Uploaded July 2024 | Updated November 2026, 3 hours ago
#Shinobi #CCTV #RaspberryPi
Full steps can be found at i12bretro.github.io/tutorials/0550.html
--------------------------------------------------------------------
What is Shinobi?
--------------------------------------------------------------------
Shinobi is Open Source, written in Node.js, and real easy to use. It is the future of CCTV and NVR for developers and end-users alike. It is catered to by professionals and most importantly by the one who created it. - shinobi.video
--------------------------------------------------------------------
Install Shinobi
--------------------------------------------------------------------
01. Log into the Raspberry Pi
02. Run the following commands in a terminal:
# update software repositories
sudo apt update
# install software updates
sudo apt upgrade -y
# install pre-requisites
sudo apt install git -y
# clone shinobi code
git clone gitlab.com/Shinobi-Systems/Shinobi.git Shinobi
# change directory to Shinobi
cd Shinobi
# set permissions
sudo chmod +x INSTALL/ubuntu.sh
# execute the installation script
sudo INSTALL/ubuntu.sh
03. Answer Yes (y) when asked to install MariaDB
04. Input a password for the root MariaDB user account
05. Answer Yes (y) when asked to install the Shinobi database
06. Enter root when asked for the database user
07. Enter the root password created earnlier when asked for the database password
08. Answer Yes (y) when asked to start Shinobi and start it on boot
09. Open a web browser and navigate to http://DNSorIP:8080/super
10. Login with the username admin@shinobi.video and password admin
11. Select Preferences from the top navigation menu
12. Change the admin user email address and enter and confirm a new password
13. Click Save at the top of the page
14. Welcome to Shinobi
Source: shinobi.video/docs
### Connect with me and others ###
★ Discord: discord.com/invite/EzenvmSHW8
★ Reddit: reddit.com/r/i12bretro
★ Twitter: twitter.com/i12bretro
#Shinobi #CCTV #RaspberryPi
Full steps can be found at i12bretro.github.io/tutorials/0550.html
--------------------------------------------------------------------
What is Shinobi?
--------------------------------------------------------------------
Shinobi is Open Source, written in Node.js, and real easy to use. It is the future of CCTV and NVR for developers and end-users alike. It is catered to by professionals and most importantly by the one who created it. - shinobi.video
--------------------------------------------------------------------
Install Shinobi
--------------------------------------------------------------------
01. Log into the Raspberry Pi
02. Run the following commands in a terminal:
# update software repositories
sudo apt update
# install software updates
sudo apt upgrade -y
# install pre-requisites
sudo apt install git -y
# clone shinobi code
git clone gitlab.com/Shinobi-Systems/Shinobi.git Shinobi
# change directory to Shinobi
cd Shinobi
# set permissions
sudo chmod +x INSTALL/ubuntu.sh
# execute the installation script
sudo INSTALL/ubuntu.sh
03. Answer Yes (y) when asked to install MariaDB
04. Input a password for the root MariaDB user account
05. Answer Yes (y) when asked to install the Shinobi database
06. Enter root when asked for the database user
07. Enter the root password created earnlier when asked for the database password
08. Answer Yes (y) when asked to start Shinobi and start it on boot
09. Open a web browser and navigate to http://DNSorIP:8080/super
10. Login with the username admin@shinobi.video and password admin
11. Select Preferences from the top navigation menu
12. Change the admin user email address and enter and confirm a new password
13. Click Save at the top of the page
14. Welcome to Shinobi
Source: shinobi.video/docs
### Connect with me and others ###
★ Discord: discord.com/invite/EzenvmSHW8
★ Reddit: reddit.com/r/i12bretro
★ Twitter: twitter.com/i12bretro



![Install Organizr - A Homelab Services Organizer/Dashboard - on Windows
#Organizr #Dashboard #Windows
Full steps can be found at https://i12bretro.github.io/tutorials/0796.html
What is Organizr?
