Uploaded March 2026 | Updated September 2026, 13 hours ago
Learn how to set up your Intex Prism Frame Rectangular Pool in 10 easy steps:
*Preparing your space for an above-ground pool – 00:11
1. Unfold and spread out the ground cloth. Unfold the pool liner over the ground cloth -- 00:47
2. Lay out horizontal beams in A-B-B-C order for the long side and then the F-D beams for the short side – 01:12
3. Connect horizontal beams on the long side, snap in to secure – 01:28
4. Insert the connected horizontal beam into the pool liner’s sleeve – 01:38
5. Connect F-D beams and insert them into the short side sleeve – 01:43
6. Insert the corner joints into the horizontal beams – 01:52
7. Hook the U-shaped side supports through the restrainer straps – 02:15
8. Insert the U-shaped side supports into the holes of the horizontal beams and secure them with the spring-loaded clip – 02:28
9. Pull the bottoms of the side supports away from the liner to make the straps taut – 02:38
10. Ensure the inside and outside drain caps are closed – 02:44
Learn how to set up your Intex Prism Frame Rectangular Pool in 10 easy steps:
*Preparing your space for an above-ground pool – 00:11
1. Unfold and spread out the ground cloth. Unfold the pool liner over the ground cloth -- 00:47
2. Lay out horizontal beams in A-B-B-C order for the long side and then the F-D beams for the short side – 01:12
3. Connect horizontal beams on the long side, snap in to secure – 01:28
4. Insert the connected horizontal beam into the pool liner’s sleeve – 01:38
5. Connect F-D beams and insert them into the short side sleeve – 01:43
6. Insert the corner joints into the horizontal beams – 01:52
7. Hook the U-shaped side supports through the restrainer straps – 02:15
8. Insert the U-shaped side supports into the holes of the horizontal beams and secure them with the spring-loaded clip – 02:28
9. Pull the bottoms of the side supports away from the liner to make the straps taut – 02:38
10. Ensure the inside and outside drain caps are closed – 02:44
