DIY Montreal | I've been doing it wrong... @DIYMontreal | Uploaded 11 months ago | Updated 4 minutes ago
In a previous video, I explained a very detailed (yet way too complicated) process for making router trays. What can I say, it was my first time! The process worked great, but there were just too many bits, steps, and tools involved. Since then, I’ve made a lot more serving trays using my router templates. And with that, gained a lot more experience and came up with a much simpler process. You don't need a bandsaw and you don't need a router table. Just a handheld router and a jig saw!
►GET THE ROUTER TEMPLATE:
· USA: diymontreal.com/product/round-swirl-3-serving-tray-router-template
· Canada & International: etsy.com/ca/listing/1574024280
All my router templates:
· USA: diymontreal.com/product-category/router-templates
· Canada & International: etsy.com/ca/shop/diymontreal?section_id=44184041
►TOOLS & MATERIALS USED (affiliate links):
· Template tape amzn.to/3rzCkcf
· Bosch router amzn.to/3rP7H2I
· Acrylic sheet for router base amzn.to/4446dPq
· Forstner bits amzn.to/3M5JSe3
· Jigsaw scrolling blades amzn.to/3QpaObj
Router bits:
· Flush trim plunge bit amzn.to/472WRFL
· Bowl & tray bit amzn.to/3DP4Zgk
· 3-flute flush trim bit amzn.to/46ySZMG
· Roundover bit amzn.to/3Odvr8j
Sanding:
· Drill sanding attachments amzn.to/3tEZsHx
· Sanding block amzn.to/3S8lFaZ
· Anti-slip drawer liner amzn.to/45zYGZy
Finish:
· TotalBoat wood honey (Get 5% OFF) totalboat.com/products/wood-honey-food-safe-wood-finish?sca_ref=4404162.7J3EjrDeLX
►Get 5% OFF all TotalBoat products totalboat.com/diymontreal
►ALL MY TOOLS & GEAR
diymontreal.com/my-tools-and-gear
►PLANS & ONLINE STORE
diymontreal.com/shop
►Sign up for my NEWSLETTER: project updates, plans, woodworking book of the month and more!
http://eepurl.com/gVbt21
►Follow me on SOCIAL MEDIA
· Instagram instagram.com/diymontreal
· TikTok tiktok.com/@diymontreal
· Pinterest pinterest.ca/diymontreal
· Facebook facebook.com/DIYMTL
· YouTube youtube.com/c/diymontreal?sub_confirmation=1
►CHAPTERS
0:00 An easier way to make router trays
0:33 Make blank
0:45 Trace the template
1:01 Cut with a jigsaw
1:52 Remove waste with a Forstner bit
3:12 Carve inner pocket with a router
6:25 Flush the outer circle with a router
7:43 Round over edges
8:31 Sanding
9:15 Apply finish
9:37 Get the router templates
In a previous video, I explained a very detailed (yet way too complicated) process for making router trays. What can I say, it was my first time! The process worked great, but there were just too many bits, steps, and tools involved. Since then, I’ve made a lot more serving trays using my router templates. And with that, gained a lot more experience and came up with a much simpler process. You don't need a bandsaw and you don't need a router table. Just a handheld router and a jig saw!
►GET THE ROUTER TEMPLATE:
· USA: diymontreal.com/product/round-swirl-3-serving-tray-router-template
· Canada & International: etsy.com/ca/listing/1574024280
All my router templates:
· USA: diymontreal.com/product-category/router-templates
· Canada & International: etsy.com/ca/shop/diymontreal?section_id=44184041
►TOOLS & MATERIALS USED (affiliate links):
· Template tape amzn.to/3rzCkcf
· Bosch router amzn.to/3rP7H2I
· Acrylic sheet for router base amzn.to/4446dPq
· Forstner bits amzn.to/3M5JSe3
· Jigsaw scrolling blades amzn.to/3QpaObj
Router bits:
· Flush trim plunge bit amzn.to/472WRFL
· Bowl & tray bit amzn.to/3DP4Zgk
· 3-flute flush trim bit amzn.to/46ySZMG
· Roundover bit amzn.to/3Odvr8j
Sanding:
· Drill sanding attachments amzn.to/3tEZsHx
· Sanding block amzn.to/3S8lFaZ
· Anti-slip drawer liner amzn.to/45zYGZy
Finish:
· TotalBoat wood honey (Get 5% OFF) totalboat.com/products/wood-honey-food-safe-wood-finish?sca_ref=4404162.7J3EjrDeLX
►Get 5% OFF all TotalBoat products totalboat.com/diymontreal
►ALL MY TOOLS & GEAR
diymontreal.com/my-tools-and-gear
►PLANS & ONLINE STORE
diymontreal.com/shop
►Sign up for my NEWSLETTER: project updates, plans, woodworking book of the month and more!
http://eepurl.com/gVbt21
►Follow me on SOCIAL MEDIA
· Instagram instagram.com/diymontreal
· TikTok tiktok.com/@diymontreal
· Pinterest pinterest.ca/diymontreal
· Facebook facebook.com/DIYMTL
· YouTube youtube.com/c/diymontreal?sub_confirmation=1
►CHAPTERS
0:00 An easier way to make router trays
0:33 Make blank
0:45 Trace the template
1:01 Cut with a jigsaw
1:52 Remove waste with a Forstner bit
3:12 Carve inner pocket with a router
6:25 Flush the outer circle with a router
7:43 Round over edges
8:31 Sanding
9:15 Apply finish
9:37 Get the router templates
