James Bruton | Jet Powered air engine @jamesbruton | Uploaded 11 months ago | Updated 2 hours ago
AD: Go to: pvcase.com/JamesBruton try PVcase for free!
You can’t suck yourself along with a vacuum cleaner, so don’t bother trying that.
However, I did build a vacuum cleaner powered air engine which I could ride along on. This design was inspired by YouTuber Matthias Wandell, and his original design was made from wood.
I’ve built a few projects recently where I pushed myself along with electric ducted fans. These run on a 6S LiPo battery and draw 80 Amps each, so they are rated at nearly 2KW each. That gives us quite a lot of airflow, and also quite a lot of pressure. Project Air recently built a hovercraft that would carry a person with just four of these EDFs providing air to inflate the skirt.
So this time I’m going to build a two cylinder version of the air engine, with each cylinder being driven by an EDF. We’ll see if this is more efficient that just blowing the air against the atmosphere to propel me.
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: discord.com/invite/fc6MedG7eW
Patreon: patreon.com/xrobots
Merchandise: teespring.com/stores/james-bruton
***************************
Other socials:
***************************
Instagram: instagram.com/xrobotsuk
Twitter: twitter.com/xrobotsuk
Facebook: facebook.com/xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at 3dfuel.com - use code XROBOTS at the cart screen.
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: 3dfuel.com
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
AD: Go to: pvcase.com/JamesBruton try PVcase for free!
You can’t suck yourself along with a vacuum cleaner, so don’t bother trying that.
However, I did build a vacuum cleaner powered air engine which I could ride along on. This design was inspired by YouTuber Matthias Wandell, and his original design was made from wood.
I’ve built a few projects recently where I pushed myself along with electric ducted fans. These run on a 6S LiPo battery and draw 80 Amps each, so they are rated at nearly 2KW each. That gives us quite a lot of airflow, and also quite a lot of pressure. Project Air recently built a hovercraft that would carry a person with just four of these EDFs providing air to inflate the skirt.
So this time I’m going to build a two cylinder version of the air engine, with each cylinder being driven by an EDF. We’ll see if this is more efficient that just blowing the air against the atmosphere to propel me.
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: discord.com/invite/fc6MedG7eW
Patreon: patreon.com/xrobots
Merchandise: teespring.com/stores/james-bruton
***************************
Other socials:
***************************
Instagram: instagram.com/xrobotsuk
Twitter: twitter.com/xrobotsuk
Facebook: facebook.com/xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at 3dfuel.com - use code XROBOTS at the cart screen.
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: 3dfuel.com
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
