Uploaded August 2024 | Updated September 2026, 1 hour ago
For additional AtGames Legends 4K table game play videos, please see here: wagnerstechtalk.com/alp4k/#Zen_Studios_Tables
*NOTICE: I am currently employed by AtGames as a contractor and am compensated for my work by the company. While this content was created during my off-work hours, please keep this in mind.
#jurassicpark #zenstudios #atgames #legends4k #pinball #wagnerstechtalk #legends4k
For additional AtGames Legends 4K table game play videos, please see here: wagnerstechtalk.com/alp4k/#Zen_Studios_Tables
*NOTICE: I am currently employed by AtGames as a contractor and am compensated for my work by the company. While this content was created during my off-work hours, please keep this in mind.
#jurassicpark #zenstudios #atgames #legends4k #pinball #wagnerstechtalk #legends4k
![I Bought my first PHYSICAL Pinball Machine! [April 1st]
In this video, we go on a quest to find a physical pinball machine that is within my budget. For a written guide, please see here: https://wagnerstechtalk.com/ppm
Check out MichaelBtheGameGenies review of Godzilla here: https://www.youtube.com/watch?v=wiG-ogU2nso
Music by:
Big Rock - Take the Lead by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/
*As an Amazon Associate I earn from qualifying purchases at no additional cost to you.
SUBSCRIBE for the latest Wagners TechTalk at:
https://www.youtube.com/wagnerstechtalk?sub_confirmation=1
Feel free to ask us a question in the comments below or visit our website, we try to answer most questions that we can.
Email: wagnerstechtalk@gmail.com
Website: http://wagnerstechtalk.com
Or join us on one of the following social media sites...
Facebook: https://www.facebook.com/wagnerstechtalk
Twitter: https://twitter.com/wagnerstechtalk
#raspberrypi5 #recalbox #emulation #wagnerstechtalk #wtt I Bought my first PHYSICAL Pinball Machine! [April 1st]](https://i.ytimg.com/vi/U7VhtWTvnGY/mqdefault.jpg)
![Super League Football [Zen Studios] on the AtGames Legends Pinball 4K
Get this pack: https://www.atgames.us/products/super-league-football-legends-single-pack-l4k-only?sca_ref=4359271.G2fhugu87B
For additional AtGames Legends 4K table game play videos, please see here: https://wagnerstechtalk.com/al-latency/#Zen_Studios
#superleaugefootball #superleaugefootballpinball #zenstudios #atgames #legends4k #pinball #wagnerstechtalk #legends4k Super League Football [Zen Studios] on the AtGames Legends Pinball 4K](https://i.ytimg.com/vi/Uu8ZJyBa0Ns/mqdefault.jpg)
![Raspberry Pi Powered XGO-Lite Robot Dog No Assembly! Full Review & Demo
Discover the ELECFREAKS CM4 XGo Lite Robot Dog Kit powered by the Raspberry Pi Compute Module 4. This fully assembled robotic companion features 15 degrees of freedom, built-in camera, and app-based remote control—perfect for exploring robotics, AI, and programming. In this video, we’ll unbox the kit, demo its features, and even show how to control it using Blockly and Python!
• Product link : https://shop.elecfreaks.com/products/elecfreaks-cm4-xgo-robot-dog-kit-for-raspberry-pi
• Website: https://shop.elecfreaks.com
• Wiki: http://wiki.elecfreaks.com/en/pico/cm4-xgo-robot-kit/product-introduction/xgo-lite-v2-product-instruction
*NOTE - Link below is where I was able to find the XGOBOT application and is not the official link from ELECFREAKS. Ive asked them and expect to receive it in the next couple days.
Android APK Download [APKPure.com] : https://apkpure.com/xgobot/com.luwu.xgobot
Chapters
00:00 - Intro
00:43 - Unboxing
03:06 - First Demo
03:50 - Basic Operations and Ports
04:34 - Android App.
05:42 - Phone WiFi Hotspot Setup
06:28 - Remote Control Mode & Examples
08:34 - Performance Mode
10:03 - Demo Mode
10:46 - Using Pi Desktop
12:07 - Programming using Blockly
14:06 - Outro
*This video is for Educational Purposes only!
*As an Amazon associate, I earn from qualifying purchases.
For the latest updates, please visit: http://wagnerstechtalk.com
If you found this video helpful/informative, please Like / Share the video
SUBSCRIBE for the latest: https://www.youtube.com/wagnerstechtalk?sub_confirmation=1
Feel free to ask a question in the comments below or visit my website. I try to answer most questions that we can: http://wagnerstechtalk.com
Or join us on one of the following social media sites...
