Uploaded October 2025 | Updated November 2026, 21 hours ago
Dive into Lesson 5 of our hands-on IoT Programming with MaTouch ESP32S3 1.28" Touch series! 🚀
In this lesson we show how to connect your MaTouch 1.28” ToolSet_Controller (ESP32-S3) to the Internet and exchange data using two of the most common IoT protocols: HTTP and MQTT.
What you’ll learn:
How to perform HTTP GET/POST requests from MaTouch (Arduino / PlatformIO).
How to publish/subscribe with MQTT and test with MQTTX.
How to send sensor data and receive remote commands (practical demo).
Integrating network calls into a touchscreen UI and handling reconnection logic.
Code walkthroughs, live demos, tips for IoT reliability and low-power considerations.
Who is this for:
Makers, embedded developers, students, hobbyists — anyone building edge devices with ESP32-S3, MaTouch, SD/RTC, or building MQTT/HTTP IoT workflows.
Call to action:
If this helped you — Like, Subscribe, and hit the Bell 🔔 to follow the full IoT course (display basics → touch/encoder → SD/RTC → HTTP/MQTT → full IoT apps).
Questions or feature requests? Drop them in the comments — we reply!
Product link: makerfabs.com/matouch-1-28-toolset-controller.html
Dive into Lesson 5 of our hands-on IoT Programming with MaTouch ESP32S3 1.28" Touch series! 🚀
In this lesson we show how to connect your MaTouch 1.28” ToolSet_Controller (ESP32-S3) to the Internet and exchange data using two of the most common IoT protocols: HTTP and MQTT.
What you’ll learn:
How to perform HTTP GET/POST requests from MaTouch (Arduino / PlatformIO).
How to publish/subscribe with MQTT and test with MQTTX.
How to send sensor data and receive remote commands (practical demo).
Integrating network calls into a touchscreen UI and handling reconnection logic.
Code walkthroughs, live demos, tips for IoT reliability and low-power considerations.
Who is this for:
Makers, embedded developers, students, hobbyists — anyone building edge devices with ESP32-S3, MaTouch, SD/RTC, or building MQTT/HTTP IoT workflows.
Call to action:
If this helped you — Like, Subscribe, and hit the Bell 🔔 to follow the full IoT course (display basics → touch/encoder → SD/RTC → HTTP/MQTT → full IoT apps).
Questions or feature requests? Drop them in the comments — we reply!
Product link: makerfabs.com/matouch-1-28-toolset-controller.html










