Jib Crane Installation: Cutting out the Slab and Pouring a Reinforced Foundation @VintageMachinery

Keith Rucker - VintageMachinery.org | Jib Crane Installation: Cutting out the Slab and Pouring a Reinforced Foundation @VintageMachinery | Uploaded May 2024 | Updated October 2024, 1 hour ago.
Jib Crane Installation: Cutting out the Slab and Pouring a Reinforced Foundation

Support VintageMachinery.org on Patreon:
patreon.com/vintagemachinery

Make a one time donation to VintageMachinery via PayPal:
paypal.me/VintageMachinery

Please Visit: vintagemachinery.org

Sponsored by:
American Rotary Phase Converters
americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!

Vulcan Steam Locomotive Spring Hangers - Machining the Details after Forging

Monarch 612 Lathe Restoration: Rebuilding the Compound

Case Steam Engine Governor Rebuild - Tear Down and Disassembly

Fabricating a Mobile Cast Iron Surface Plate Workstation

Sometimes You Just Have to Stop and Fix Things.... Repairing My Monarch Lathe

Monarch 612 Lathe Restoration: Adapting a Rack and Pinion Crank to Move the Tailstock

Oliver Pattern Makers Vise Repair - Brazing Broken Cast Iron for Andy Rawls

Vintage Machinery Open House and Work Weekend! July 1-2, 2023, Tifton, GA

18” Straight Edge Prototype: Molding and Pouring a Casting at Windy Hill Foundry

Tally Ho Capstan Project: Installing the Motor Drive and Gear Pinion

Diresta Bandsaws Restoration 22: Pouring Babbitt Bearings on the Upper Wheel Shaft