Facebook: https://www.facebook.com/wagnerstechtalk
Twitter: https://twitter.com/wagnerstechtalk
#RobotDog #RaspberryPi #ELECFREAKS #XGoLite #wagnerstechtalk #wtt Raspberry Pi Powered XGO-Lite Robot Dog No Assembly! Full Review & Demo](https://i.ytimg.com/vi/VfhNpuKyYyI/mqdefault.jpg)

![Batocera Raspberry Pi 5 Emulation Setup Guide
Batocera makes it easy to play retro games on your Raspberry Pi 5! In this video, well fully set it up on a Pi 5, including: writing the image, configuration and light gun setup. While the installation is relatively easy, this video will save hours of time by consolidating common questions in one. Download Batocera from here: https://batocera.org/download
Wagners TechTalk Amazon Store: https://amzn.to/47xXji2
Chapters
00:00 - Intro
00:59 - Stuff you may need
02:08 - Batocera Download
02:34 - Pi Imager
03:11 - Write Image
04:36 - Batocera First Boot
05:07 - Map Buttons
06:10 - Turn Off Background Music
06:37 - Safe Shutdown
06:56 - Exit a Game
07:13 - Network Setup
08:08 - Update Batocera
08:27 - BIOS & ROMs
11:18 - Update Game Lists
11:40 - Copy over USB
12:53 - Check for Missing BIOS
13:22 - ROMSet incompatible
13:51 - Download New Themes
14:17 - Apply Theme
14:56 - Scrape Artwork
16:16 - Game List View Style
16:42 - Locate Games
17:08 - Play Arcade Game
17:24 - Aspect Ratio (per game)
17:50 - Aspect Ratio (global)
18:28 - Overclocking
19:15 - Light Guns (Sinden)
19:53 - Light Guns (AimTrak)
20:16 - Pi5 on Legends Ultimate Arcade
20:47 - Automatic Game Collections
21:13 - Recoil
22:01 - Remove Decorations
22:34 - Set to Full Screen
22:56 - Outro
This video is for Educational Purposes only!
Products shown:
• CanaKit Raspberry Pi 5 Starter Kit [Amazon Affiliate]: https://amzn.to/3wCFDCe
• Xbox 360 Wired Controller - Clone [Amazon Affiliate]: https://amzn.to/3y81emt
• Official Pi Keyboard & Mouse [Amazon Affiliate]: https://amzn.to/4aZNb0Z
• GRS Sinden Target Pro [Non-Affiliate]: https://thunderstickstudio.com/products/grs-sinden-target-pro
• AtGames Legends Ultimate Arcade [Amazon Affiliate]: https://amzn.to/4dyyB1Y
• Gigastone 128GB Micro SD Card [Amazon Affiliate]: https://amzn.to/3UwIuok
• Beikell SD Card Reader [Amazon Affiliate]: https://amzn.to/3QAAguh
• amgur microSD to SD Adapter [Many microSD cards include this adapter - Amazon Affiliate]: https://amzn.to/3Ux7U5o
• Sinden Lightgun [Non-Affiliate]: https://sindenlightgun.com
• AimTrak Light Gun [Non-Affiliate]: https://www.ultimarc.com/light-guns/aimtrak-light-gun/aimtrak-light-gun-with-recoil
-As an Amazon associate, I earn from qualifying purchases.
A few quick tips:
• Exit a game: SELECT+START
• Insert a credit (Arcade): SELECT
• Start a game: START or A
• Exit Emulation Station: START, move down to QUIT
Related Information and Guides
• CanaKit SetupVideo: https://youtu.be/Wi_S7QkuN3M
• RetroBat (EmulationStation in Windows): https://wagnerstechtalk.com/retrobat
• Batocera Steam Deck Guide: https://wagnerstechtalk.com/sd-batocera
If you found this video helpful/informative, please Like / Share & Subscribe for the latest TechTalk: https://www.youtube.com/wagnerstechtalk?sub_confirmation=1
Feel free to ask questions in the comments below or visit our website, I try to answer most questions that I can.
