Uploaded April 2019 | Updated September 2026, 2 hours ago
The Bando Basher. A 3" low profile top deck mount. Now with optional upgrade camera pod to house a dual camera setup.
Designed to house the Caddx Turtle or Runcam split mini. (Any 19mm camera) with dual 20x20 stack with an 18mm build height.
In my Armattan productions store there is also cam plates to enable two cameras so you not restrictedto using the split type cameras for fpv
All the arms are removable and identical so a broken arm is easy to replace via 2 screws, without effecting the rest of the hardware or stacks. Both braces are removable and optional. But ive not broken anything yet while fitted
The frame weight with hardware is about 54g. 2mm thick top, bottom, cam pod and braces with 3mm thick arms.
The frame is availble from Armattan Productions
armattanproductions.com/pages/kit_detail/2009
Mamba 20A stack
Mamba 1408 4000kv motors
Frsky xm+
Tx20 v2 vtx
Runcam split mini v1 with predator lens
Foxeer micro monster pro
Gemfan 3052 flash props
Tattu 850 4s
The Bando Basher. A 3" low profile top deck mount. Now with optional upgrade camera pod to house a dual camera setup.
Designed to house the Caddx Turtle or Runcam split mini. (Any 19mm camera) with dual 20x20 stack with an 18mm build height.
In my Armattan productions store there is also cam plates to enable two cameras so you not restrictedto using the split type cameras for fpv
All the arms are removable and identical so a broken arm is easy to replace via 2 screws, without effecting the rest of the hardware or stacks. Both braces are removable and optional. But ive not broken anything yet while fitted
The frame weight with hardware is about 54g. 2mm thick top, bottom, cam pod and braces with 3mm thick arms.
The frame is availble from Armattan Productions
armattanproductions.com/pages/kit_detail/2009
Mamba 20A stack
Mamba 1408 4000kv motors
Frsky xm+
Tx20 v2 vtx
Runcam split mini v1 with predator lens
Foxeer micro monster pro
Gemfan 3052 flash props
Tattu 850 4s
