Uploaded June 2022 | Updated September 2026, 3 days ago
In Part 2 of the Pioneer Touch Probe installation on the SYIL X7, I move on to the calibration, testing, and verification process using the Syntec 22MA control.
This video covers the steps used to calibrate the probe, enter the required setup values, verify probe length, and confirm that the probing routines are working correctly on the machine.
I also show the Syntec screens involved in the calibration process and demonstrate the probe working on the machine so you can see how the setup behaves in real use.
Machine: SYIL X7
Control: Syntec 22MA
Probe: Pioneer Touch Probe
This is Part 2 of the series and follows the initial installation and setup covered in Part 1.
If you own a SYIL X7 or use a Syntec 22MA control, subscribe for more probing tutorials, setup guides, macros, troubleshooting, and CNC tips.
#SYIL #SYILX7 #Syntec #Syntec22MA #PioneerProbe #CNC #CNCMachining #TouchProbe #ProbeCalibration
In Part 2 of the Pioneer Touch Probe installation on the SYIL X7, I move on to the calibration, testing, and verification process using the Syntec 22MA control.
This video covers the steps used to calibrate the probe, enter the required setup values, verify probe length, and confirm that the probing routines are working correctly on the machine.
I also show the Syntec screens involved in the calibration process and demonstrate the probe working on the machine so you can see how the setup behaves in real use.
Machine: SYIL X7
Control: Syntec 22MA
Probe: Pioneer Touch Probe
This is Part 2 of the series and follows the initial installation and setup covered in Part 1.
If you own a SYIL X7 or use a Syntec 22MA control, subscribe for more probing tutorials, setup guides, macros, troubleshooting, and CNC tips.
#SYIL #SYILX7 #Syntec #Syntec22MA #PioneerProbe #CNC #CNCMachining #TouchProbe #ProbeCalibration
