Uploaded August 2026 | Updated November 2026, 6 hours ago
This is a 3D representation of a simulation similar to the video youtu.be/RWp664Qm5rs , comparing the effect of an invisibility cloak when it hides an object and when it does not, where the z-coordinate and the color both represent the wave height.
The purpose of the cloak is to hide an object in its center, by reconstructing waves that interfere with the object and the cloak in such a way that they resemble the original incoming wave, in this case a planar wave coming from the left. If the reconstruction were perfect, an observer located further to the right would not be able to know the cloaked object's existence. There is almost no difference between the halves with and without a cloaked object. This implies that while the observer will notice some disturbance, he will not be able to know what it is caused by.
The cloak consists in 200 circles placed on 5 concentric layers of 40 circles each. It is the first, non-optimized design proposed in the article sciencedirect.com/science/article/abs/pii/S0165212514001759
Many simulations of the wave equation in a domain on this channel used Dirichlet boundary conditions, meaning that the wave height is zero at the boundary of the domain. This is a good model for an elastic membrane, for instance for a drum, or for sound waves. For water waves, however, it would be more realistic to use Neumann boundary conditions, meaning the the wave height has a horizontal tangent at the boundary.
Dirichlet boundary conditions are very easy to implement in a finite difference scheme: it suffices to keep the wave height equal to zero outside the domain, and use this zero value when computing the discrete Laplacian. For Neumann boundary conditions, however, one has to implement the condition that the normal derivative of the wave height is zero at the boundary. This is implemented here by adding "ghost" points next to the grid points in the domain, and computing their value in such a way that the normal derivative is approximately zero. These points are then used to compute the discrete Laplacian at points in the domain next to the boundary.
The color hue depends on the wave height. The curve on the right shows the wave height along a vertical strip near the right boundary. The boundary conditions are oscillating at the left, absorbing at the right, reflecting at the mid horizontal line, and given by a one-dimensional wave at the top and bottom.
Render time: 1 hour 14 minutes
Compression: crf 25
Color scheme: Turbo, by Anton Mikhailov
gist.github.com/mikhailov-work/6a308c20e494d9e0ccc29036b28faa7a
Music: "Smooth Ridin" by Huma-Huma
See also
https://images.math.cnrs.fr/des-ondes-dans-mon-billard-partie-i/ for more explanations (in French) on a few previous simulations of wave equations.
The simulation solves the wave equation by discretization. The algorithm is adapted from the paper hplgit.github.io/fdm-book/doc/pub/wave/pdf/wave-4print.pdf
C code: github.com/nilsberglund-orleans/YouTube-simulations
https://www.idpoisson.fr/berglund/software.html
Many thanks to Marco Mancini and Julian Kauth for helping me to accelerate my code!
#wave #obstacles #diffraction
This is a 3D representation of a simulation similar to the video youtu.be/RWp664Qm5rs , comparing the effect of an invisibility cloak when it hides an object and when it does not, where the z-coordinate and the color both represent the wave height.
The purpose of the cloak is to hide an object in its center, by reconstructing waves that interfere with the object and the cloak in such a way that they resemble the original incoming wave, in this case a planar wave coming from the left. If the reconstruction were perfect, an observer located further to the right would not be able to know the cloaked object's existence. There is almost no difference between the halves with and without a cloaked object. This implies that while the observer will notice some disturbance, he will not be able to know what it is caused by.
The cloak consists in 200 circles placed on 5 concentric layers of 40 circles each. It is the first, non-optimized design proposed in the article sciencedirect.com/science/article/abs/pii/S0165212514001759
Many simulations of the wave equation in a domain on this channel used Dirichlet boundary conditions, meaning that the wave height is zero at the boundary of the domain. This is a good model for an elastic membrane, for instance for a drum, or for sound waves. For water waves, however, it would be more realistic to use Neumann boundary conditions, meaning the the wave height has a horizontal tangent at the boundary.
Dirichlet boundary conditions are very easy to implement in a finite difference scheme: it suffices to keep the wave height equal to zero outside the domain, and use this zero value when computing the discrete Laplacian. For Neumann boundary conditions, however, one has to implement the condition that the normal derivative of the wave height is zero at the boundary. This is implemented here by adding "ghost" points next to the grid points in the domain, and computing their value in such a way that the normal derivative is approximately zero. These points are then used to compute the discrete Laplacian at points in the domain next to the boundary.
The color hue depends on the wave height. The curve on the right shows the wave height along a vertical strip near the right boundary. The boundary conditions are oscillating at the left, absorbing at the right, reflecting at the mid horizontal line, and given by a one-dimensional wave at the top and bottom.
Render time: 1 hour 14 minutes
Compression: crf 25
Color scheme: Turbo, by Anton Mikhailov
gist.github.com/mikhailov-work/6a308c20e494d9e0ccc29036b28faa7a
Music: "Smooth Ridin" by Huma-Huma
See also
https://images.math.cnrs.fr/des-ondes-dans-mon-billard-partie-i/ for more explanations (in French) on a few previous simulations of wave equations.
The simulation solves the wave equation by discretization. The algorithm is adapted from the paper hplgit.github.io/fdm-book/doc/pub/wave/pdf/wave-4print.pdf
C code: github.com/nilsberglund-orleans/YouTube-simulations
https://www.idpoisson.fr/berglund/software.html
Many thanks to Marco Mancini and Julian Kauth for helping me to accelerate my code!
#wave #obstacles #diffraction