ORGANIZR aims to be your one stop shop for your Servers Frontend. Do you have quite a bit of services running on your computer or server? Do you have a lot of bookmarks or have to memorize a bunch of ip’s and ports? Well, Organizr is here to help with that... - https://organizr.app/
Installation
01. Download XAMPP https://sourceforge.net/projects/xampp/files/XAMPP%20Windows/
02. Download Organizr https://github.com/causefx/Organizr
03. Download Microsoft Visual C++ https://aka.ms/vs/16/release/vc_redist.x64.exe
04. Install Microsoft Visual C++
05. Right click the downloaded XAMPP file ≫ Extract All...
06. Right click the downloaded Organizr .zip file ≫ Extract All...
07. Rename the extracted folder organizr
08. Cut the organizr folder inside the XAMPP/htdocs directory
09. Copy the extracted XAMPP directory to a safe location to run from, C:Program Files for example
10. Navigate into XAMPP/PHP and edit php.ini in a text editor
11. Find the list of extensions and make sure the following are enabled by removing the ; at the start of the line
extension=pdo_sqlite
extension=curl
extension=sqlite3
12. Save the changes to php.ini
13. Navigate into XAMPP/Apache/conf and edit httpd.conf in a text editor
14. Search the file for
15. Overwrite the existing values with the following
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^ /organizr/api/v2/index.php [QSA,L]
16. Run XAMPP/setup_xampp.bat to update the configuration files with the new server location
17. Run XAMPP/xampp-control.exe
18. Click the Start button next to Apache
19. Back in File Explorer, while holding Shift, right click in the whitespace ≫ Open PowerShell window here
20. Run the following command in the open PowerShell window to generate a random string
[Convert]::ToBase64String((1..20|%{[byte](Get-Random -Max 256)}))
21. Open a web browser and navigate to http://DNSorIP/organizr
22. Set the Installation Type to Personal ≫ Click Next
23. Complete the registration form by entering a username, email address and password ≫ Click Next
24. Copy the randomly generated string from PowerShell and paste it in the Hash Key field
25. Enter a Registration Password ≫ Click Next
26. Enter organizr.db as the Database Name and C:Program Filesxampphtdocsorganizrdata as the Database Path ≫ Click Test / Create Path ≫ Click Next
27. Review the summary ≫ Click Finish
28. Welcome to Organizr
Source: https://docs.organizr.app/installation/prerequisites/installing-php
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Install Organizr - A Homelab Services Organizer/Dashboard - on Windows](https://i.ytimg.com/vi/9zgbi-1MwKk/mqdefault.jpg)
![Update OpenCore with HackinDROM
#OpenCore #HackinDROM #MacOS
Full steps can be found at https://i12bretro.github.io/tutorials/0838.html
What is HackinDROM?
[HackinDROM is an] OpenCore bootloader EFI updater [that] works on macOS Catalina and newer. - https://github.com/Inqnuam/HackinDROM
Things You Will Need
- A USB flash drive at least 512 MB https://amzn.to/3wkR5ju | https://amzn.to/3qkrJ1p | https://amzn.to/3Nhu9b9
01. Download HackinDROM https://hackindrom.zapto.org/app/public/HackinDROM.zip
02. Open Downloads in Finder
03. Right click HackinDROM ≫ Open ≫ Click OK to confirm opening the application
04. Click on HackinDROM in the menu bar
05. Click Skip to skip setting up the motherboard settings
06. Click Mount across from the current startup disk
07. Authenticate to allow mounting the EFI partition
08. Copy the EFI folder from the EFI partition to a USB flash drive as a backup in the event MacOS wont boot after updating OpenCore
09. Back in HackinDROM, right click the current startup disk ≫ Update
10. After the update completes, double click Unmount across from the current startup disk
11. Reboot MacOS to verify the system still boots successfully
Source: https://www.tonymacx86.com/threads/hackindrom-app-for-opencore-efi-creation-and-update.312176/
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Update OpenCore with HackinDROM](https://i.ytimg.com/vi/AW65Q8FMZl4/mqdefault.jpg)
![Running a MacOS 15 Sequoia VM in Proxmox VE
#MacOS #Sequoia #Proxmox #VirtualMachine
Full steps can be found at https://i12bretro.github.io/tutorials/0944.html
💡 NOTE: MacOS higher than version 12 requires a CPU with AVX2 instruction support
01. Download a MacOS Sequoia .iso https://archive.org/search.php?query=MacOS%2015&and[]=mediatype%3A%22software%22 OR create your own https://youtu.be/JFMvUpdCMwo
