Uploaded October 2020 | Updated September 2026, 5 days ago
I see a LOT of different types of sponsors being showcased by other creators. And this was one I didn’t know existed. The Coldest Water Bottle. Apparently, it’s a big thing in the Mukbang community. I don’t watch mukbang videos. So, I never heard of them. So I did what any reasonable person would do. I bought one. Is this actually the coldest water bottle?’
Product Links (some include amazon affiliate links):
Yeti Rambler 18oz: amzn.to/2H8OLEH
HydroFlask 20oz: amzn.to/3lR3hQA
Zojirushi 16oz: amzn.to/3nZhEE7
Linus Tech Tips Water Bottle 21oz: lttstore.com/products/black-gold-ltt-insulated-water-bottle
The Coldest Water Bottle 21oz: thecoldestwater.com/product/the-coldest-water-bottle-21oz/?attribute_pa_color=black
Check out the amazon affiliate links to the gear I use in my videos here:
Sony A7III: amzn.to/2tVF1rj
Vanguard Alta Pro 263AB Tripod: amzn.to/2O7V8Yn
13in Macbook Pro non-touchbar: amzn.to/2F4uz27
Philips Hue Light Strip: amzn.to/2VZq2EV
Godox SL-60W: amzn.to/37LsdT0
Rode VideoMic NTG: amzn.to/2RKHVrL
Time Stamps:
0:00 Introduction
0:41 Physical Features
2:34 Cold Test
5:27 Some potential variables in my testing
6:11 Hot Water Test
7:51 Conclusions
The coldest water bottle comes in plenty of different colors and sizes but I picked up a 21 oz version. The Coldest water bottle is pretty basic shaped. Cause it’s, well. A water bottle. It has a painted stainless steel body with their branding very loudly and in big bold font “THE COLDEST WATER BOTTLE”. The main brand water bottles like a Hydro flask or a YETI do have their labels on the bottles but not as prominent as this one. The handle on top is solid, and doesn’t swing around like the flexible ones on hydro flasks and is more like the solid one on the YETI Rambler. The body of the bottle also has this rubber belt that keeps it from sliding around too much. But I found the rubber belt doesn’t have too much resistance and easily slides if you try to take it off, and will most likely get less stretchy over time. One thing that I noticed about this water bottle, is that the lid is a little bit harder to get into its proper place before tightening it. I know I know. You’re thinking that’s the biggest first world problem ever. You’re absolutely correct. I’m just reviewing the product so I thought I’d provide as much detail a water bottle review could give that might be of interest. And how quickly you can get the cap on seems pretty important to me. They also have a bunch of different accessories for their water bottles similar to what a YETI or Hydroflask has for their bottles.
Okay, great we now know how the product looks and feels, but how well does it do its job that it proudly announces? I decided to compare it to its competition and I’ll try to add links to all the water bottles down below. Here’s how I went about comparing them. I filled them all up with about 75% ice. How did that test go? The first day was super-uneventful. Each water bottle managed to still have ice. It wasn’t until 31 hours in, that I noticed both the Hydroflask and the Yeti were the first to go, and were both 42F. That’s no longer super cold. Just cool. Then, I didn’t really measure the temperature again until the next bottle melted all of its ice. The Linus Tech Tips water bottle, 55 hours in it was 37F and melted all of its ice. Which makes you think “hey middle of the pack isn’t that great of a score”. Well, in this case it kind of is, because only 3 hours later, at 58 hours. The Coldest Water bottle no longer had ice. So that left only the Zojirushi, which lost all of its ice 3 hours later at 61 hours.
So, is the Coldest water bottle the coldest water bottle? No. So, okay, we know the coldest water bottle is near the top of the food chain when it comes to keeping things cold, but how well does it do with hot drinks?
So here’s the test. I filled them all full of hot water I can get from the sink and measured their temps, then I went to bed and checked their temperature in the morning. These results were very similar to what we saw with the cold water test. The Zoshiroshi and Coldest Water bottle stayed the warmest, with the LTT one slightly lagging behind, followed by the hydroflask, and the yeti was the coolest.
So what’s the main takeaway of all this? This is a good water bottle if you’re trying to keep things hot or cold. It doesn’t live up to its name and the lid is a bit finicky but overall the bottle does pretty good. I just personally wouldn’t want to rock this water bottle because I hate loud obnoxious branding, but you know that’s just my own tastes and you can feel free to disagree with that.
I see a LOT of different types of sponsors being showcased by other creators. And this was one I didn’t know existed. The Coldest Water Bottle. Apparently, it’s a big thing in the Mukbang community. I don’t watch mukbang videos. So, I never heard of them. So I did what any reasonable person would do. I bought one. Is this actually the coldest water bottle?’
Product Links (some include amazon affiliate links):
Yeti Rambler 18oz: amzn.to/2H8OLEH
HydroFlask 20oz: amzn.to/3lR3hQA
Zojirushi 16oz: amzn.to/3nZhEE7
Linus Tech Tips Water Bottle 21oz: lttstore.com/products/black-gold-ltt-insulated-water-bottle
The Coldest Water Bottle 21oz: thecoldestwater.com/product/the-coldest-water-bottle-21oz/?attribute_pa_color=black
Check out the amazon affiliate links to the gear I use in my videos here:
Sony A7III: amzn.to/2tVF1rj
Vanguard Alta Pro 263AB Tripod: amzn.to/2O7V8Yn
13in Macbook Pro non-touchbar: amzn.to/2F4uz27
Philips Hue Light Strip: amzn.to/2VZq2EV
Godox SL-60W: amzn.to/37LsdT0
Rode VideoMic NTG: amzn.to/2RKHVrL
Time Stamps:
0:00 Introduction
0:41 Physical Features
2:34 Cold Test
5:27 Some potential variables in my testing
6:11 Hot Water Test
7:51 Conclusions
The coldest water bottle comes in plenty of different colors and sizes but I picked up a 21 oz version. The Coldest water bottle is pretty basic shaped. Cause it’s, well. A water bottle. It has a painted stainless steel body with their branding very loudly and in big bold font “THE COLDEST WATER BOTTLE”. The main brand water bottles like a Hydro flask or a YETI do have their labels on the bottles but not as prominent as this one. The handle on top is solid, and doesn’t swing around like the flexible ones on hydro flasks and is more like the solid one on the YETI Rambler. The body of the bottle also has this rubber belt that keeps it from sliding around too much. But I found the rubber belt doesn’t have too much resistance and easily slides if you try to take it off, and will most likely get less stretchy over time. One thing that I noticed about this water bottle, is that the lid is a little bit harder to get into its proper place before tightening it. I know I know. You’re thinking that’s the biggest first world problem ever. You’re absolutely correct. I’m just reviewing the product so I thought I’d provide as much detail a water bottle review could give that might be of interest. And how quickly you can get the cap on seems pretty important to me. They also have a bunch of different accessories for their water bottles similar to what a YETI or Hydroflask has for their bottles.
Okay, great we now know how the product looks and feels, but how well does it do its job that it proudly announces? I decided to compare it to its competition and I’ll try to add links to all the water bottles down below. Here’s how I went about comparing them. I filled them all up with about 75% ice. How did that test go? The first day was super-uneventful. Each water bottle managed to still have ice. It wasn’t until 31 hours in, that I noticed both the Hydroflask and the Yeti were the first to go, and were both 42F. That’s no longer super cold. Just cool. Then, I didn’t really measure the temperature again until the next bottle melted all of its ice. The Linus Tech Tips water bottle, 55 hours in it was 37F and melted all of its ice. Which makes you think “hey middle of the pack isn’t that great of a score”. Well, in this case it kind of is, because only 3 hours later, at 58 hours. The Coldest Water bottle no longer had ice. So that left only the Zojirushi, which lost all of its ice 3 hours later at 61 hours.
So, is the Coldest water bottle the coldest water bottle? No. So, okay, we know the coldest water bottle is near the top of the food chain when it comes to keeping things cold, but how well does it do with hot drinks?
So here’s the test. I filled them all full of hot water I can get from the sink and measured their temps, then I went to bed and checked their temperature in the morning. These results were very similar to what we saw with the cold water test. The Zoshiroshi and Coldest Water bottle stayed the warmest, with the LTT one slightly lagging behind, followed by the hydroflask, and the yeti was the coolest.
So what’s the main takeaway of all this? This is a good water bottle if you’re trying to keep things hot or cold. It doesn’t live up to its name and the lid is a bit finicky but overall the bottle does pretty good. I just personally wouldn’t want to rock this water bottle because I hate loud obnoxious branding, but you know that’s just my own tastes and you can feel free to disagree with that.









So a few months ago, I was lucky enough to grab an RTX 3070 graphics card. Which is really difficult to get a hold of right now. and at retail price at that. So, that kind of made me really want to do a whole new computer build instead of upgrade my old one. Something I havent done in like 4 or 5 years. So, I sent out a quick poll on youtube and asked you, the viewer, what I should do. A video, a livestream, or return the parts so someone else could buy it. And well, this is what you wanted. If youre here to watch me fail to build a pc, youve come to the right place. Lets get started, with a little build.
Parts In the Build (Amazon Affiliate Links):
Nvidia RTX 3070 FE: https://www.amazon.com/gp/search/ref=as_li_qf_sp_sr_il_tl?ie=UTF8&tag=jton7-20&keywords=rtx 3070&index=aps&camp=1789&creative=9325&linkCode=xm2&linkId=7b997ff4d39f9fd8c3d4d81672f839b6
AMD Ryzen 5600X: https://amzn.to/31qMlrK
Corsair Vengeance RGB Pro (16GB): https://amzn.to/3lWLXL2
Lian Li O11D Mini: https://www.microcenter.com/product/629071/lian-li-o11d-mini tempered-glass-atx-mini-tower-computer-case white
Corsair SF600: https://amzn.to/3rxo1zq
CableMod Extension Cables (White): https://amzn.to/3tPMz8e
Lian Li Uni SL120 Fans: https://amzn.to/3fjH8KG
Corsair Elite Capellix AIO Cooler: https://amzn.to/3csLJsi
Samsung 970 Evo SSD: https://amzn.to/3svfuhq
Gigabyte B550 Vision: https://amzn.to/3rl02mQ
Amazon Affiliate Links to Gear I use:
Sony A7S III: https://amzn.to/3jD0fxC
Vanguard Alta Pro 263AB Tripod: https://amzn.to/2O7V8Yn
M1 Macbook Air: https://amzn.to/3rV5Zru
Philips Hue Light Strip: https://amzn.to/2VZq2EV
Godox SL-60W: https://amzn.to/37LsdT0
Rode VideoMic NTG: https://amzn.to/2RKHVrL
Shure SM7B: https://amzn.to/30Dxji7
Logitech MX Master 3: https://amzn.to/30G1GV2
Logitech MX keys: https://amzn.to/3bHytQ8
Timestamps:
0:00 Intro
0:29 Sponsor: Skillshare
1:18 Parts List
2:10 Building Starts
5:45 Where Everything Starts to go Downhill
8:10 Cinematic Shots of the Finished Build
8:35 Final Thoughts and Conclusions
Alright. Its been a month now and those out of stock Lian Li fans that I convinced myself I dont need and wont buy, I ended up buying anyway, and they finally made it to me all the way from China. So yeah, I went way more over budget then I intended, because I didnt realize this case didnt come with fans. Thats my own negligence. Anyway, lets see how the final product looks.
I think the overall build turned out really cool with the white theme. Honestly, super clean looking except for my terrible cable management skills. While I did stick a bunch of RGB fans in the system, I plan to keep it at a stagnant white. Because, I like the look and I think people are over the rainbow skittle puke all over their systems by this point. But, before we end this video, I just wanted to summarize this whole experience. Im not a PC building novice, but by no means am I a pro. Id like to think Im the average pc builder. There were times in previous pc builds where I put things in the wrong spots they arent supposed to be, like RAM sticks in un-optimal positions. But thats the thing right? You dont get better without trial and error and as you saw in this video, I made errors. Ive never used an AIO liquid cooler like this one before, Ive always used the default stock coolers, and it took me a solid hour to figure the AIO and get it installed, which is a long time, but hey, I got it done. Somehow. And so overall it took a good 4 hours to build this pc and get it up and running with windows. But if you really know what youre doing, you can get it up and running in 2 hours. I know a ton of non-techy people think building a pc is difficult, but it really isnt, it just takes some time and patience. If on a scale of one to ten. With one being building with legos, a five being ikea furniture, and a 10 being building a rocket ship. I think building a PC is a solid 6/10 on the difficulty scale. You just need to know what youre doing beforehand.
Anyway, I hope you enjoyed watching me fail to install a cooler. How do you think the build ended up? Is there anything you would personally change? Do you like the white theme? Why or why not. Are you planning to build your own PC? Leave all that in the comment section below. If you enjoyed this video give it a thumbs up and well dont forget to subscribe. Ill see you next time. I Fail Building My First PC in Years](https://i.ytimg.com/vi/Hc-my_uT78Y/mqdefault.jpg)

