Uploaded November 2019 | Updated September 2026, 3 days ago
Learn how to make an elegant bracelet using square and half round wire with a round focal bead in this beginner-to-intermediate wire wrapping tutorial.
Part 2 here: youtu.be/hvTqG0i7LYk
Materials needed:
10mm round bead with large hole (I used glass cat's eye beads from here: amzn.to/33R92Fl )
16 gauge round dead soft wire, 9" (I used copper from RioGrande.com)
18 gauge twisted square dead soft wire 2 pieces of 4.5", 4 pieces of 3.75", and 2 pieces of 3.5" (can substitute 18 or 16 gauge round)
20 gauge half round wire, dead soft, multiple small lengths. (Can substitute 22 gauge round wire)
Tools Used:
Bead reamer (if your bead's hole is too small) This is the one I have : amzn.to/2NPZCEi though this one looks even better, and is cheaper: amzn.to/2O34fLy
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance/)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
Learn how to make an elegant bracelet using square and half round wire with a round focal bead in this beginner-to-intermediate wire wrapping tutorial.
Part 2 here: youtu.be/hvTqG0i7LYk
Materials needed:
10mm round bead with large hole (I used glass cat's eye beads from here: amzn.to/33R92Fl )
16 gauge round dead soft wire, 9" (I used copper from RioGrande.com)
18 gauge twisted square dead soft wire 2 pieces of 4.5", 4 pieces of 3.75", and 2 pieces of 3.5" (can substitute 18 or 16 gauge round)
20 gauge half round wire, dead soft, multiple small lengths. (Can substitute 22 gauge round wire)
Tools Used:
Bead reamer (if your bead's hole is too small) This is the one I have : amzn.to/2NPZCEi though this one looks even better, and is cheaper: amzn.to/2O34fLy
Chain Nose Pliers (I use Xuron tweezer nose: amzn.to/2qgGwOR And Wubbers chain nose: amzn.to/2Oexzxv )
Round Nose Pliers, (I use Wubbers: amzn.to/2rJlVD6 )
Flush Cutters, (I use Xuron Maxi Shear: amzn.to/2rLWcdf and Micro Shear: amzn.to/2qWbEmG )
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance/)
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) creativecommons.org/licenses/by/4.0
“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.
