Uploaded November 2020 | Updated November 2026, 3 hours ago
Have you ever been inspired by how a bird captures its prey and wondered how a missile hits its target? In this new introductory course, Missile Guidance Fundamentals, you will build foundations in this technical area. This course provides the ability to mathematically understand, model, simulate, tune, and interpret a fundamental guidance law that is the basis of modern guidance systems, proportional navigation. This video is Section 1 Module 3 - Solution Set of the Collision Course.
The full course content is as follows:
1. Section 1 Module 1 - Course Introduction
2. Section 1 Module 2 - The Collision Course
3. Section 1 Module 3 - Problem Set Solutions of Section 1 Module 2
4. Section 2 Module 1 - Proportional Navigation, A Qualitative Introduction
5. Section 2 Module 2 - Problem Set Solutions of Section 2 Module 1
6. Section 3 Module 1 - The Homing Loop for ProNav Simulation
7. Section 3 Module 2 - Derivation of Kinematics for Simulation with Proportional Navigation
8. Section 3 Module 3 - Engagement Simulation Examples
9. Section 3 Module 4 - Problem Set Solutions of Section 3 Module 3
10. Section 4 Module 1 - Linearization of Engagement Kinematics
11. Section 4 Module 2 - Linear vs Nonlinear Simulation Accuracy
12. Section 4 Module 3 - Problem Set Solutions of Section 4 Module 2
13. Section 4 Module 4 - Zero Effort Miss
14. Section 4 Module 5 - Problem Set Solutions of Section 4 Module 4
15. Section 5 Module 1 - Zero Effort Miss Proportional Navigation in Three Dimensions
Comment below for coverage of other content in the scientific and engineering field of guidance laws.
History:
Updated 11/30 - Corrected errors in True ProNav summary
Errata:
3/2 - Closing velocity should add the two terms in the numerator (- should be +), Thanks to Xin Liang.
10/9/22 - R_T/P = R_T - R_P, V_T/P= V_T-V_P. Right hand side order was flipped at 7:18. Thanks to Salman Aleem.
11/24/22 - At 12:18 and 14:33 V_{Tz}^t on the bottom left should be V_{Tx}^t. Thanks to Francesco Bernardini for catching this error.
6/29/23 - At 11:32 VPx and VPz equations in the top left frame are switched. It is actually VPz on top and VPx on bottom. Thanks to @MeinHerrDreyer for this correction.
11/1/2026 - At 8.34 the head to tail construction of the velocity vectors, shows a collision triangle. In a collision triangle HE = 0, always. This means that L + HE as shown is misleading, because HE must be zero. Note, if HE is not zero, then there is not a collision triangle, which contradicts the depicted geometry. Therefore, the subtracted HE in the formula at 8:50 is incorrect. If you remove it, the lead angle formula is consistent with the code tutorial (separate lesson) and makes geometric sense when HE is added to the angles when initializing the inertial velocities (e.g. VMx = VM*cos(lambda + L + HE_rad) ). Thanks to @michaelseidell1458 for this correction.
Have you ever been inspired by how a bird captures its prey and wondered how a missile hits its target? In this new introductory course, Missile Guidance Fundamentals, you will build foundations in this technical area. This course provides the ability to mathematically understand, model, simulate, tune, and interpret a fundamental guidance law that is the basis of modern guidance systems, proportional navigation. This video is Section 1 Module 3 - Solution Set of the Collision Course.
The full course content is as follows:
1. Section 1 Module 1 - Course Introduction
2. Section 1 Module 2 - The Collision Course
3. Section 1 Module 3 - Problem Set Solutions of Section 1 Module 2
4. Section 2 Module 1 - Proportional Navigation, A Qualitative Introduction
5. Section 2 Module 2 - Problem Set Solutions of Section 2 Module 1
6. Section 3 Module 1 - The Homing Loop for ProNav Simulation
7. Section 3 Module 2 - Derivation of Kinematics for Simulation with Proportional Navigation
8. Section 3 Module 3 - Engagement Simulation Examples
9. Section 3 Module 4 - Problem Set Solutions of Section 3 Module 3
10. Section 4 Module 1 - Linearization of Engagement Kinematics
11. Section 4 Module 2 - Linear vs Nonlinear Simulation Accuracy
12. Section 4 Module 3 - Problem Set Solutions of Section 4 Module 2
13. Section 4 Module 4 - Zero Effort Miss
14. Section 4 Module 5 - Problem Set Solutions of Section 4 Module 4
15. Section 5 Module 1 - Zero Effort Miss Proportional Navigation in Three Dimensions
Comment below for coverage of other content in the scientific and engineering field of guidance laws.
History:
Updated 11/30 - Corrected errors in True ProNav summary
Errata:
3/2 - Closing velocity should add the two terms in the numerator (- should be +), Thanks to Xin Liang.
10/9/22 - R_T/P = R_T - R_P, V_T/P= V_T-V_P. Right hand side order was flipped at 7:18. Thanks to Salman Aleem.
11/24/22 - At 12:18 and 14:33 V_{Tz}^t on the bottom left should be V_{Tx}^t. Thanks to Francesco Bernardini for catching this error.
6/29/23 - At 11:32 VPx and VPz equations in the top left frame are switched. It is actually VPz on top and VPx on bottom. Thanks to @MeinHerrDreyer for this correction.
11/1/2026 - At 8.34 the head to tail construction of the velocity vectors, shows a collision triangle. In a collision triangle HE = 0, always. This means that L + HE as shown is misleading, because HE must be zero. Note, if HE is not zero, then there is not a collision triangle, which contradicts the depicted geometry. Therefore, the subtracted HE in the formula at 8:50 is incorrect. If you remove it, the lead angle formula is consistent with the code tutorial (separate lesson) and makes geometric sense when HE is added to the angles when initializing the inertial velocities (e.g. VMx = VM*cos(lambda + L + HE_rad) ). Thanks to @michaelseidell1458 for this correction.
