Uploaded June 2020 | Updated September 2026, 2 weeks ago
This is a 3d printed Air Assist nozzle + Laser Diode holder including screws + adjustable laser Diode + laser focus adjustment arm, this is a new development after many enquirers . It fits the Chinese 40w laser engraver cutters that have a 26mm dia lens holder. It fits the 12mm laser Diode 3 to 5 volts unit this is included, my machine has this kit fitted and works great. These are a must if you have a laser engraver cutter. The unit is made from ZHIPS plastic very strong. Please make sure that the exhaust pipe inlet on the K40 does not impede on the air nozzle when fitted. If so you will have to cut it back not a big job and it does give you more cutting area if you replace the spring loaded bed. On some of the new ones they can be a longer exhaust pipe inlet. This is designed if you have an adjustable bed not the standard one that comes with the K40.
This is a 3d printed Air Assist nozzle + Laser Diode holder including screws + adjustable laser Diode + laser focus adjustment arm, this is a new development after many enquirers . It fits the Chinese 40w laser engraver cutters that have a 26mm dia lens holder. It fits the 12mm laser Diode 3 to 5 volts unit this is included, my machine has this kit fitted and works great. These are a must if you have a laser engraver cutter. The unit is made from ZHIPS plastic very strong. Please make sure that the exhaust pipe inlet on the K40 does not impede on the air nozzle when fitted. If so you will have to cut it back not a big job and it does give you more cutting area if you replace the spring loaded bed. On some of the new ones they can be a longer exhaust pipe inlet. This is designed if you have an adjustable bed not the standard one that comes with the K40.
