Uploaded November 2024 | Updated November 2026, 3 hours ago
weldmongerstore.com
I repaired a high carbon steel pin for a piece of gym equipment as a favor and so for this video, I thought I would mock up the repair using a piece of drill rod to show how I went about the weld repair.
Normally, I turn down jobs like this but since it was such a quick job, I welded it.
It is still holding up a year later and I think a lot of it is due to using 312 stainless filler metal and the extra fillet I made with that second pass.
See the full blog post here weldmongerstore.com/blogs/weldingtipsandtricks/is-super-missileweld-just-312-stainless
weldmongerstore.com
I repaired a high carbon steel pin for a piece of gym equipment as a favor and so for this video, I thought I would mock up the repair using a piece of drill rod to show how I went about the weld repair.
Normally, I turn down jobs like this but since it was such a quick job, I welded it.
It is still holding up a year later and I think a lot of it is due to using 312 stainless filler metal and the extra fillet I made with that second pass.
See the full blog post here weldmongerstore.com/blogs/weldingtipsandtricks/is-super-missileweld-just-312-stainless










