Uploaded November 2024 | Updated November 2026, 14 hours ago
Onto the finer details of the kayak - adding sleeve for carrying handles and end pours. Unfortunately, I ended up doing this on one of the windiest days of the summer, not recommended, but I had something to tie the end of the boat to, so I didn’t have to worry. The end pours serve 2 purposes for me, holding the stainless steel sleeves in place, which I’ll use to hold the carrying handles later, and more importantly, reinforcing the ends of the boat for added structure and protection in case of impact. The end pours are @totalboat epoxy mixed with silica thickener (though I recommend micro balloons instead, but I used what I had in hand).
Onto the finer details of the kayak - adding sleeve for carrying handles and end pours. Unfortunately, I ended up doing this on one of the windiest days of the summer, not recommended, but I had something to tie the end of the boat to, so I didn’t have to worry. The end pours serve 2 purposes for me, holding the stainless steel sleeves in place, which I’ll use to hold the carrying handles later, and more importantly, reinforcing the ends of the boat for added structure and protection in case of impact. The end pours are @totalboat epoxy mixed with silica thickener (though I recommend micro balloons instead, but I used what I had in hand).










