Uploaded March 2026 | Updated September 2026, 1 hour ago

---

Learn how to set up your Intex Mariner 260 & 310 Transom Boat in 11 easy steps:

1. Inflate by removing the valve cap and turning the valve stem clockwise – 00:10
2. Screw inflation hose into the pump port – 00:23
3. Inflate all the chambers of the boat – 00:26
4. Inflate the boat until it’s 80% full and then remove the hose and place the valve cap on – 00:33
5. Place the inflatable floor on the bottom of the boat – 00:39
6. Insert the ends of the seat into the connectors – 00:50
7. Inflate the floor, hull, and keel – 00:59
8. Check the PSI – 01:08
9. Assemble the oars and lock them on the assembly – 01:11
10. If you have a motor, attach it to the engine mount plate – 01:31
11. Turn the self-bailer valve to lock position to prevent water from entering – 01:37