Uploaded September 2026 | Updated November 2026, 2 hours ago
The stacking workflow is actually pretty easy in PixInsight. Start with the Blink tool. Use this to quickly scan through your Light Frames and find any bad photos. I like to do a first pass from a zoomed-out perspective. This helps me to see any clouds or twilight light. When you find a bad photo, note the file name and go back to the folder. Delete the file through your Explorer / Finder.
Repeat this process while zoomed into the photos, you need to find images with blurry / streaked stars. Delete these photos as well.
With all the bad photos deleted we can continue on with the stacking workflow.
Search for WeightedBatchPreProcessing in the Process Explorer.
The WBPP script will seem intimidating at first, but it shouldn't take more than 1 or 2 minutes to complete.
If you have any images currently loaded into WBPP, hit the "Clear" button to remove them.
Next, click the "+ Lights" button at the bottom of WBPP and select all of your Light Frames. Monochrome shooters will need to grab the full set of Lights from each filter. WBPP should automatically separate them based on the Filter header.
With the Light Frames loaded in, click the little black folder icon under Output Directory. Create a new PixStack folder in your target directory. "Deep Space Astro - 2026 - Soul Nebula - PixStack". Be sure to create a new folder every time you stack!
Next, click the gear icon on the Astrometric Solution header. Copy the RA and Dec Coordinates over, along with the Date and Time, Focal Length, and Pixel Size. You will need to do this every time you stack as well.
If you took calibration frames you can add those next.
I like to go to the Calibration header next and turn off the "Automatic" Cosmetic Correction. The Automatic Cosmetic Correction will try to use a Master Dark Frame, which I don't have. So I'd rather just leave this turned off to be safe. Beyond that, everything else should be good to go.
You can click Run to begin the stack.
If you see a purple text warning about long file names, you may want to head into your registry and enable Long File Paths. Just google "Enable Long File Paths Windows 11" and Gemini will show exactly what to do.
When the stack is finished, the final step is to go back to the PixStack directory. Delete every folder inside except for Master. The registered, calibrated, debayared, etc... are filled with temporary files. These can quickly fill up your hard drive so it's best to delete them. Inside the Master folder you will find your final stacked images.
00:00 - Inspect Photos with Blink
02:48 - WeightedBatchPreProcessing
03:17 - Add Lights
04:15 - Create PixStack Folder
05:09 - Astrometric Solution
07:11 - Presets
07:56 - Calibration Frames
08:33 - Calibration
09:45 - Post-Calibration
10:22 - Recap
10:48 - Begin Stack
11:23 - Post Stack Cleanup
12:14 - Find Master File
The stacking workflow is actually pretty easy in PixInsight. Start with the Blink tool. Use this to quickly scan through your Light Frames and find any bad photos. I like to do a first pass from a zoomed-out perspective. This helps me to see any clouds or twilight light. When you find a bad photo, note the file name and go back to the folder. Delete the file through your Explorer / Finder.
Repeat this process while zoomed into the photos, you need to find images with blurry / streaked stars. Delete these photos as well.
With all the bad photos deleted we can continue on with the stacking workflow.
Search for WeightedBatchPreProcessing in the Process Explorer.
The WBPP script will seem intimidating at first, but it shouldn't take more than 1 or 2 minutes to complete.
If you have any images currently loaded into WBPP, hit the "Clear" button to remove them.
Next, click the "+ Lights" button at the bottom of WBPP and select all of your Light Frames. Monochrome shooters will need to grab the full set of Lights from each filter. WBPP should automatically separate them based on the Filter header.
With the Light Frames loaded in, click the little black folder icon under Output Directory. Create a new PixStack folder in your target directory. "Deep Space Astro - 2026 - Soul Nebula - PixStack". Be sure to create a new folder every time you stack!
Next, click the gear icon on the Astrometric Solution header. Copy the RA and Dec Coordinates over, along with the Date and Time, Focal Length, and Pixel Size. You will need to do this every time you stack as well.
If you took calibration frames you can add those next.
I like to go to the Calibration header next and turn off the "Automatic" Cosmetic Correction. The Automatic Cosmetic Correction will try to use a Master Dark Frame, which I don't have. So I'd rather just leave this turned off to be safe. Beyond that, everything else should be good to go.
You can click Run to begin the stack.
If you see a purple text warning about long file names, you may want to head into your registry and enable Long File Paths. Just google "Enable Long File Paths Windows 11" and Gemini will show exactly what to do.
When the stack is finished, the final step is to go back to the PixStack directory. Delete every folder inside except for Master. The registered, calibrated, debayared, etc... are filled with temporary files. These can quickly fill up your hard drive so it's best to delete them. Inside the Master folder you will find your final stacked images.
00:00 - Inspect Photos with Blink
02:48 - WeightedBatchPreProcessing
03:17 - Add Lights
04:15 - Create PixStack Folder
05:09 - Astrometric Solution
07:11 - Presets
07:56 - Calibration Frames
08:33 - Calibration
09:45 - Post-Calibration
10:22 - Recap
10:48 - Begin Stack
11:23 - Post Stack Cleanup
12:14 - Find Master File










