Uploaded June 2017 | Updated September 2026, 1 day ago
Equalizer® KlingOn™ Rearview Mirror Adhesive Kit contains enough material to adhere 200 mirror buttons. Unlike most brands, ours has a brush-on primer instead of spray. The adhesive has a gel-like consistency to keep it from running down the windshield.
To use KlingOn™, clean the glass and mirror bracket thoroughly. Brush the primer on the glass where the bracket will be installed and then brush the primer on the mirror bracket. Let the primer dry then apply two drops of the adhesive to the bracket. When you are ready to install the rearview mirror bracket, be careful to place it exactly where you want it. TIP: Most technicians mark on the outside of the glass to guide correct placement of the bracket since removal can be almost impossible after you have attached it. Be sure and wait 3-4 minutes before installing the rearview mirror back onto the bracket.
Equalizer® KlingOn™ Rearview Mirror Adhesive Kit contains enough material to adhere 200 mirror buttons. Unlike most brands, ours has a brush-on primer instead of spray. The adhesive has a gel-like consistency to keep it from running down the windshield.
To use KlingOn™, clean the glass and mirror bracket thoroughly. Brush the primer on the glass where the bracket will be installed and then brush the primer on the mirror bracket. Let the primer dry then apply two drops of the adhesive to the bracket. When you are ready to install the rearview mirror bracket, be careful to place it exactly where you want it. TIP: Most technicians mark on the outside of the glass to guide correct placement of the bracket since removal can be almost impossible after you have attached it. Be sure and wait 3-4 minutes before installing the rearview mirror back onto the bracket.