Website: http://wagnerstechtalk.com
Or join me on one of the following social media sites:
* Facebook: https://www.facebook.com/wagnerstechtalk
* Twitter: https://twitter.com/wagnerstechtalk
#batocera #retrogaming #retrogames #emulation #WTT #WAGNERSTECHTALK Batocera Raspberry Pi 5 Emulation Setup Guide](https://i.ytimg.com/vi/WTiEyFboUJQ/mqdefault.jpg)
![CanaKit Raspberry Pi 5 8GB Starter Kit [Turbine] - Setup Guide
In this video, well setup the CanaKit Raspberry Pi 5 8GB Starter Kit [Turbine Black Edition]! Well setup the kit from unboxing to setting up PiOS Desktop. The Raspberry Pi 5 is the latest model released by the Raspberry Pi Foundation and 2-3 times faster than the Pi 4. More information may be found on the Raspberry Pi 5 Guide: https://wagnerstechtalk.com/rpi5
Helpful Links
• Pi5 CanaKit 4GB/8GB RAM [Amazon] : https://wagnerstechtalk.com/rpi5/#CanaKit_Raspberry_Pi_5_Starter_Kit
• Where to Buy [Non-Affiliate Link]: https://www.canakit.com/canakit-raspberry-pi-5-starter-kit-turbine-black.html
• Accessories: https://wagnerstechtalk.com/rpi5/#accessories
Wagners TechTalk Amazon Store: https://amzn.to/47xXji2
Chapters
00:00 - Intro
00:28 - Unboxing
02:29 - Kit Assembly
03:43 - Fan Installation
04:09 - Heat Sink Installation
04:53 - Pi 5 Install into Case
05:18 - Look at Case
05:41 - Make Connections
06:13 - Pi Desktop Setup
07:26 - Run Stress Test
08:34 - Is it Worth It?
09:44 - Outro
*This video is for Educational Purposes only!
*As an Amazon associate, I earn from qualifying purchases.
* This product was provided by CanaKit for review purposes.
For the latest updates, please visit: http://wagnerstechtalk.com
If you found this video helpful/informative, please Like / Share the video
SUBSCRIBE for the latest: https://www.youtube.com/wagnerstechtalk?sub_confirmation=1
Feel free to ask a question in the comments below or visit my website. I try to answer most questions that we can: http://wagnerstechtalk.com
Or join us on one of the following social media sites...
Facebook: https://www.facebook.com/wagnerstechtalk
Twitter: https://twitter.com/wagnerstechtalk
#canakit #pi5canakit #raspberrypi #raspberrypi5 #pi5 #pios #wagnerstechtalk #wtt CanaKit Raspberry Pi 5 8GB Starter Kit [Turbine] - Setup Guide](https://i.ytimg.com/vi/Wi_S7QkuN3M/mqdefault.jpg)
![This VR Pinball Setup Feels Like a REAL Machine (X-Force Haptics Kit)
In this in-depth video we will upgrade the X-Arcade Arcade2TV XR with the X-Force Haptics Kit for an immersive virtual pinball experience like never before! From unboxing to full assembly, controls, connectivity, and gameplay, Ill guide you through every step. Get ready to elevate your gaming setup and dive into the world of VR/MR pinball. Dont miss out on the excitement - comment your thoughts below, and share this video with fellow gaming enthusiasts!
📖 Guides
• Supplemental Written Tutorial [My Notes via Toucan - new Tutorial Creation Platform]- https://toucancreator.com/learn/wagner-s-techtalk/tutorial/x-arcade-x-force-haptics-kit-installation-tips-enhanced
• X-Force Haptics Kit Guide: https://support.xgaming.com/support/solutions/articles/12000106694-x-force-haptics-kit-installation-quickstart
• X-Arcade2TV Setup Guide [Video] -https://youtu.be/7OA8IxhriWI
🔗 PRODUCT LINKS
• X-Force Haptics Kit (requires the X-Arcade2TV below) - https://shop.xgaming.com/products/x-arcade-arcade2tv-xr?variant=51002657505562&utm_source=affiliate&utm_medium=uppromote&utm_campaign=arcade2tvxr2024
• X-Arcade2TV (pedestal and XR unit) - https://shop.xgaming.com/products/x-arcade-arcade2tv-xr?sca_ref=7098521.cUB3HWW0qQft1T&utm_source=affiliate&utm_medium=uppromote&utm_campaign=arcade2tvxr2024
• Meta Quest 3S (128GB) - https://amzn.to/45cVpC6
• Meta Quest 3S (256GB) - https://amzn.to/4sGp0Of
