Uploaded September 2025 | Updated September 2026, 2 weeks ago
The Qidi Q2 is a compact CoreXY 3D printer that comes with an enclosed build chamber and a fully automatic bed leveling system. But the real question is – can it handle engineering-grade materials like ABS-GF, PET-CF, PPS-CF, or even PPA-CF when combined with the Qidi Box filament dryer and multicolor system? In this video, I’ll test the printer with different technical filaments to see how far it can go beyond PLA and ABS.
🔗 Product link (affiliate): tidd.ly/4mqqdoF
💡 Patreon supporters get early access to some of my videos and a summary spreadsheet with all test results for easier comparison, since I always use the same testing method.
👉 Support me here: patreon.com/mytechfun
📌 Mentioned in the video:
– Qidi Plus 4: youtu.be/VP5bDTllQwc?si=8Lh1y_48-QPw95my
– Penguin STL: printables.com/model/40063-penguin-single-multi-material
⏱️ Chapters:
0:00 Introduction
1:08 Specifications
3:08 Tested filaments
4:12 Unboxing
4:32 Closer look
6:32 Unboxing Qidi Box
7:38 Turning ON
8:42 Fast Benchy, PLA
9:20 Noise
9:42 Back to Benchy
10:31 Slicer
10:45 Own g-code Benchy
11:09 Bed level test, PLA
11:59 Long printing, PLA
13:10 Color printing, PLA
15:33 ABS, bed level test
17:07 ABS test objects
17:28 ABS-GF
19:36 PET-CF and support material
22:58 PET-CF only
24:20 PPS-CF
26:08 UltraPA-CF25 (PPA)
27:02 Conclusions
#Qidi #QidiQ2 #3DPrinting #EngineeringFilaments #CarbonFiber #mytechfun
The Qidi Q2 is a compact CoreXY 3D printer that comes with an enclosed build chamber and a fully automatic bed leveling system. But the real question is – can it handle engineering-grade materials like ABS-GF, PET-CF, PPS-CF, or even PPA-CF when combined with the Qidi Box filament dryer and multicolor system? In this video, I’ll test the printer with different technical filaments to see how far it can go beyond PLA and ABS.
🔗 Product link (affiliate): tidd.ly/4mqqdoF
💡 Patreon supporters get early access to some of my videos and a summary spreadsheet with all test results for easier comparison, since I always use the same testing method.
👉 Support me here: patreon.com/mytechfun
📌 Mentioned in the video:
– Qidi Plus 4: youtu.be/VP5bDTllQwc?si=8Lh1y_48-QPw95my
– Penguin STL: printables.com/model/40063-penguin-single-multi-material
⏱️ Chapters:
0:00 Introduction
1:08 Specifications
3:08 Tested filaments
4:12 Unboxing
4:32 Closer look
6:32 Unboxing Qidi Box
7:38 Turning ON
8:42 Fast Benchy, PLA
9:20 Noise
9:42 Back to Benchy
10:31 Slicer
10:45 Own g-code Benchy
11:09 Bed level test, PLA
11:59 Long printing, PLA
13:10 Color printing, PLA
15:33 ABS, bed level test
17:07 ABS test objects
17:28 ABS-GF
19:36 PET-CF and support material
22:58 PET-CF only
24:20 PPS-CF
26:08 UltraPA-CF25 (PPA)
27:02 Conclusions
#Qidi #QidiQ2 #3DPrinting #EngineeringFilaments #CarbonFiber #mytechfun
