FarmCraft101 | JLG Boom Lift Tear Down, Ended In Disaster! @FarmCraft101 | Uploaded March 2023 | Updated October 2024, 2 hours ago.
This is a massive job, especially doing it alone. I spent days researching, reading the service manual, and speaking with everybody I could before starting, so I had some idea of what I was getting into. Several JLG technicians from my awesome audience have contacted me and graciously offered their advice which has been really helpful! Thank you all! I start with disconnecting the control box and hydraulic lines on the platform, and then disconnect the chain tension adjusters and chains which frees up the boom sections. I remove the hydraulic cylinder with is 26' long!? Then I remove the mid and fly booms together. Finally, I remove the chains, and slide the fly boom out of the mid boom. The cylinder pin gave me fits the whole way, and ended up getting the better of me at the end. SMH. Is this why they say: If it ain't broke, don't fix it!? But it was broken. The telescope cylinder needs a rebuild as it was leaking causing it to drift when in use.
Regarding the fire extinguisher, I don't know how old it was (no date on it), but it was definitely old. The gauge said it was in the green which I thought meant it would work. Extinguishers are supposed to be replaced or recharged every 10-12 years, and I suspect this one was older than that. From now on when I buy an extinguisher, I am going to put a date on it!
MERCH!:
farmcraft101.com
Patreon:
patreon.com/FarmCraft101
Amazon Affiliate Storefront:
amazon.com/shop/farmcraft101
Buy me a coffee:
buymeacoffee.com/farmcraft101
Facebook:
facebook.com/FarmCraft101
Evolution power tools affiliate link: (promo code: Farmcraft)
aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16043
Save 5% for yourself and also help out the channel. Thanks!
00:00 Intro
2:34 Disconnect platform
8:51 Prep to remove telescope cylinder
11:50 Start removing pins
17:08 Drilling and cutting pin
19:30 Remove cylinder
22:00 Disconnect chains
23:09 Work on cut pin
25:06 Remove mid and fly booms
32:20 Finish removing chains
36:36 Pull fly boom from mid boom
39:10 Work on cut pin again
47:27 Disaster in the making
56:19 Explanation and outro
This is a massive job, especially doing it alone. I spent days researching, reading the service manual, and speaking with everybody I could before starting, so I had some idea of what I was getting into. Several JLG technicians from my awesome audience have contacted me and graciously offered their advice which has been really helpful! Thank you all! I start with disconnecting the control box and hydraulic lines on the platform, and then disconnect the chain tension adjusters and chains which frees up the boom sections. I remove the hydraulic cylinder with is 26' long!? Then I remove the mid and fly booms together. Finally, I remove the chains, and slide the fly boom out of the mid boom. The cylinder pin gave me fits the whole way, and ended up getting the better of me at the end. SMH. Is this why they say: If it ain't broke, don't fix it!? But it was broken. The telescope cylinder needs a rebuild as it was leaking causing it to drift when in use.
Regarding the fire extinguisher, I don't know how old it was (no date on it), but it was definitely old. The gauge said it was in the green which I thought meant it would work. Extinguishers are supposed to be replaced or recharged every 10-12 years, and I suspect this one was older than that. From now on when I buy an extinguisher, I am going to put a date on it!
MERCH!:
farmcraft101.com
Patreon:
patreon.com/FarmCraft101
Amazon Affiliate Storefront:
amazon.com/shop/farmcraft101
Buy me a coffee:
buymeacoffee.com/farmcraft101
Facebook:
facebook.com/FarmCraft101
Evolution power tools affiliate link: (promo code: Farmcraft)
aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16043
Save 5% for yourself and also help out the channel. Thanks!
00:00 Intro
2:34 Disconnect platform
8:51 Prep to remove telescope cylinder
11:50 Start removing pins
17:08 Drilling and cutting pin
19:30 Remove cylinder
22:00 Disconnect chains
23:09 Work on cut pin
25:06 Remove mid and fly booms
32:20 Finish removing chains
36:36 Pull fly boom from mid boom
39:10 Work on cut pin again
47:27 Disaster in the making
56:19 Explanation and outro