Uploaded June 2020 | Updated November 2026, 3 hours ago
Welcome Back,
I don’t know about you guys and galls, but sometimes you just loose your mojo. Well that happened to me last week and I could not figure out what I wanted to create, so I opted to potter around the shedquarters and enjoy making without filming, which to be fair I really enjoyed.
Whilst I was pottering, I came across my angle grinder and had a flash of inspiration.
Let's turn some Junk into Jewellery
Digging out a strategically placed old file that I purchased at a car boot a couple of years ago, I got to work cutting and grinding it to a shape that somewhat resembled an arrowhead. Once completed I finessed it with my Dremel Fortiflex, I worked through a number of different attachments, ascertaining the diamond coated bits worked best to engrave a small pattern on it. Files are predominantly made from hardened steel, I hoped to reduce the hardness, by heating it up to red hot and quenching it in water.
Thank you for the support of my channel sponsor Dremel Uk - Link below
dremeleurope.com/gb/en
I am really happy to announce that Chestnut Products are supporting me and helping me up my Finishing game, all tips and tricks that I learn will be passed on to you guys, cause what else am i doing this for.
chestnutproducts.co.uk
These guys are still shipping out orders, so follow the link and treat yourself whilst we are still in lockdown.
So, stay safe and happy making
Take pride in what you do and don't fear failure, aim to be the best you can be and enjoy what you do.
As always, I will share my trials and tribulations documenting my journey. As I believe that it is important to grow and learn from your mistakes.
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.me/mgmakes
Thanks for watching and stay safe.
Yes I know I will not be doing some things correctly, I will be making mistakes, but i will will try to work safe and learn from my mistakes and improve on my techniques as we go along.
I hope you enjoy the video.
Please Follow me on,
Instagram
instagram.com/mgmakes
Facebook
facebook.com/mg.makes.73
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork
Welcome Back,
I don’t know about you guys and galls, but sometimes you just loose your mojo. Well that happened to me last week and I could not figure out what I wanted to create, so I opted to potter around the shedquarters and enjoy making without filming, which to be fair I really enjoyed.
Whilst I was pottering, I came across my angle grinder and had a flash of inspiration.
Let's turn some Junk into Jewellery
Digging out a strategically placed old file that I purchased at a car boot a couple of years ago, I got to work cutting and grinding it to a shape that somewhat resembled an arrowhead. Once completed I finessed it with my Dremel Fortiflex, I worked through a number of different attachments, ascertaining the diamond coated bits worked best to engrave a small pattern on it. Files are predominantly made from hardened steel, I hoped to reduce the hardness, by heating it up to red hot and quenching it in water.
Thank you for the support of my channel sponsor Dremel Uk - Link below
dremeleurope.com/gb/en
I am really happy to announce that Chestnut Products are supporting me and helping me up my Finishing game, all tips and tricks that I learn will be passed on to you guys, cause what else am i doing this for.
chestnutproducts.co.uk
These guys are still shipping out orders, so follow the link and treat yourself whilst we are still in lockdown.
So, stay safe and happy making
Take pride in what you do and don't fear failure, aim to be the best you can be and enjoy what you do.
As always, I will share my trials and tribulations documenting my journey. As I believe that it is important to grow and learn from your mistakes.
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.me/mgmakes
Thanks for watching and stay safe.
Yes I know I will not be doing some things correctly, I will be making mistakes, but i will will try to work safe and learn from my mistakes and improve on my techniques as we go along.
I hope you enjoy the video.
Please Follow me on,
instagram.com/mgmakes
facebook.com/mg.makes.73
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork










