Uploaded December 2021 | Updated September 2026, 1 week ago
Today I have something different. Today I will introduce you to TIG or GTAW welding. I got my TIG welding paper back in june and had a TIG welding machine since august, but I had some set backs with connecting the device to the argon. I fixed that and will now show you my TIG welding setup en talk about some basic stuff. I hop to do more video's, but I think I will do some projects in the spring because it is way too cold right now :)
Thanks for watching!
If you liked this video, please give it a thumbs up, leave a comment and do not forget to subscribe!
See you next week!
The Furnaces I use: FB1SB Devil Forge 4kg
The self made 10kg furnace I use with devil forge DFC burner: youtube.com/watch?v=XjRe3TLbt7c
The lifter tong I use: youtube.com/watch?v=MLS2xmILPrY&t=375s
I edit my videos with: Videopad video editor
Help support my channel, buy official merchandise!
teespring.com/metalscrapper
Disclaimer: Please be aware that working with hot liquid metals is very dangerous! Do not try this at home if you do not exactly know what you do. I have done a lot of preparation and informed myself before I did my first pour.
If you do so, make sure to wear proper personal protection gear like a full face shield, a respirator, a dusk mask, fire retarding clothing or a leather apron, good protective and heat resistant gloves and leather boots. Make sure to work safe and use proper foundry tools.
Finally enjoy the hobby!
Today I have something different. Today I will introduce you to TIG or GTAW welding. I got my TIG welding paper back in june and had a TIG welding machine since august, but I had some set backs with connecting the device to the argon. I fixed that and will now show you my TIG welding setup en talk about some basic stuff. I hop to do more video's, but I think I will do some projects in the spring because it is way too cold right now :)
Thanks for watching!
If you liked this video, please give it a thumbs up, leave a comment and do not forget to subscribe!
See you next week!
The Furnaces I use: FB1SB Devil Forge 4kg
The self made 10kg furnace I use with devil forge DFC burner: youtube.com/watch?v=XjRe3TLbt7c
The lifter tong I use: youtube.com/watch?v=MLS2xmILPrY&t=375s
I edit my videos with: Videopad video editor
Help support my channel, buy official merchandise!
teespring.com/metalscrapper
Disclaimer: Please be aware that working with hot liquid metals is very dangerous! Do not try this at home if you do not exactly know what you do. I have done a lot of preparation and informed myself before I did my first pour.
If you do so, make sure to wear proper personal protection gear like a full face shield, a respirator, a dusk mask, fire retarding clothing or a leather apron, good protective and heat resistant gloves and leather boots. Make sure to work safe and use proper foundry tools.
Finally enjoy the hobby!
