IoT Programming with MaTouch ESP32S3 1.28 – Lesson 3: SD Card & RTC Tutorial for Makers @Makerfabs
IoT Programming with MaTouch ESP32S3 1.28 – Lesson 3: SD Card & RTC Tutorial for Makers  @Makerfabs
Uploaded October 2025 | Updated November 2026, 3 hours ago
Dive into Lesson 3 of our hands-on IoT Programming with MaTouch ESP32S3 1.28" Touch series! 🚀

In this session, we explore the SD card and RTC (Real-Time Clock) modules of the MaTouch 1.28” ToolSet_Controller (ESP32-S3). You’ll learn:
How to read and write files on the SD card with Arduino/PlatformIO
How to display images stored on the SD card on the 1.28" touchscreen
How to use the RTC module to keep accurate real-time for IoT projects
Step-by-step code walkthroughs and live demos

Whether you’re a maker, embedded developer, student, or hobbyist, this tutorial shows practical ways to integrate SD card storage and real-time clock features into your IoT prototypes.

📘 This lesson is part of the series based on the book: “IoT Programming with MaTouch ESP32S3 1.28 Touch”. We’ll guide you from display basics, touch & encoder, to SD card & RTC, and finally to full IoT applications with HTTP, MQTT, and more.

Useful for: ESP32-S3, MaTouch, Arduino, PlatformIO, IoT prototyping, SD card, RTC, touchscreen ESP32, MQTT, HTTP IoT, embedded C/C++

Product link: makerfabs.com/matouch-1-28-toolset-controller.html

🔔 Subscribe and hit the bell to follow the full IoT course!
IoT Programming with MaTouch ESP32S3 1.28 – Lesson 3: SD Card & RTC Tutorial for MakersMaTouch with a rotary encoder🚀 Meet Our New Lauchced Smart Voice Control for Home Assistant!What if the MimiClaw were combined with an ESP32S2 board?MaTouch ESP32-S3 vs ESP32-P4 | 7″ Touch Display Detailed Demo & Comparison9 Basic Circuits Every Hardware Engineer MUST Know ⚡️MaTouch ESP32 S3 Rotary IPS Display 1 . 28 GC9A01#DIY a #Mari  clock with Matouch Decorative #rgb  #led  Matrix #display #diy #esp32Meet the NEW AgroSense LoRaWAN® Door/Window Sensor!ESP32 S3 AI Display with Camera  : Real Time Vision on MaTouch TFT DisplayRun LVGL on MaTouch with SquareLine IDEIOT Programming with MaTouch ESP32S3 1.28 Touch  Lesson 2: Touch & Encoder
Makerfabs |

IoT Programming with MaTouch ESP32S3 1.28" – Lesson 3: SD Card & RTC Tutorial for Makers

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER