Jolin012 | Itemless cucco jump setup w/ spin 2 win @MrJolin012 | Uploaded 5 years ago | Updated 12 hours ago
If you have trouble reading the steps I'll put them here as well:
Itemless child gerudo bridge skip setup
with 5 frame perfect inputs
This setup "invented" spin 2 win afaik. The technique repeatedly utilizes that ess turning in increments of 1800 is different from ess turning in 90 and 180 degree directions. It is cruicial to understand that you cannot let link catch up to the joystick direction resulting in non-1800 increments. Exceptions are when 90 degree turns are intended. Frequently tapping target is the safe technique.
POSITION SETUP:
target left wall
Ess turn in increments to the left, 1¾ of a turn and a little bit more. Standing in roughly the shown spot you should be facing the torch on the other side of the bridge. Angle should be 53264
Cross the bridge and go into corner. Sidewalk for a second to ensure in corner.
Backwalk onto post. 3 frame window to release down (gasp frame or 1-2 after). 1st time position is always wrong. repeat - don't ask why.
links left foot should be slightly below the center of the wood post circle. (x,z ) should be (-210.526, 234.079)
90 left
Incrementally ess left for about ¾ turn. End up slightly right of straight. 4 spikes should be visible on gate when targeted. Angle should be 47317
Hold up for 2 frames. Flick should work. (x, z) should be (-214.219, 234.728)
90 left
Incrementally ess left for about 2¾ turn. end up facing the edge of the shown wall. Angle is now 52504.
JUMP INPUTS:
target throughout
hold up 2 frames
hold up/upleft 1 frame (~25-45 joystick units left of straight up)
hold up 1 frame
hold left 3 frames
hold up 6-7 frames
hold right throughout
If you have trouble reading the steps I'll put them here as well:
Itemless child gerudo bridge skip setup
with 5 frame perfect inputs
This setup "invented" spin 2 win afaik. The technique repeatedly utilizes that ess turning in increments of 1800 is different from ess turning in 90 and 180 degree directions. It is cruicial to understand that you cannot let link catch up to the joystick direction resulting in non-1800 increments. Exceptions are when 90 degree turns are intended. Frequently tapping target is the safe technique.
POSITION SETUP:
target left wall
Ess turn in increments to the left, 1¾ of a turn and a little bit more. Standing in roughly the shown spot you should be facing the torch on the other side of the bridge. Angle should be 53264
Cross the bridge and go into corner. Sidewalk for a second to ensure in corner.
Backwalk onto post. 3 frame window to release down (gasp frame or 1-2 after). 1st time position is always wrong. repeat - don't ask why.
links left foot should be slightly below the center of the wood post circle. (x,z ) should be (-210.526, 234.079)
90 left
Incrementally ess left for about ¾ turn. End up slightly right of straight. 4 spikes should be visible on gate when targeted. Angle should be 47317
Hold up for 2 frames. Flick should work. (x, z) should be (-214.219, 234.728)
90 left
Incrementally ess left for about 2¾ turn. end up facing the edge of the shown wall. Angle is now 52504.
JUMP INPUTS:
target throughout
hold up 2 frames
hold up/upleft 1 frame (~25-45 joystick units left of straight up)
hold up 1 frame
hold left 3 frames
hold up 6-7 frames
hold right throughout
