Uploaded February 2021 | Updated September 2026, 1 hour ago
1. Pull off the two plastic covers on the arms .
2. Then, remove the stock facial interface and pull out the top strap.
3. Next, slip the VR Cover headstrap plastic holders onto the arms, snapping in the back to attach.
4. Pass the T-strap through the loop on the single strap.
5. Attach the T-strap to the headset next by sliding in the tip at a 45 degree angle.
6. Pull the strap through and attach the Velcro to the top.
7. Secure the ends of the single strap by looping over the sides as shown.
vrcover.com/regional-stores
1. Pull off the two plastic covers on the arms .
2. Then, remove the stock facial interface and pull out the top strap.
3. Next, slip the VR Cover headstrap plastic holders onto the arms, snapping in the back to attach.
4. Pass the T-strap through the loop on the single strap.
5. Attach the T-strap to the headset next by sliding in the tip at a 45 degree angle.
6. Pull the strap through and attach the Velcro to the top.
7. Secure the ends of the single strap by looping over the sides as shown.
vrcover.com/regional-stores
