Uploaded January 2023 | Updated November 2026, 1 day ago
#jamuary2023 day 10: Sketch & FX
In older videos I have already explored how much fun it is to run the @bastlinstruments drum #kastle through vocoders and FX. This time, I used the @rolandglobal E-4. An important part play the useful helpers and cables from @myvolts that you can't have enough of! ;D Using two of the "pots & pans" volume (and pan and mute) controls, I route the Kastle signal into the mix-in of the E-4 as a "dry" signal and also into the mic-in for all the FX. Also, by using a splitter cable, I can route the sync signal from the Kastle into the E-4 so the FX like delay and stutter run in sync!
#jamuary #candycable #vocoder #effects #bastl #myvolts #synthesizer #etchasketch
#jamuary2023 day 10: Sketch & FX
In older videos I have already explored how much fun it is to run the @bastlinstruments drum #kastle through vocoders and FX. This time, I used the @rolandglobal E-4. An important part play the useful helpers and cables from @myvolts that you can't have enough of! ;D Using two of the "pots & pans" volume (and pan and mute) controls, I route the Kastle signal into the mix-in of the E-4 as a "dry" signal and also into the mic-in for all the FX. Also, by using a splitter cable, I can route the sync signal from the Kastle into the E-4 so the FX like delay and stutter run in sync!
#jamuary #candycable #vocoder #effects #bastl #myvolts #synthesizer #etchasketch










