Uploaded August 2015 | Updated September 2026, 2 weeks ago
Frame
xhover.com/products/mxp180-fpv-quadcopter
Motors
xhover.com/collections/new-products/products/1306-3100kv-motors
Props
xhover.com/collections/new-products/products/copy-of-gemfan-5x3-propellers
Description
The Xhover MXP180 is a small portable mini quadcopter that is capable of carrying the same FPV equipment as a bigger 230-250 size. Its unique design sets it apart from the rest. It's manufactured with high quality carbon fiber allowing this frame to be just as durable as its bigger brother the MXP230. The MXP180 is designed to support larger size motors such as 1306, 1806, 2204, 2206, M2 and M3 motor mount screws.
Built in Power Distribution Board With LED's (PDB)
Wiring the MXP180 is simple, due in part to possessing a power distribution board (PDB) that has built in low profile LED lights (blue up front and red in the back). It supports 3-4s power.
Vibrations Free Video
The MXP180 is designed to resist vibration and generate jello free video. The thick 3mm unibody plate helps to isolate vibrations and jello, resulting in perfect HD video.
Weight
Frame: 90g
AUW: 275g including all electronics and FPV gear
What's included
1 x Unibody Main frame
1 x Middle Plate
1 x Bottom plate with built in PDB and LED's
1 x HD Camera mount
12 x anodized red standoffs 15mm
18 x button head hex screws for assembly
2 x Long Button head hex screws from front standoffs
1 x Neoprene Tape for HD camera
1 x Xhover Battery strap
1 x Allen Key for M3 screws
Suggested Components
Motors: Xhover 1306 3000kv, 1806 2300kv
Propellers: GemFan 4x5
ESC: 12A
Battery: 3s best performance on 4s 850mah supports 4s 1300mah
Flight Controller: CC3D, Naze32, Flip MWC
Receiver: Spekctrum, Frsky, Futaba
CCD Camera: Sony 600tvl
HD Camera: GoPro, Mobius Action Cam, FunCam HD
Video Transmitter: Aomway 200mw
Antenna: Clover Leaf (SMA)
Antenna: SMA Male to SMA female bulkhead right angle 10cm
Frame
xhover.com/products/mxp180-fpv-quadcopter
Motors
xhover.com/collections/new-products/products/1306-3100kv-motors
Props
xhover.com/collections/new-products/products/copy-of-gemfan-5x3-propellers
Description
The Xhover MXP180 is a small portable mini quadcopter that is capable of carrying the same FPV equipment as a bigger 230-250 size. Its unique design sets it apart from the rest. It's manufactured with high quality carbon fiber allowing this frame to be just as durable as its bigger brother the MXP230. The MXP180 is designed to support larger size motors such as 1306, 1806, 2204, 2206, M2 and M3 motor mount screws.
Built in Power Distribution Board With LED's (PDB)
Wiring the MXP180 is simple, due in part to possessing a power distribution board (PDB) that has built in low profile LED lights (blue up front and red in the back). It supports 3-4s power.
Vibrations Free Video
The MXP180 is designed to resist vibration and generate jello free video. The thick 3mm unibody plate helps to isolate vibrations and jello, resulting in perfect HD video.
Weight
Frame: 90g
AUW: 275g including all electronics and FPV gear
What's included
1 x Unibody Main frame
1 x Middle Plate
1 x Bottom plate with built in PDB and LED's
1 x HD Camera mount
12 x anodized red standoffs 15mm
18 x button head hex screws for assembly
2 x Long Button head hex screws from front standoffs
1 x Neoprene Tape for HD camera
1 x Xhover Battery strap
1 x Allen Key for M3 screws
Suggested Components
Motors: Xhover 1306 3000kv, 1806 2300kv
Propellers: GemFan 4x5
ESC: 12A
Battery: 3s best performance on 4s 850mah supports 4s 1300mah
Flight Controller: CC3D, Naze32, Flip MWC
Receiver: Spekctrum, Frsky, Futaba
CCD Camera: Sony 600tvl
HD Camera: GoPro, Mobius Action Cam, FunCam HD
Video Transmitter: Aomway 200mw
Antenna: Clover Leaf (SMA)
Antenna: SMA Male to SMA female bulkhead right angle 10cm
