Dave Poo 2 | Keyrah V2b USB Pin Header Upgrade (BMC64 with Raspberry PI 3) @DavePoo2 | Uploaded September 2020 | Updated October 2024, 6 hours ago.
This is a simple job to add a 4 pin USB cable header for the Keyrah V2b for my Raspberry Pi 3 installed in a C64 breadbin case (running BMC64).
Keyrah V2 lets you use keyboards and joysticks of classic computers on the USB port of a modern PC, Mac or Raspberry Pi: wiki.icomp.de/wiki/Keyrah_V2
BMC64 is a bare metal fork of VICE's C64 emulator optimized for the Raspberry Pi: accentual.com/bmc64
Timestamps:
0:00 Raspberry Pi 3
1:57 The USB Problem
3:00 Pin header check
3:30 USB Cable
3:50 Soldering Pin header
4:03 Connecting it up
4:40 First test
4:50 Debugging
5:40 Second test
6:18 Final play test
This is a simple job to add a 4 pin USB cable header for the Keyrah V2b for my Raspberry Pi 3 installed in a C64 breadbin case (running BMC64).
Keyrah V2 lets you use keyboards and joysticks of classic computers on the USB port of a modern PC, Mac or Raspberry Pi: wiki.icomp.de/wiki/Keyrah_V2
BMC64 is a bare metal fork of VICE's C64 emulator optimized for the Raspberry Pi: accentual.com/bmc64
Timestamps:
0:00 Raspberry Pi 3
1:57 The USB Problem
3:00 Pin header check
3:30 USB Cable
3:50 Soldering Pin header
4:03 Connecting it up
4:40 First test
4:50 Debugging
5:40 Second test
6:18 Final play test