Uploaded June 2026 | Updated November 2026, 6 hours ago
In brewing there is one ingredient you may not pay much attention to. Water.
Many people simply accept that whatever comes out of their tap is what they have to use. Of course some do have filters, well water, or otherwise process their water. Others again buy bottled water. The most extreme example commonly seen is distilled water.
These run the range of any and all possible chemicals in your water that are considered safe. Common examples include chlorine and ammonia based sterilising agents. These same chemicals can effect your brewing endeavours.
Filtered water has less of these chemicals. Distilled water should have none. Well water is also generally free of these chemicals.
The most pure water you can get is reverse osmosis water and this should only water and absolutely nothing else. However this is not needed for most brewing. In fact reverse osmosis is not needed at all as brewing requires some content in the water.
If you are starting with completely bank water like reverse osmosis or even distilled water you need to add something called brewing salts. These are either single chemicals or even elements and sometimes a mixture of one or two things.
Why you add these salts is simple. It changes pH, enzyme activity, flavour, and more.
If we were to summarise common salts used they would be:
Gympsum or calcium sulphate
Calcium chloride
Epsom salt or magnesium sulphate
Table salt or sodium chloride
Baking soda or sodium bicarbonate
Chalk or calcium carbonate
You are not adding brewing salts like these in large amounts. Lets be very clear about this. The amount you use is measured in parts per a million to parts per a billion. These are tiny amounts.
Even when talking about ppm or ppb a small error can cause massive issues. That is why you use such small amounts.
Further some salts can interact or cause unexpected reactions that complicate your brew.
In brewing there is one ingredient you may not pay much attention to. Water.
Many people simply accept that whatever comes out of their tap is what they have to use. Of course some do have filters, well water, or otherwise process their water. Others again buy bottled water. The most extreme example commonly seen is distilled water.
These run the range of any and all possible chemicals in your water that are considered safe. Common examples include chlorine and ammonia based sterilising agents. These same chemicals can effect your brewing endeavours.
Filtered water has less of these chemicals. Distilled water should have none. Well water is also generally free of these chemicals.
The most pure water you can get is reverse osmosis water and this should only water and absolutely nothing else. However this is not needed for most brewing. In fact reverse osmosis is not needed at all as brewing requires some content in the water.
If you are starting with completely bank water like reverse osmosis or even distilled water you need to add something called brewing salts. These are either single chemicals or even elements and sometimes a mixture of one or two things.
Why you add these salts is simple. It changes pH, enzyme activity, flavour, and more.
If we were to summarise common salts used they would be:
Gympsum or calcium sulphate
Calcium chloride
Epsom salt or magnesium sulphate
Table salt or sodium chloride
Baking soda or sodium bicarbonate
Chalk or calcium carbonate
You are not adding brewing salts like these in large amounts. Lets be very clear about this. The amount you use is measured in parts per a million to parts per a billion. These are tiny amounts.
Even when talking about ppm or ppb a small error can cause massive issues. That is why you use such small amounts.
Further some salts can interact or cause unexpected reactions that complicate your brew.