Uploaded December 2024 | Updated September 2026, 2 hours ago

---

Today I am going to show you how to change the screen on the Apple iPad Pro 11 inch. This one is the 1st generation, but the screen is shared with the 2nd gen. While the 3rd and 4th gen screens are not the same as the 1st and 2nd gen, the repair process is practically the same thing.

Required tools-
PH000 Driver
Metal Razor Blade
Plastic Pick
Playing Card
Maybe Adhesive
Heat
Patience.

Check out the RWR Discord! - discord.gg/buQdzYkfrS
Support the channel via Patreon! - patreon.com/RealWorldReview

Toolkit that I recommend and reviewed (affiliate link) - amzn.to/2EqCvvv
Toolkit that is closest to the one I use for all my repairs (affiliate link) - amzn.to/2H4duIr

***Part can be found here (affiliate link) ***
iPad Pro 11 1st/2nd Gen- amzn.to/4gUB1Jf
iPad Pro 11 3rd/4th Gen - amzn.to/4gWDt2a
(They're NOT the same part)

The glue that I recommend using (I use the T7000 at 50ml, but B7000/E6000 work as well) (affiliate link) - amzn.to/3ZmxvSk
Double sided adhesive I recommend (affiliate link) - amzn.to/2U2eQqv
Clamps I recommend with the glue (affiliate link) - amzn.to/2T8opHn
Dual Temperature Heating "Thing" (Heat “Gum”) (affiliate link) - amzn.to/3hzTUUs
The best type of razor blades (buy 100+ cause they’re low cost and fragile[don’t pry with these!!!]) (affiliate link) - amzn.to/2YE4W17
Playing Cards for easy adhesive cutting (affiliate link) - amzn.to/2JTBJf6

What else should I teardown or fix? Want more iPad videos? Let me know on here or on Twitter twitter.com/mattofrwr.