• Meta Quest 3S (512GB) - https://amzn.to/4aSBoEy
• USB C Extender Adapter (for Quest 2, not needed for Quest 3) - https://amzn.to/4pHB92K
As an Amazon/X-Arcade Associate - I earn from qualifying purchases • Educational purposes only
🎬 Credits
• BlahCade Pinball Podcast - https://www.youtube.com/watch?v=yNo0oQyG8Ms - Segment using the Quest 3 with X-Force Haptics kit and X-Arcade2TV . @blahcadepinball
⏰ CHAPTERS
00:00 - Intro
01:37 - Unboxing
03:30 - Firmware Update
05:48 - Assemble X-Force Haptics (A1-A4)
06:47 - Steps A5-A8
07:16 - Steps B1-B7
08:33 - Steps C1-C10
11:00 - Steps D1-D5
11:49 - Steps E1-10
14:43 - Foam Stickers
15:31 - F1-F10
18:55 - Finalization
20:16 - Control Discussion
21:15 - Gen 2 Wireless Dongle
22:30 - Pinball FX VR Gameplay
26:48 - Quest 3 / MR
27:42 - Reactions
💬 CONNECT WITH ME
• Facebook: https://www.facebook.com/wagnerstechtalk
• X/Twitter: https://twitter.com/wagnerstechtalk
#xarcade #xforcehaptics #zenstudios This VR Pinball Setup Feels Like a REAL Machine (X-Force Haptics Kit)](https://i.ytimg.com/vi/WmK9sOoYEGE/mqdefault.jpg)
![EmuDeck for Windows Emulation Setup Guide
EmuDeck makes it easy to emulate games on your Windows desktop, laptop or handheld PC! EmuDeck is a tool which will download and install various emulators and configure them for us. While the installation is easy, this video will help you get up and running quickly. Download EmuDeck from here: https://www.emudeck.com
Chapters
00:00 - Intro
00:43 - Overview
01:39 - Installation
04:29 - Setup Wizard/Options
09:34 - BIOS and ROMs
10:35 - EmuDeck Wiki
12:19 - Copy BIOS & ROMs
14:40 - Steam Rom Manager
16:37 - Open Steam
17:19 - Emulation Station
17:43 - Chamge ES Theme
18:08 - Scraper
19:35 - EmuDeck Settings
21:52 - Outro
This video is for Educational Purposes only!
A few quick tips:
• Exit a game: SELECT+START
• Insert a credit (Arcade): SELECT
• Start a game: START or A
• Exit Emulation Station: START, move down to QUIT
Related Information and Guides
• EmuDeck Wiki: https://emudeck.github.io/emulators/windows/supported-emulators
• EmuDeck Written Guide (Steam Deck): https://wagnerstechtalk.com/sd-emudeck
• RetroBat (EmulationStation in Windows): https://wagnerstechtalk.com/retrobat
• Batocera Steam Deck Guide: https://wagnerstechtalk.com/sd-batocera
• Steam Deck Windows install to a microSD [Guide]: https://wagnerstechtalk.com/sd-windows
-As an Amazon associate, I earn from qualifying purchases.
If you found this video helpful/informative, please Like / Share & Subscribe for the latest TechTalk: https://www.youtube.com/wagnerstechtalk?sub_confirmation=1
Feel free to ask questions in the comments below or visit our website, I try to answer most questions that I can.
Website: http://wagnerstechtalk.com
Or join me on one of the following social media sites:
* Facebook: https://www.facebook.com/wagnerstechtalk
* Twitter: https://twitter.com/wagnerstechtalk
#emudeck #emudeckwindows #rogally #emulationstation #WTT #WAGNERSTECHTALK EmuDeck for Windows Emulation Setup Guide](https://i.ytimg.com/vi/X-5uTESgccE/mqdefault.jpg)
![Nature’s Fury [NH3 - AtGames Original] on the Legends Pinball 4K
Get this pack: https://www.atgames.us/products/natural-history-pinball-pack-3-pinball-for-l4k-only?sca_ref=4359271.G2fhugu87B
For additional AtGames Legends 4K table game play videos, please see here: https://wagnerstechtalk.com/alp4k/#Zen_Studios_Tables
*NOTICE: I am currently employed by AtGames as a contractor and am compensated for my work by the company. While this content was created during my off-work hours, please keep this in mind.
#naturesfury #naturesfurypinball #atgames #legends4k #pinball #wagnerstechtalk #legends4k Nature’s Fury [NH3 - AtGames Original] on the Legends Pinball 4K](https://i.ytimg.com/vi/X_u8q5q99NI/mqdefault.jpg)

