Uploaded January 2026 | Updated November 2026, 3 days ago
Install a magnetic cooling-fan chaff collector on a Kaleido coffee roaster. This guide demonstrates the retrofit on an M2, including fan access, mounting-plate replacement, collector test fitting and securing the wiring before reassembly.
PARTS & SUPPORT
M2 cooling-fan chaff collector — check model compatibility:
espressooutlet.com/products/kaleido-m2-cooling-fan-chaff-collector
M6/M10 cooling-fan chaff collector:
espressooutlet.com/collections/kaleido-m6-parts/products/kaleido-m10-cooling-fan-chaff-collector
Kaleido M2 parts:
espressooutlet.com/collections/kaleido-m2-parts
Kaleido roasters:
kaleidoroasters.com
STEPS SHOWN
• Unplugging the roaster and removing loose accessories
• Opening the rear cover and disconnecting the fan plugs for working room
• Removing the fan assembly and noting its orientation
• Removing the old guards and fitting the magnetic mounting plate
• Reinstalling the hardware and checking collector fit
• Reconnecting the fans and securing wires away from the hot exhaust area
The tools used on the demonstrated unit include 3mm and 2.5mm Allen keys and a 7mm driver. Fasteners can vary, so check the fit before turning them.
MODEL DIFFERENCES MATTER
The video notes separate collector sizes and a different M10 mounting arrangement that reuses the existing bracket with an added plate. It also discusses retaining clips that differ from the early sample shown. Match the kit to your exact roaster and version before ordering or installing. The current M2 product listing specifies M2 Sealed compatibility; contact support before relying on the video's broader comments about older models.
This collector catches chaff passing through the cooling fans. It does not replace the roaster's normal chaff-bin cleaning or smoke-exhaust arrangements. Follow the installation instructions supplied with your kit.
Subscribe to Espresso Outlet for Kaleido setup, maintenance and home coffee roasting equipment guides.
#KaleidoRoaster #ChaffCollector #EspressoOutlet
Install a magnetic cooling-fan chaff collector on a Kaleido coffee roaster. This guide demonstrates the retrofit on an M2, including fan access, mounting-plate replacement, collector test fitting and securing the wiring before reassembly.
PARTS & SUPPORT
M2 cooling-fan chaff collector — check model compatibility:
espressooutlet.com/products/kaleido-m2-cooling-fan-chaff-collector
M6/M10 cooling-fan chaff collector:
espressooutlet.com/collections/kaleido-m6-parts/products/kaleido-m10-cooling-fan-chaff-collector
Kaleido M2 parts:
espressooutlet.com/collections/kaleido-m2-parts
Kaleido roasters:
kaleidoroasters.com
STEPS SHOWN
• Unplugging the roaster and removing loose accessories
• Opening the rear cover and disconnecting the fan plugs for working room
• Removing the fan assembly and noting its orientation
• Removing the old guards and fitting the magnetic mounting plate
• Reinstalling the hardware and checking collector fit
• Reconnecting the fans and securing wires away from the hot exhaust area
The tools used on the demonstrated unit include 3mm and 2.5mm Allen keys and a 7mm driver. Fasteners can vary, so check the fit before turning them.
MODEL DIFFERENCES MATTER
The video notes separate collector sizes and a different M10 mounting arrangement that reuses the existing bracket with an added plate. It also discusses retaining clips that differ from the early sample shown. Match the kit to your exact roaster and version before ordering or installing. The current M2 product listing specifies M2 Sealed compatibility; contact support before relying on the video's broader comments about older models.
This collector catches chaff passing through the cooling fans. It does not replace the roaster's normal chaff-bin cleaning or smoke-exhaust arrangements. Follow the installation instructions supplied with your kit.
Subscribe to Espresso Outlet for Kaleido setup, maintenance and home coffee roasting equipment guides.
#KaleidoRoaster #ChaffCollector #EspressoOutlet