02. Download KVM OpenCore bootloader https://github.com/thenickdude/KVM-Opencore/releases
03. Extract the downloaded KVM OpenCore bootloader .gz file
04. Upload the Sequoia and KVM OpenCore .iso files to the Proxmox ISO library
05. Log into the ProxMox web UI
06. Right click the ProxMox node name ≫ Create VM
07. Type MacOSSequoia in the name field, set the VM ID to 1500 (unless 1500 is in use) ≫ Next
08. On the OS tab, set the Type field to Other and select the KVM OpenCore .iso in the ISO Image field ≫ Next
09. On the System tab, set the Graphic card field to VMware compatible, BIOS field to OVMF (UEFI), Uncheck the Pre-Enroll Keys checkbox, Check the Add EFI Disk checkbox, Machine field to q35 and the SCSI Controller to VirtIO SCSI ≫ Next
10. On the Hard Disk tab, set the Bus/Device field to VirtIO Block, Disk size field to 64, Cache field to Write back (unsafe) ≫ Next
11. On the CPU tab, set Cores field to 4, Type field to host ≫ Next
12. On the Memory tab, set the Memory to 8192 or more ≫ Next
13. On the Network tab, set the Model field to VMware vmxnet3 ≫ Next
14. Verify the summary and click Finish
15. Click the MacOSSequoia VM ≫ Select Hardware from the left sub-navigation menu
16. Click Add ≫ CD/DVD Drive
17. Select the MacOS Sequoia .iso downloaded earlier ≫ Click Add
18. Right click the Proxmox node name ≫ Console
19. Run the following commands in the terminal
# edit the VM conf file, change 1500 to the VM ID for the MacOSSequoia VM
nano /etc/pve/qemu-server/1500.conf
20. If running on an Intel CPU, add the following line to the bottom of the .conf file:
FULL STEPS ON GITHUB LINK ABOVE
21. If running on an AMD CPU, add the following line to the bottom of the .conf file:
FULL STEPS ON GITHUB LINK ABOVE
22. Press CTRL+W and search for ,media=cdrom
23. Delete the ,media=cdrom from the two attached .iso files (KVM OpenCore and Sequoia) and add cache=unsafe
24. Press CTRL+O, Enter, CTRL+X to write the changes to the conf file
25. Back in the Proxmox web UI, right click the MacOSSequoia VM in the left navigation pane ≫ Start
26. Click console in the left sub-navigation menu
27. At the OpenCore menu press Enter to start the MacOS installer
28. If Install MacOS isnt an option select UEFI Shell ≫ Press Enter
29. Type the following in the UEFI shell:
# change to the Sequoia.iso, the disk number may be different for you
fs0:
# launch the MacOS installer
SystemLibraryCoreServicesboot.efi
30. After a long initialization sequence the MAC OS Setup should start
31. Select Disk Utility
32. Select the VIRTIO Block Media ≫ Click Erase
33. Name the drive MacOS ≫ Set the Format to APFS ≫ Click Erase
34. Click Done ≫ Close Disk Utility
35. Click Install macOS Sequoia
36. Click Continue ≫ Click Agree ≫ Click Agree again
37. Select the MacOS disk ≫ Click Install
38. Wait while Mac OS installs files, the VM will reboot several times
39. Select your Country or Region ≫ Click Continue
40. Confirm your languages and keyboard layout ≫ Click Continue
41. Click Not Now on the Accessibility screen
42. Click Continue on the Data & Privacy screen
43. Select Not Now on the Migration Assistant screen
44. Select Set Up Later and then Skip on the Apple ID screen
45. Click Agree on the Terms and Conditions screen ≫ Agree again
46. Enter a name, user name, password ≫ Click Continue
47. Click Continue ≫ Select Use or Dont Use for Location Services
48. Pick a timezone ≫ Click Continue
49. Uncheck Share Mac Analytics with Apple ≫ Click Continue
50. Click Set Up Later on the Screen Time screen
51. Pick a theme ≫ Click Continue
52. Welcome to MacOS 15 Sequoia
Configuring Booting Without OpenCore Mounted
01. Log into the MacOSSequoia VM
02. Launch a web browser and download the KVM OpenCore EFI folder https://github.com/thenickdude/KVM-Opencore/releases
03. Download MountEFI from GitHub https://github.com/corpnewt/MountEFI
04. Start LaunchPad from the dock
05. Search terminal ≫ Click Terminal to launch it
06. Run the following commands in the terminal window
cd ~/Downloads/MountEFI-update
chmod +x MountEFI.command
./MountEFI.command
....Full steps can be found on GitHub [link at the top]
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Running a MacOS 15 Sequoia VM in Proxmox VE](https://i.ytimg.com/vi/ApldztEgh8o/mqdefault.jpg)

![Run LimeSurvey CE - Custom Survey Tool - in Docker
#LimeSurvey #Surveys #Docker
Full steps can be found at https://i12bretro.github.io/tutorials/1000.html
What is LimeSurvey?
