Uploaded November 2020 | Updated November 2026, 2 days ago
00:00 Introduction
00:14 The Repeater
00:31 My WiFi Setup
01:15 Repeater Specs
01:59 Setting it up
03:33 Testing & Results
04:41 Potential Issues
05:23 Final Thoughts
UPDATE: Every 2-3 weeks I am finding I need to unplug the repeater and plug it back in to reset it because it drops signal over time. I also need to do that about every 1-2 months on my Linksys router. Don't be surprised if you have issues and then a restart of the repeater fixes it.
I found a WiFi repeater on Amazon that had really good reviews and I bought it to test it. In this video I talk about my experience using it. There are a lot of factors that play into speed tests and I plan to make a separate video giving tips on testing WiFi repeaters/range extenders.
This is not a perfect range extender. I find that every 2-3 weeks I need to power cycle the device because the signal will drop every once in a while. After turning it off and the back on, it will work good. If you buy this, keep this in mind.
I looked into firmware upgrades for this device and there current are no updates for this repeater.
The repeater is designed bottom heavy (a flaw IMO) and it tends to hang down towards the wall a bit over time.
When you first plug it into an outlet (and after a reset), you can access the repeater with the IP address 192.168.0.254, BUT after it is setup, you can no longer use that IP address to access it. You'll need to use the web address http://re.rockspace.local to access the settings after it is setup.
I did not use the repeater's 2.4Ghz band so I went into the settings and turned off the 2.4Ghz. You will find the option to "hide" any band in the WiFi settings menu.
On single floor homes, WiFi devices perform better when placed at a higher altitude, like 6ft-7ft from the ground instead close to the ground. I plan to extend my wall outlet higher.
If you are able to run an Ethernet cable to this repeater from your router, this will net you the best performance from the repeater. I do not want to go into my attic and drill holes in my ceiling, so I am keep my setup wireless (for now).
The product links below are affiliate links. As an Amazon Associate I earn from qualifying purchases. I may receive a commission if you make a purchase after clicking on one of these links.
PRODUCT LINKS:
Rockspace 1200Mbps WiFi Repeater RSD0608
amzn.to/394bwpe
Mediabridge 100ft Ethernet cable
amzn.to/3lVreqm
Linksys EA7500-RM2 AC1900 - Renewed
amzn.to/2QUr58O
Visit my Amazon storefront to view products that I have reviewed. As an Amazon Influencer I earn a small commission on eligible products.
amazon.com/shop/miggyelite
RELATED VIDEOS:
TP Link N300 WiFi Range Extender Review
youtu.be/xhurqPAeFgo
WiFi Router Tips
youtu.be/JWe7PkC1rog
-Video Not Sponsored-
00:00 Introduction
00:14 The Repeater
00:31 My WiFi Setup
01:15 Repeater Specs
01:59 Setting it up
03:33 Testing & Results
04:41 Potential Issues
05:23 Final Thoughts
UPDATE: Every 2-3 weeks I am finding I need to unplug the repeater and plug it back in to reset it because it drops signal over time. I also need to do that about every 1-2 months on my Linksys router. Don't be surprised if you have issues and then a restart of the repeater fixes it.
I found a WiFi repeater on Amazon that had really good reviews and I bought it to test it. In this video I talk about my experience using it. There are a lot of factors that play into speed tests and I plan to make a separate video giving tips on testing WiFi repeaters/range extenders.
This is not a perfect range extender. I find that every 2-3 weeks I need to power cycle the device because the signal will drop every once in a while. After turning it off and the back on, it will work good. If you buy this, keep this in mind.
I looked into firmware upgrades for this device and there current are no updates for this repeater.
The repeater is designed bottom heavy (a flaw IMO) and it tends to hang down towards the wall a bit over time.
When you first plug it into an outlet (and after a reset), you can access the repeater with the IP address 192.168.0.254, BUT after it is setup, you can no longer use that IP address to access it. You'll need to use the web address http://re.rockspace.local to access the settings after it is setup.
I did not use the repeater's 2.4Ghz band so I went into the settings and turned off the 2.4Ghz. You will find the option to "hide" any band in the WiFi settings menu.
On single floor homes, WiFi devices perform better when placed at a higher altitude, like 6ft-7ft from the ground instead close to the ground. I plan to extend my wall outlet higher.
If you are able to run an Ethernet cable to this repeater from your router, this will net you the best performance from the repeater. I do not want to go into my attic and drill holes in my ceiling, so I am keep my setup wireless (for now).
The product links below are affiliate links. As an Amazon Associate I earn from qualifying purchases. I may receive a commission if you make a purchase after clicking on one of these links.
PRODUCT LINKS:
Rockspace 1200Mbps WiFi Repeater RSD0608
amzn.to/394bwpe
Mediabridge 100ft Ethernet cable
amzn.to/3lVreqm
Linksys EA7500-RM2 AC1900 - Renewed
amzn.to/2QUr58O
Visit my Amazon storefront to view products that I have reviewed. As an Amazon Influencer I earn a small commission on eligible products.
amazon.com/shop/miggyelite
RELATED VIDEOS:
TP Link N300 WiFi Range Extender Review
youtu.be/xhurqPAeFgo
WiFi Router Tips
youtu.be/JWe7PkC1rog
-Video Not Sponsored-










