Uploaded September 2026 | Updated November 2026, 1 day ago
One of the more difficult aspects of astrophotography is the initial setup. The instructions are often confusing and there are lots of conflicting statements online. Thankfully the gear I recommended in the previous video is all very easy to install. This should only take about 10 minutes.
If you encounter any errors in the ASIAir, where different components aren't showing up, try swapping out the USB or power cables and see if that fixes the issue. Also, be sure to verify all the power switches are turned on, including the battery, mount, and ASIAir.
00:00 - Initial Gear Inspection
02:31 - Attach Camera to Telescope
03:48 - Install 2" Filter
04:15 - Monochrome EFW
04:36 - CAA
05:31 - Setup Mount
06:51 - 2600 Air Cables
08:01 - Traditional Cables
09:56 - First Focus
One of the more difficult aspects of astrophotography is the initial setup. The instructions are often confusing and there are lots of conflicting statements online. Thankfully the gear I recommended in the previous video is all very easy to install. This should only take about 10 minutes.
If you encounter any errors in the ASIAir, where different components aren't showing up, try swapping out the USB or power cables and see if that fixes the issue. Also, be sure to verify all the power switches are turned on, including the battery, mount, and ASIAir.
00:00 - Initial Gear Inspection
02:31 - Attach Camera to Telescope
03:48 - Install 2" Filter
04:15 - Monochrome EFW
04:36 - CAA
05:31 - Setup Mount
06:51 - 2600 Air Cables
08:01 - Traditional Cables
09:56 - First Focus