[LimeSurvey is] a powerful, open-source survey platform. A free alternative to SurveyMonkey, Typeform, Qualtrics, and Google Forms, making it simple to create online surveys and forms with unmatched flexibility. - https://github.com/LimeSurvey/LimeSurvey
Installing Docker
01. Log into the Linux host and run the following commands in a terminal window
# install prerequisites
sudo apt install apt-transport-https ca-certificates curl software-properties-common gnupg-agent -y
# add docker gpg key
curl -fsSL https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release)/gpg | sudo apt-key add -
# add docker software repository
sudo add-apt-repository deb [arch=$(dpkg print-architecture)] https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release) $(lsb_release -cs) stable
# install docker
sudo apt install docker-ce docker-compose containerd.io -y
# enable and start docker service
sudo systemctl enable docker && sudo systemctl start docker
# add the current user to the docker group
sudo usermod -aG docker $USER
# reauthenticate for the new group membership to take effect
su - $USER
Running LimeSurvey Container
01. Continue with the following commands in a terminal window
# create working directories
mkdir ~/docker/limesurvey -p && mkdir ~/docker/mariadb -p
# set owner of docker directory
sudo chown $USER:$USER ~/docker -R
# allow the container to write to working directories
sudo chmod a+rwx -R ~/docker/limesurvey
# create containers network
docker network create containers
# run the mariadb docker container
docker run -d name mariadb network containers -e MYSQL_ROOT_PASSWORD=r00tp@$$ -e MYSQL_USER=limesurvey_rw -e MYSQL_PASSWORD=L!m3Surv3Y -e MYSQL_DATABASE=limesurvey -v ~/docker/mariadb:/var/lib/mysql -p 3306:3306 restart=unless-stopped mariadb:latest
# run the limesurvey container
docker run -d name limesurvey network containers -e DB_TYPE=mysql -e DB_HOST=mariadb -e DB_PORT=3306 -e DB_USERNAME=limesurvey_rw -e DB_PASSWORD=L!m3Surv3Y -e DB_NAME=limesurvey -e DB_TABLE_PREFIX= -e ADMIN_USER=admin -e ADMIN_NAME=administrator -e ADMIN_EMAIL=admin@change.me -e ADMIN_PASSWORD=SomethingSecure -v ~/docker/limesurvey:/var/www/html/upload/surveys -p 8080:8080 restart=unless-stopped martialblog/limesurvey
02. Open a web browser and navigate to http://DNSorIP:8080/index.php/admin/
03. Login using the admin credentials set in the environment variables
04. Welcome to LimeSurvey
Documentation: https://hub.docker.com/r/martialblog/limesurvey, https://github.com/martialblog/docker-limesurvey
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Run LimeSurvey CE - Custom Survey Tool - in Docker](https://i.ytimg.com/vi/BWJ7c4uGfac/mqdefault.jpg)


![Running Homepage Application Dashboard Using Docker
#Homepage #Dashboard #Docker
Full steps can be found at https://i12bretro.github.io/tutorials/0859.html
What is Homepage?
[Homepage is] a modern, fully static, fast, secure fully proxied, highly customizable application dashboard with integrations for over 100 services and translations into multiple languages. Easily configured via YAML files or through docker label discovery. - https://github.com/benphelps/homepage
Installing Docker
01. Log into the Linux Docker host and run the following commands in a terminal window
# install prerequisites
sudo apt install apt-transport-https ca-certificates curl software-properties-common gnupg-agent -y
# add docker gpg key
curl -fsSL https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release)/gpg | sudo apt-key add -
# add docker software repository
sudo add-apt-repository deb [arch=$(dpkg print-architecture)] https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release) $(lsb_release -cs) stable
# install docker
sudo apt install docker-ce docker-compose containerd.io -y
# enable and start docker service
sudo systemctl enable docker && sudo systemctl start docker
# add the current user to the docker group
sudo usermod -aG docker $USER
# reauthenticate for the new group membership to take effect
su - $USER
Running Homepage Application Dashboard
01. Continue with the following commands in a terminal window
# list current uid and gid, note these for later
id $user
# make a homepage directory to mount in the container
mkdir ~/homepage -p
# run the homepage docker image
# replace PUID, GUID with the output of the id $user command above
docker run -d name=homepage -e PUID=1000 -e PGID=1000 -p 8006:3000 -v ~/homepage:/app/config -v /var/run/docker.sock:/var/run/docker.sock restart unless-stopped ghcr.io/benphelps/homepage
02. Open a web browser and navigate to http://DNSorIP:8006
Source: https://gethomepage.dev/en/installation/docker
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Running Homepage Application Dashboard Using Docker](https://i.ytimg.com/vi/BzjL3tZ-NQs/mqdefault.jpg)