let’s talk about preamp performance and how it is achieved. There is a combiXLR input that caters to mics or line signals.
They are padded by 10b balancing and routed right to the mic preamps.
The front panel also allows retro channel input with route right through a high-impedance JFET buffer.
There are 6 basic preamp channels (3-8) that are illuminated plus a rotary gain and a 15db pad. The high-pass filter is fully adjustable. To keep costs down there have been some functions that have been left off the panel including, a high-pass filter, impedance and polarity invert switch.
With some features being left off Audient has been able to add 10db of gain with the 800. Another strong point is that the gain control has become more balanced and easier to get exactly what you want out of it.
You will not notice that annoying distortion that you can sometimes experience at the loud end with the 800 and it responds a lot better with stereo matching than its sister unit does.
Overall.
The price point is perfect, and we did not feel like we were sacrificing function. Yes, you will give up some functions with the savings but ultimately, the 800 compensates in other ways. It is not an 880, but it is a great piece of equipment.
We think you will be pleased with it, especially once you get passed the idea that some functions have been left out.
If you held it up to similar models at this price point from competitors, there is no doubt that it would blow the competition out of the water but if you are comparing it to the 880 that rings up at least 20% higher in costs than of course you are going to be a little disappointed.
At the end of the day our review found that the 800 delivers as promised and came across as a great value. Check out the review and decide for yourself if there is room on the rack for the
ASP800, we think you will find some room for it.
Watch the video and leave your comments in the section below. If you have any questions or want to share your experience you can address that in the comments section as well.
#consordini #audient
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Audient ASP800 8 Channel ADAT Preamp Review [Extended Version]](https://i.ytimg.com/vi/ChxIaBxhJRY/mqdefault.jpg)


